Why is there no data to query the itinerary code?

<> "There may be several reasons:1The itinerary code was entered incorrectly.

Please make sure that the itinerary code entered is correct to avoid missing the data due to the wrong input. 2.The itinerary code has not been generated.

If you are a passenger on a recently completed domestic flight, it may take a while for the airline's system to find the itinerary code due to the waiting airport system. 3.The time of inquiry is too long and the flight departure time is too long.

Usually, airlines only keep the ticket information for a certain period of time, and if the query time is too long before the flight departure, the data may not be queried. 4.The ticket information you searched for has been deleted.

The data in the airline's system is cleaned regularly, and if the queried ticket information has been cleared, the data cannot be queried. If none of the above is the reason, please try to use other methods to inquire, such as ** or official website customer service.

1. It may be that there is no data connection with the base station, and it takes more than three minutes to dial ** with the mobile phone.

2. Every four hours or so, dial ** again for more than three minutes, two calls** before eight o'clock in the evening, and the next day the itinerary code will have data.

The itinerary code is based on everyone's mobile phone roaming records to record the location, and the rule that a card can have roaming records in the field is that within one day, in the same place, call more than twice**, with an interval of more than four hours! If your mobile phone is a dual SIM card, the two cards are not in the same location, for example, one card is a hometown card, one is a card in a different place, people are in a different place, and the hometown card is not used, so there may be a problem that the travel code cannot be found in the trip data. It is recommended that if you find that the itinerary card can't come out, the first time to see if the distance is more than 4 hours from 20 o'clock, if it is exceeded, immediately call ** to others (anyone can do it, just need to roam records), it is best to take more than 3 minutes, if not exceeded, try the next day.

It is best to have 5 ** a day, with an interval of 1 hour or 1 and a half hours, and the interval between the first pass ** and the last pass should be more than 4 hours before 20 o'clock on the same day.

New users have only used the itinerary card for less than 14 days. The travel card mainly relies on the information base station to record the travel track, and the three major operating users of the mobile phone card can use it.

There is an error in the itinerary card data. The premise of trip data recording is that these signaling and CDR data are generated by the user in the process of using the mobile phone.

In this case, you can try to make a few more calls**, or turn off the Wi-Fi connection to use 4G data, and you can do it the next day without problems.

The itinerary card service is to ensure continuous communication and achieve coverage without blind spots, and the signals of the two bases at the junction of administrative divisions may cross coverage, resulting in deviation of the results and may not be able to find data.

If the technology is not mature, don't come up with this thing to trick people, or improve it. People are staring at this card, and you can't find it, and you can't solve it after trying in various ways, so what should people do?

3.Go in, click on the itinerary card, enter the epidemic prevention code, and click on the communication big data itinerary card;

4.After popping up, click on the query, click to enter, the query button will pop up, click query;

5.After the query is completed, you can see the route and then pop up the communication big data itinerary card, and you can see your own itinerary.

Every four hours, make another call to relatives and friends** (more than three minutes); Note: The two links** should be guaranteed to be completed before 20:00 on the same day.

The next day, your communication big data itinerary card will be normal.

If you find that the itinerary card can't come out, it is recommended to check whether the distance from 20 o'clock is more than 4 hours, if it is exceeded, immediately call ** to others (anyone can, just roaming records), preferably more than 3 minutes, if not exceeded, try again the next day. 5 ** for 1 day is best, with an interval of 1 hour or 1 and a half hours, with the first ** and the last ** separated by more than 4 hours until 20 o'clock on the same day.

The big data card is based on the user's mobile phone signaling data to provide location query services, and Bluetooth location information is not much to do with the essence of the Bluetooth location information, that is, the mobile phone operator has a signal where you can query the place you have been, but in some areas, if the mobile phone signal value is weak or there is no signal, there will be deviations, and there may be places that have been not displayed in this situation.

