How to paste reflective strips on the truck, please everyone, thank you

It is convenient for reflection at night, so that the car behind pays attention to it, and safety needs.

Trouble, thanks!

Legal analysis: trucks and trailers that fail to install side and rear lower anti-aging devices and paste body reflective logos in accordance with the provisions will be fined 200 yuan.

Legal basis: "Road Traffic Safety Law of the People's Republic of China" Article 48 The load of motor vehicles shall conform to the approved load weight of the sail, and overloading is strictly prohibited; The length, width and height of the load shall not violate the loading requirements, and the load shall not be spilled or scattered. If a motor vehicle carries an item that cannot be disintegrated beyond the limit, affecting traffic safety, it shall drive in accordance with the time, route and speed designated by the traffic management department of the public security organ, and hang obvious signs.

The carriage of non-dismantling items that exceed the limit on the highway shall be carried out in accordance with the provisions of the Highway Law.

Motor vehicles carrying ** articles, flammable and explosive chemicals, as well as highly toxic, radioactive and other dangerous substances to clear land and hail goods, shall, after approval by the public security organs, drive at the designated time, route and speed, hang warning signs and take necessary safety measures.

1. How to punish trucks for not sticking reflective strips.

1. The truck will be fined 200 yuan if it does not stick reflective strips. Trucks, trailers not in accordance with the provisions of the installation of side and rear underrun protection devices, pasted body reflective logo, will be fined 200 yuan. Due to the slow speed and large body of the truck, if there is no eye-catching reflective sign to remind the driver of the rear car to keep the distance, it is easy to cause accidents.

2. Legal basis: Article 78 of the "Provisions on Motor Vehicle Registration".

In any of the following circumstances, the traffic management department of the public security organ shall give a warning or a fine of not more than 200 yuan:

1) The body or rear of the body or compartment of heavy-duty and medium-sized trucks, special operation vehicles, trailers and large passenger cars are not sprayed in accordance with the provisions of the enlarged brand or the enlarged brand is not clear;

2) Spraying or pasting signs or body advertisements on motor vehicles, affecting safe driving;

3) Trucks, special operation vehicles and trailers are not installed in accordance with the provisions of the side and rear underrun protection devices, pasted body reflective logos;

4) The motor vehicle fails to carry out safety technical inspection within the prescribed time limit;

5) Changing the color of the body, replacing the engine, body or frame, and failing to go through the registration of the change within the time limit provided for in Article 16;

6) After the transfer of ownership of a motor vehicle, the current owner of the motor vehicle fails to register the transfer within the time limit provided for in Article 25;

7) The owner of a motor vehicle fails to apply for the transfer of a motor vehicle to the vehicle management office at the place of residence within the time limit provided for in Articles 18 and 27 of the time limit for changing or transferring registration;

8) The owner of the motor vehicle fails to apply for a change of filing in accordance with the provisions of Article 23.

2. What are the conditions for constituting the crime of dangerous driving?

1. Chasing and racing, and the circumstances are heinous;

2. Driving a motor vehicle while intoxicated;

3. Engaged in school bus business or passenger transportation, seriously exceeding the rated occupant capacity, or seriously exceeding the prescribed speed;

4. Transporting hazardous chemicals in violation of the safety management regulations of hazardous chemicals, endangering public safety.

That's because the country's laws stipulate that trucks must be sprayed and pasted with reflective strips, so if you don't do this, there is no way to apply for a license, let alone go on the road. According to Article 13 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, all heavy goods vehicles or medium-sized trucks and some trailers must be hung with license plate numbers behind the body or behind the compartment.

And be sure to spray a large license plate on the back of the car or body. And according to the regulations, all the words must be particularly clear, otherwise it is not allowed to drive on the road. <>

The reason for these requirements is actually to wait for opportunities and the safety of others. Of course, the reason why the country has these regulations must also be for the sake of safety, we all know that large trucks generally go long distances, so many large trucks often rest on the road due to the long distance. Then at night, the big truck will definitely stop on the side of the road, and then many truck drivers will rest directly in the truck.

At this time, if there is no reflective strip on the car, it is actually more dangerous, because there are more vehicles on the side of the road, if there is a car behind at this time, but because the light is not very good at night, it is easy to have a traffic accident if you can't see us, but if you stick a reflective strip on the car, you can effectively avoid this phenomenon. <>

The truck is required to spray the magnification number, which is for better management and monitoring. Trucks, must be used to load goods, sometimes because the goods on the truck are more, so it will cover up the original license plate number of our truck, then many drivers will use this to exploit the loopholes of the law, often on the road red lights or speeding, etc. Therefore, in order to facilitate management and monitoring, it is required that large trucks must be sprayed with magnified numbers, so that even if the goods cover the license plate behind it, the license plate number of the car can be photographed.

