It is said that the channel steel layer cannot be bought, and the houses on the few floors belong to

Now I will combine some of my own views and experiences to talk about the landlord's problem; The construction site I am on now is a high-rise community on the 18th and 20th floors, but we have a channel steel layer.

All of them are in the 4th, 10th, 16th and 3rd channel steel layers. , this is the cantilevered frame of the outer epitaxy.

This is a protective effect on the construction. The channel steel needs to stretch out from the building as the bottom support of these cantilever frames, so that the scaffold pipe is erected on the channel steel to complete the erection of the external cantilever frame.

<>But the developer, as well as the sales office, will certainly not tell you about the shortcomings of their houseAll of them let people know the more prominent shortcomings, and these houses cannot be sold.

It is the construction of the main structure of the construction project, and the section steel is adopted.

Cantilever outer frame construction, generally using channel steel, I-beam.

or other tool-type outer frame cantilevered outer frame construction. Through the cantilever section steel of the floor, a double-row outer scaffolding around the floor circumference is erected.

Ancillary construction. I believe everyone has seen that when repairing the house, there will be a layer of steel pipe frame on the outside, but this outer frame does not mean that it is built from the first floor to the top floor, but almost every 6 or 7 floors, because it will be removed directly after the repair below.

Of course, almost all of the channel steel is counted from the standard floor, which is what everyone calls the first floor, and the underground garage is not counted in it. Regarding construction, the standards and rules for each type of work are clearly divided, and the installation and dismantling of channel steel belongs to the scope of work of the erector. Generally, I-beams or other tool-type outer frames are used for cantilevered outer frame construction.

Through the cantilever section steel of the floor, and then the double row of external scaffolding around the floor is erected to assist the construction. Cantilevered scaffolding.

It is a simple facility used in construction, which is divided into two types: one lift per floor and multiple overhangs.

If the floor spacing.

If it is closer, there will be a lack of lighting on the sixth floor, depending on the distance of the building and the surrounding environment. If there is no problem with lighting, you also need to look at whether the house type is reasonable, ventilation and other factors to consider comprehensively. Generally, the first channel steel layer is the first three-layer layer, and then basically one of the six layers, but this is not absolute, depending on the construction plan of the construction unit.

How to do it.

The 3rd, 10th, and 17th floors all belong to the channel steel layer, and the reason for not buying it is that once it encounters rain and snow, the water flowing down from the channel steel layer will flow into the house.

Generally, 3 floors or 9 floors and 7 floors, and 11 floors are likely to belong to channel steel houses, which are generally not very stable and not easy to live in.

Generally, there will be a channel steel layer every 7 floors, about 3 floors, 10 floors, 17 floors, and 24 floors, all of which belong to the channel steel layer.

Generally speaking, the channel steel floor of a high-rise building is the 7th or 8th floor, so many people do not buy a house with this number of floors.

The foundation of a channel steel house is usually channel steel, which is mainly used in building structures, curtain wall engineering, mechanical equipment and vehicle manufacturing. The canal dam is a long steel belt with a length of groove. In the houses built on the canal, when people walk on them, there is some kind of commotion sound.

The smaller the size of the channel, the louder the stirring sound. The higher the gauge of the channel, the quieter the stirring sound. Many people will pay attention to the position of the channel steel layer, because in the past people said that the channel steel layer is seriously leaking, and this kind of floor should be avoided.

In fact, with the development of these years, many people will choose this position because it is affordable.

<>As the name suggests, the steel layer of the canal is made of the steel of the canal. Due to its special shape and load-bearing capacity, channel steel is also widely used in support structures. Why can't you buy a canal tip when you buy a house?

What are the disadvantages of the channel steel layer? Floors in the English Channel are a technological medium that should be created when building high-rise residential buildings, but most home buyers don't understand it deeply. It is not recommended that you buy a house on the ground floor.

The first floor house is close to the community corridor and corridor, which is affected by the surrounding environment, and the surrounding environment air pollution is also very serious.

The houses are built with different materials. For example, the most common buildings nowadays are towers or slab buildings. I don't know if you know about this building from the end of the canal.

