How to clean water stains on the handwashing tray and how to clean the stains on the washbasin

Water stains in wash basins generally include limescale and rust stains. If it's a simple cleaning, just moisten it with a rag and clean it up. If you want to clean it up more cleanly, you can use laundry detergent to remove the stain, but don't wipe the basin with a rubbing cloth that is very rubbing, as it will lose its luster.

Cleaning a glass basin is a bit of a hassle, so try to wipe it clean with a rag every time you use it, as it is easy to leave dirt and handprints. In addition, the thermal conductivity of porcelain and glass is very small, and it is easy to break when exposed to heat or too cold, and when the temperature is very low in winter, it is necessary to pay more attention to the hot water that should not be used to rinse the wash basin. At the same time, it should be noted that when cleaning the undercounter basin, it is necessary to clean the dead corner part of the joint between the countertop and the basin.

To clean the water stains in the wash basin, pour the disinfectant into the wash basin first, block the wash basin, let the disinfectant soak for a period of time, and wipe it continuously with a stiff brush after half an hour, remember to wear gloves, so that the scale can be removed. Boil a pot of grapefruit peel boiling water, pour it in, soak it for a while, and clean it again, the wash basin is clean.

We can wash the wash basin with baking soda and room and board. Put the baking soda into the watering can, then pour in some vinegar, shake evenly, spray the scale, wipe with a steel wool ball while spraying, and the wash basin will be as clean as new in a minute or two.

Water stains on the wash basin can be wiped with some tile cleaner, so that the water stains can be removed.

Answer: Wash with toothpaste. Cleaning with toothpaste is a more energy-saving and environmentally friendly method, we can apply the toothpaste to the place with scale, let it stand for a while, and gently wipe it off with a rag. The same effect can be achieved with table salt.

Both of these materials are relatively simple, convenient and environmentally friendly, and we can choose to use them.

Wash with vinegar. Vinegar is a very good way to remove limescale, and it is easy and convenient. Pour the vinegar over the limescale area and soak it for a while.

White vinegar hand sanitizer and disinfectant can be used with grapefruit peel water, baking soda and vinegar to remove stubborn limescale from the basin.

1. White vinegar hand sanitizer

Fill the watering can with some white vinegar, then squeeze in some hand sanitizer, shake it vigorously, and then spray the scale in the sink, spray it a few more times, and remove it easily with a cloth.

2. Disinfectant with grapefruit peel water

Pour the disinfectant into the wash basin first, block the wash basin, let the disinfectant soak for a while, wipe it with a brush for half an hour, and remember to wear gloves so that the scale can be removed. Boil a pot of grapefruit peel and boil water, pour it in, soak it for a while, and wash it again.

3. Baking soda and vinegar

Put the baking soda in the watering can, then pour in some vinegar, shake evenly, spray at the scale, wipe as you spray, and the sink will be as clean as new in a minute or two.

How to maintain the wash basin

1. When cleaning regularly, you can use a soap-soaked nylon brush to brush in a circular trajectory, and then rinse thoroughly. Regular cleaning will help prevent water stains from hardening. If you want to get rid of stubborn stains, you can try non-abrasive detergents such as dish soap, bleach, etc.

2. The blockage of the washbasin and the poor drainage are usually based on the hair blocking the drainage hole, and the solution can be to use a chopstick to push the foreign body out of the drainage hole of the nozzle at the drain of the washbasin. If a foreign object gets stuck in the gap between the drain hole and the sewer pipe, you can turn the nozzle of the drain pipe and unclog it with chopsticks on top of the wash basin at the same time.

3. The leakage of the washbasin is due to the quality of the hose or corner raft connecting the interface between the washbasin and the water pipe; Second, because the raw material belt at the interface between the hose and the water pipe is not wrapped enough or unevenly, resulting in water leakage, the treatment method is to re-wrap the treatment interface with the raw material belt, or replace the angle raft and hose.

We use the washbasin or washbasin almost every day in our daily life, but after using it for a long time, we will find that the area around our washbasin becomes very dirty, resulting in a large circle of black stains. I bought the same washbasin with my roommate when I was in college, but after using it for a few months, I found that my roommate's washbasin was very clean, and my own became very dirty.

Many people don't know how to remove stains from wash basins. Don't be in a hurry, everyone. Let's tell you how to remove it.

How do you remove stains from wash basins?

Step 1:Let's start by pouring some vinegar on the stained area of the wash basin and sprinkling some baking soda on it and soaking it for a while.

Step 2:After soaking for about half an hour, we can use our usual discarded toothbrush to repeatedly scrub the stained area.

Step 3:After brushing, rinse with water, sprinkle some baking soda on the yellow dirt that has not been brushed off, and then scrub vigorously with a toothbrush, do not sprinkle baking soda on a large area, where there are stains sprinkled in which place, while scrubbing, sprinkle some baking soda, repeat the operation, and finally rinse with water.

The above is what I shared with you today, everyone must get started, don't be lazy, and do a good job of hygiene at home.

1.Do not soak before washing dishes. Richard Connell, program manager for Energy Star at the U.S. Department of Energy, pointed out that it was thought that bubbles before washing dishes would make them cleaner.

Actually, it's not. In this way, it can neither remove the oil stain nor sterilize, but waste the water in vain. It is recommended to wipe the dishes with a damp cloth before scrubbing.

2.Dip a damp cloth in baking soda. Tests have proven that with a damp cloth dipped in baking soda, you can wipe the dishes clean in 20 seconds. If there is grease on the plate, you may want to use a damp dish cloth dipped in baking soda and wipe the surface of the dish vigorously, then you can rinse it off as quickly as possible with very little water.

3.Wipe the plate first with cucumber and carrot heads. It is easier to wipe the plate with fresh cucumber heads and carrot heads first to wipe off some of the grease stains, and then brush them with water. This will save you 18 kg of water.

4.Rinse the plate under running water. Many people rinse their dishes in basins full of water to save water.

In fact, it is difficult to rinse it off in one go with non-flowing water, and it needs to be repeated many times. Rinsing the dish under running water once or twice will wash off the detergent, so that the total amount of water used is less than a full basin.

How to wash dishes, after eating, the plate is oily, first wipe off the oil with paper, and then use a dishcloth to scrub with hot water.

It's the same as washing at home, and the newcomer used to observe the senior's way of doing things while doing things. The work is easy, be mentally prepared, and wash the dishes is simple enough. Action is the only way to solve problems. Come on!

Is this a lot of thinking?