Notes:

In order to make it more convenient for users to inquire and prove the health status of epidemic prevention, the national integrated government service platform has now incorporated the communication big data itinerary card information into the epidemic prevention health information code service.

In the 14-day domestic and overseas itinerary declaration and query of the epidemic prevention health information code, after the user declares the domestic cities and overseas countries (regions) he has visited in the past 14 days, the system will verify the declaration information and the communication big data itinerary card data to avoid concealment and false reporting.

The above content reference: People's Daily Online-Ministry of Industry and Information Technology responds to the "Epidemic Prevention and Control Itinerary Inquiry" service.

The travel code cannot find the travel track may be due to the following reasons:

1. The effective data of the user's resident call in the past 14 days is insufficient, and the user needs to record the call data in a city in a single day in the past 14 days at the earliest and the latest interval of more than 4 hours to display the itinerary.

2. Newly opened ** card. Users of any of the three operators, China Telecom, China Mobile, and China Unicom, can use the travel card service. New account users can only use the service after 14 days.

3. There is an error in the data of the itinerary card.

Because when the operator determines the conditions of the residency trip, in the last 14 days, the call data in a city in a single day is mainly based on dialing, and the traffic will not be used as the basis for judgment, and all the travel data of the communication big data itinerary card are pushed by the operator's specific province as a unit, and there may be a certain delay, but it will basically be pushed from 10 am to 4 pm.

Go back to your phone's desktop and tap Mobile network. After that, tap Mobile Data. Switch the network, sometimes the network is not good, and the query will fail.

Go to the itinerary card page again and click Login. The mobile phone number pops up on the page, click Allow. After that, click on the epidemic prevention itinerary card, and the detailed steps:

1. As shown in the figure above, the query of the epidemic prevention itinerary card failed.

2. Return to the desktop of your phone and click Mobile Network.

3. After that, tap Mobile Data.

4. Switch the network, sometimes the network is not good, and the query will fail.

5. Enter the itinerary card page again and click Login.

6. The mobile phone number pops up on the page, click Allow.

7. After that, click on the epidemic prevention itinerary card.

8. Enter the mobile phone number of another service provider for the mobile phone number, for example, if you can't query with the mobile phone, you can change the number of the telecom to query, and then enter the verification received by the mobile phone number, and click to query.

9. After clicking on the query, you can query the itinerary code.

Hello, there are several reasons for the failure of the general itinerary card query: 1. The communication big data itinerary card service uses base station data, in order to ensure the continuity of communication, in order to achieve no blind spot coverage, the signals of the two base stations at the junction of administrative divisions may overlap, resulting in deviations in the results. 2. Also, if you stay in a city for less than 4 hours, it will not be recorded.

3. The overseas itinerary record requires you to open the international roaming service during your trip abroad, and the deviation of the result is particularly serious, so you should contact customer service in time. Note: When using the itinerary card, data deviations may occur, and when using it elsewhere, be sure to pay attention to the risks of use.

Because there is a certain delay in network data, it will be automatically updated in the future.

Hope it helps

Do you have any other questions? If you are still satisfied, can you expect a small review, thank you very much! May you be happy every day!!

Questions. I've been here for days.

I've been here for days.

I haven't been able to find out.

It's been more than half a month.

Hello, your situation is special, you can try it with these methods first:

Solution: 1. First of all, in the morning or morning, dial the first **, you can call any user, and control the call duration to be more than 3 minutes; 2. Then after 4 hours (the condition for staying in the city is to stay for more than 4 hours), dial the second **, which is also more than 3 minutes and must be completed before 8 pm; 3. If it is a user who is not ported to the network within 14 days, and cannot find the itinerary, it may be because the effective data of the past 14 days is insufficient. 3. If it is a roaming user outside the province, especially in Fujian and Shandong, it is recommended to dial 5 ** and dial at 5 different time points, such as points, and you can also query the itinerary the next day; 4. If the pass record has met the conditions, but it is still displayed, you can take a screenshot of the specific call record, which needs to be accurate to the hour, and then send it to the mailbox, and the official will file a complaint with the operator and deal with it.