Why not demolish Minghuai and buy a house to buy the steel structure layer of the canal? There are also some deficiencies and deficiencies. The steel layer of the channel is not that you don't use rebar on the floor, but that you place the channel at intervals next to the floor.

The canal extends to a certain length above ground and serves as the foundation for scaffolding construction.

Especially when it will be particularly hot, buyers will have to pay a lot more for air conditioning. In addition, if you live on the top floor, it is definitely impossible to rely on the stairs to go up and down the stairs, and the residents on the top floor rely heavily on the elevator. The reason for not buying a channel steel layer is very simple, because people will make a lot of noise when they walk around on the traveler, and there will be a certain amount of shaking, which will have a lot of impact on life, and if the glyphosate is not handled well.

1.If there is a water leakage in the channel layer, the next layer of the channel steel layer will be affected. For example, if the channel steel layer is on the 22nd floor, then the residents on the 21st floor will also be affected, and the next-door neighbors may also be affected, which is likely to lead to large-scale water leakage, which will cause damage to the interior decoration.

2.The channel steel layer does have a certain impact on the house. In traditional construction, when people walk on it, there will be a certain shaking sound like a group, and there may be corrosion if the channel steel layer is not treated well.

However, now the smelting of channel steel has added a special slag technique, so the owners who buy the upper and lower layers of the channel steel layer do not have to worry too much about the slag, and the decoration can be done in advance.

Channel steel layer of the building.

It is a floor made of steel-type material, which is used as a load-bearing layer of the building, and is also called the basic channel steel. Because the channel steel layer sometimes has a sound, many people will avoid this floor when choosing.

Buying a house is basically off-plan.

When selling real estate, you can directly ask the sales Gu channel steel layer for the specific number of layers. If you buy a capped house, you can go to the house to look at it, the channel steel layer is different from other floors, there will be a circle of holes inside, and the building is more prominent outside, but not all of them are like this, and you still have to ask the sales staff of the building.

Channel layers appear on the 4th, 10th, 16th, 22nd, 28th, and so on

Channel layers occur every 6 layers. The root cause of this type of channel layer is that we are erecting scaffolding.

When the cantilever is done from the 4th floor.

Then, according to the requirements of the channel steel layer erection specification, the height of each erection is not allowed to exceed 20m, so the routine is in accordance with 6 layers. Because the floor height of each floor is basically 3m, and the 6th floor is 18m, so it just happens to meet the specifications. Then from the 4th layer, the channel steel layer appears every 6th layer.

This is also a common practice for many high-level executives.

Summary. Hello dear :

The channel steel layer is upstairs, generally refers to a single-storey building, not every floor has Ha, there is a layer in about 20 meters. Generally, there are channels on the 7th, 13th and 18th floors.

Whether the channel steel layer has channel steel on one building or a set of two houses with channel steel.

I am the main question and answer "Xiao Yue'er Wang" Hello, I am happy to serve you, the question has been received, is typing the answer, please be patient and wait for the next three minutes will give you an answer! This reply is only for the reference of this question, and does not make correct conclusions).

Dear, hello: the channel steel layer is upstairs, generally refers to a single-storey building, not every floor has Ha, there is a layer of about 20 meters. Generally, there are channels on the 7th, 13th and 18th floors. Cultivating nuclear macros.

You refer to it.

Do all the houses on the 7th floor have channel steel?

Dear, high-rise buildings are basically yo.

To use an analogy, there are four houses on seven floors, and all four houses have bad steel.

Dear, yes, there are channel steel all around the flat 7th floor.

If you're worried, focus on external wall insulation and waterproofing.

If the waterproofing treatment of the channel steel layer is not good, water seepage may occur. However, the current technology is very high, and the problem is not serious, but Gao Yin cannot guarantee 100%. In addition, the channel steel layer of the upper and lower floors may be interfered with by the noisy bridge core, and the house may also leave traces after delivery.

Channel steel layer flooring.

The houses I buy now are basically high-rise or multi-storey. High-rise residential buildings will basically have channel steel layers. If it is a ten-story house, it basically belongs to the channel steel floor of seven or eight floors.

If it is a house with more than 30 floors, in addition to more than a dozen floors, the other 20 floors will have channel steel layers. In particular, the channel steel floor is several floors, and you can directly consult the sales staff.