All in all, in any case, large trucks on the road must pay attention to safety, and we must standardize driving. For the sake of your own safety and the safety of others, when you drive on the road, you must strictly abide by various traffic regulations and not drive tiredly.

Don't drink and drive. That's how everyone can be safe.

Because the truck is very large, if this reflective strip is not pasted, sometimes some people can't see the car when it passes, in order to avoid some unnecessary traffic accidents.

This is to prevent rear-end collisions when driving at night. When there is a vehicle in the rear, you only need to use the light to give a good warning to the vehicle.

To avoid being overlooked at night, the size of the truck is also relatively large, and if it is not detected in time, there will be a great safety hazard.

For driving safety, the height and volume of trucks are relatively large, and the driving lights at night shine on the reflective strips to find and avoid.

The standard for truck reflective tape is as follows: 33601. Paste ** reflective stickers, do not counterfeit and shoddy products.

**Reflective stickers with manufacturing trademarks, 3C certification marks, products and other information. If you don't have this information, it's a fake and shoddy product, so you must pay attention to it when buying reflective stickers. 2.

Reflective labels on the rear of the body must start with a white unit and end with a white unit. The intersection of the four corners of the rear body must be a white unit. Reflective stickers on the side of the body can start with a red unit, but the intersection between the side of the body and the rear of the body must be a white unit.

3.Do not punch holes or slots in reflective labels, and do not damage reflective labels.

4.Reflective stickers should not affect the normal functions of the vehicle, such as headlights, turn signals, etc.

5.The reflective sticker on the side of the body can be disconnected, but the reflective sticker should account for more than 50% of the entire side length of the body.

6.The length of each reflective sticker should not be less than 300 mm, and each reflective sticker should contain at least one red cell and one white cell.

7.The interval length of the auxiliary reflective tape should not be greater than 150mm.

8.The height of the reflective sticker on the side of the tricycle body from the ground should not be lower, if it is not good to post, install a baffle for posting.

Millions of car purchase subsidies.

1. Van low-speed trucks:

The reflective strip of the small van low-speed truck should be attached to the lower edge of the compartment, and the reflective sign of the rear body should outline the rear of the compartment, so that the rear compartment can clearly see the height of the compartment, and the four corners of the rear of the compartment are outlined with white units.

2. Low-speed driving of dump trucks:

After the horizontal direction pasted dump low-speed truck. In addition to the upper part of the tailgate, it should also be pasted in other places such as the lower part of the tailgate or the rear lower protector.

3.Flatbed:

The side body reflective sign is continuously pasted along the lower edge of the side of the flatbed truck and the surface layer is horizontally pasted.

The rational use of reflective strips on trucks can make passing cars and pedestrians immediately spot when driving at night. Moreover, the reflective strip is made of special materials, which has see-through, which can make up for the defects of the light in bad weather and improve the safety factor of driving.

Not only at night the reflective strip has a role, in the daytime, the car's reflective strip can make the body clearer, after the brightness of the sun socks is improved, it can remind the rear car to pay attention, prevent a little accident when driving, and increase the safety factor of driving. At the same time, the reflective strip on the truck can also play a role in the marker light, and if there is a lamp failure, the reflective strip can also play a role in ensuring safe driving.

The width of the body reflective logo material should be selected from the following values: 50mm, 75mm, 100mm 1, van low-speed truck: for some van low-speed trucks reflective strips should be pasted on the lower edge of the compartment, the rear body reflective logo should outline the outline of the rear of the compartment, so that the rear car can clearly see the height of the car, the four corners of the rear of the cargo compartment should be outlined with white units.

2. Dump low-speed trucks: Dump low-speed trucks are pasted in the horizontal direction of the rear, in addition to the upper part of the steeplechase should also be pasted in the lower part of the steeplechase or other positions such as the rear underrun protection device. 3. Flatbed trucks:

Side body reflective logos are affixed horizontally along a continuous, flat surface on the lower edge of the side of the flatbed truck. The reasonable use of reflective strips on trucks can make passing vehicles and pedestrians find out in time when driving at night, and the material of the reflective strips is special and has perspective, which can make up for the defects of the lights in bad weather and improve the safety of driving. Not only does the reflective strip play a role at night, but also during the day, the reflective strip of the car can make the body clearer, and after the brightness is improved, it can remind the rear car to pay attention to avoid some accidents when driving, which increases the safety of driving.

At the same time, the reflective strip posted on the truck can also play the role of marker light, if there is a lamp failure, the reflective strip can also play a role in ensuring driving safety. 2019