The "itinerary card" analyzes the signaling data and CDR data of the mobile phone, so the premise of having the itinerary data is that the user generates these signaling and CDR data in the process of using the mobile phone. In this case, you can try to make a few more calls**, or turn off the Wi-Fi connection to use 4G data, and you will be able to check the data the next day without problems.

What should I do if I can't find the itinerary on the itinerary card?

1. Roaming in different places, you need to make five calls a day**, more than 1 minute, and then each pass must be separated by more than 20 minutes. Mine was back to normal at about 9 o'clock the next day.

2. Just call someone else**, remember to connect, there must be two calls within 14 days with an interval of more than 4 hours**, the latest call should not exceed 8 o'clock in the evening, call the day before, and you can query the information at about 12 noon the next day.

How to query the communication big data itinerary card:

3. If you want to query the local number, check Agree here and click "Query".

4. After clicking "Query", the query result will appear, showing the city that the owner has visited in the last 14 days.

5. If there is no key epidemic area in the place you visit, then the arrow will show green.

There may be two reasons why the information cannot be found on the itinerary card, one is that the server is more congested, and there are more people who inquire about it, so you can check it later. The first reason may be that the network environment near you is not good, you can move it or restart the machine, and change it to a higher open location to query.

Hello, the travel data queried by the communication big data travel card search are all from the operator (mobile, telecom, Unicom, etc.), the operator will judge the call data in a city within 14 days and a single day, mainly to dial **, so if the user rarely dials **, answers**, so the operator does not query the user data in the background, and cannot obtain the 14-day trip.

Solution: Within the same period, use the mobile phone ** card to call any contact, the time is more than 3 minutes, the interval between the two uses is more than 4 hours, and it is completed before 8 o'clock in the evening. 

Hello Answer! The location query service data provided by the itinerary card** is "mobile phone signaling data", which is obtained from the location of the base station where the user's mobile phone is located. 2 **s need to be played on the same day, more than 4 hours apart, and both before 8 p.m.

Conditions for operators to determine the dwelling itinerary: In the past 14 days, the earliest and latest recording time of call data in a city (mainly calls, traffic will not be used as the basis for judgment) and other records are more than 4 hours at the earliest, and the itinerary can be displayed. Thank you.

Hello, here are mine:

It is convenient for managers to check. When the user's itinerary in the past 14 days does not include cities with medium and high-risk areas, the asterisk will disappear by itself. In the case of "The itinerary cannot be found on the itinerary card", "Communication itinerary card.

The itinerary card analyzes the mobile phone signaling and call list data, so the premise of having travel data is that the user generates these data in the process of using the mobile phone, and when you encounter the problem of not finding the itinerary, you can try to make a few more calls**, or turn off the Wi-Fi connection to use the following 4G traffic, and the data can usually be found the next day.

For the situation that "the itinerary card cannot find the itinerary", the "communication itinerary card" analyzes the mobile phone signaling and call list data, so the former Hongsui with the itinerary data is the user in the process of making Hui Juesui use the mobile phone to generate these data, encounter the problem of not finding the itinerary, you can try to make a few more calls**, or turn off the Wi-Fi connection to use the following 4G traffic, usually the next day can find the data.

Report, then there will be a report, if you don't do it, you can't find it.

The itinerary card analyzes the mobile phone signaling and call list data, and when encountering the problem of not being able to find the itinerary, the user can try to make a few more calls**, or turn off the Wi-Fi connection to use 4G traffic, and the data can usually be found the next day.

What does the "*" on the itinerary cassette mean? Will it affect travel? When querying the itinerary card, you may also encounter some other problems: such as why you can't find the itinerary, why the itinerary information is not updated, etc. Here will be answered one by one for you.