HOW DO I MAKE IT IMPOSSIBLE FOR OTHERS TO FIND MY WIFI SIGNAL?

If you want others to not be able to search for your wifi signal, in this advanced setting of the wifi signal, hide the wifi signal, that is, it belongs to a stealth state.

How to set the SSID hiding method of the wireless network:

There is a write), connected to a wifi network.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the wireless settings interface and check Hide SSID or Turn off Broadcast (SSID).

You can set up your wifi settings to set up a computer for administrative users. Then hide your signals. That way, others won't be able to connect, or see who is connected to your wifi and block them all, so that they can't use your wifi to connect in time.

Open the computer browser, enter the management address of the router in the address bar, and enter the management password to enter the interface. Wireless settings, remove the tick in front of turning on wireless broadcasting, click Save to complete the setting, and the signal will be hidden.

For older versions of routers, log in to the router management interface, basic settings, remove the check box in front of enabling SSID broadcasting, and save and restart the router.

Also known as mobile hotspot in Chinese, it is the trademark of the Wi-Fi Alliance manufacturer as a brand certification of the product, which is a wireless LAN technology created in standards. Due to the close relationship between the two systems, Wi-Fi is often used as a synonym for standards. Wi-Fi is often written as WiFi or WiFi, but they are not recognized by the Wi-Fi Alliance.

The wifi frequency bands supported by the phone and router do not match.

Wi-Fi (pronunciation: wafa, French pronunciation: wifi), also known as "mobile hotspot" in Chinese, is a trademark of the Wi-Fi Alliance manufacturer as a brand certification for products, is a standard wireless LAN technology.

Due to the close relationship between the two systems, Wi-Fi is often used as a synonym for IEEE standards. Wi-Fi is often written as WiFi or WiFi, but they are not recognized by the Wi-Fi Alliance.

Not every product that matches the IEEE applies for Wi-Fi Alliance certification, and a product that lacks Wi-Fi certification does not necessarily mean that it is not compatible with Wi-Fi devices.

Wireless network wireless Internet access is more commonly used in big cities, although the wireless communication quality transmitted by Wi-Fi technology is not very good, the data security performance is worse than Bluetooth, and the transmission quality needs to be improved, but the transmission speed is very fast, can reach 54Mbps, in line with the needs of personal and social informatization.

The main advantage of Wi-Fi is that it does not require wiring, and it can not be limited by wiring conditions, so it is very suitable for the needs of mobile office users, and because the transmitted signal power is less than 100MW, which is lower than the transmit power of mobile phones, Wi-Fi Internet access is relatively safest and healthiest.

However, the Wi-Fi signal is also provided by the wired network, such as ADSL at home, community broadband, etc., as long as you connect a wireless router, you can convert the wired signal into a Wi-Fi signal. Many cities in developed countries abroad are covered with Wi-Fi signals provided by ** or large companies for residents to use, and there are also many places in China that implement the "wireless city" project to promote this technology. In pilot cities where 4G licenses have not been issued, many places use 4G to Wi-Fi for citizens to try out.

1. Make sure that the mobile phone has a wifi function, make sure that there is wifi coverage around (it is best to say within 50 meters and 100 meters, the theoretical value is 305 meters in the open area, 76 meters to 122 meters in the closed area), turn on the wifi switch of the mobile phone (settings - wireless and network - wlan), search to connect it.

2. In ordinary use, you can establish a one-key switch on the desktop (click and hold the screen pop-up window to select the plug-in, there is a wifi one-key switch, etc.).

Hide or leave the broadcast unpublished.

1. There is a sticker at the bottom of the router (or other location), and you can see the login address of the router in the sticker, as shown in the following figure.

2. Then enter the login address of the router in the browser of the computer mobile phone (the first step is to check it), open the login interface - > and then enter the login password (administrator password), you can enter the settings page of the router.

3. In the settings page of the router, find and open the Network Cable Settings (Wi-Fi Settings) option, and then you can set to hide the WiFi signal.

<>4. In the new version of TP-Link, underwater, and Swift wireless routers, under the Wireless Settings option, turn off: Turn on wireless broadcasting, as shown in the figure below.

This may be due to differences in your WiFi settings. First of all, you can check whether your wifi has been turned on under the purity of a thing; Secondly, you have to check whether the wifi signal is normal; Finally, look at whether the wifi is encrypted correctly. If the above items are normal, but others can search your wifi but you can't, then it is likely that you are using an incompatible device.

In short, the desired result can be obtained by carefully reviewing and adjusting the relevant parameters.

This issue is most likely due to your incorrect wifi settings. First of all, please check whether your wifi password is correct; If it's incorrect, try re-entering. Secondly, you should also pay attention to whether you have opened the wifi hidden function of the data server; If you turn on the hidden feature, others won't be able to scan your WiFi signal.

Finally, it is recommended to go to the official customer service center for help so that you can find out the problem and fix it as soon as possible.

WiFi has become an indispensable part of our lives, if suddenly you encounter the wifi at home can not be found, can not access the Internet, will you feel very bored?

Let me teach you how to solve the problem of not being able to find the wifi name at your home.

First of all, when others can search, but, only you can't find the wifi name, we can be sure that there is no problem with wifi, if it is a mobile phone, then you may need to restart your mobile phone wifi function, if it doesn't work many times, then let's try to restart the router, if it doesn't work, then we need to enter the wireless router to modify the wifi name, how to enter the router I won't explain in detail, Because I wrote about how to set and change passwords for routers in my previous article.

Buy jadeite first to see here, first-hand supply, raw stone cutting, manufacturers direct supply.

Ad. **。

After entering the router management interface, find the wireless settings, and then the basic settings, you can set the SSID on the right, and enter a different SSID number to it. As shown below:

If it's a laptop, then you can also solve it by reinstalling the system, which is the most troublesome, and the next step.

Secondly, if everyone can't search for the WIF name at home, then it is most likely that the router is dead or not plugged in, and then check whether the wireless function and broadcast function in the router are turned off. As shown in the figure below:

Here's how to make it impossible for others to find your home's wifi:

The first step is to log in to the router interface.

Step 2: Enter your login password and click Login.

Step 3: Click on System Administration.

Step 4: Enable wireless signal name masking.

Step 5: Scroll to the bottom right corner of the webpage and click OK.

Step 6: Restart the router to take effect.

Note: The interface of the router will be more or less different, but the functions are similar.

There are two main cases:

1. The vast majority of the first situation is caused by the setting of the router. Due to the confidentiality of the router and the prevention of network rubbing, there will be MAC address filtering settings.

Follow these steps:

First click on the IE browser, enter it in, the initial password is generally admin, and enter the wireless network settings interface.

After that, enter the wireless network settings interface, in the cover Kai here we can cancel the SSID broadcast function and then save the settings and exit.

With the SSID broadcast turned off, we need to reconnect to the network with a computer or other electronic device at hand to see if a wireless network is available.

Next, change the advanced settings.

Configuring the IoT-Evoke of the wireless network, the network and sharing center - connect or network - manually connect to the wireless network on it.