How to deal with water seepage from bay windows and balconies, blistering and falling off walls?

Summers in the south are rainy. In summer, floating windows leak, causing mold on the walls and falling off. This is very disturbing.

It is repaired and leaked every year. My bedroom has a large bay window. When my parents bought the house, they also loved the bay window.

It happened to be my bedroom. It's quiet and the view is great. However, there will be a lot of mold on the windowsill, especially in summer and autumn.

There was a faint musty smell. The main reason is the problem with floating windows. Rainwater will always drift in, causing mold on the walls, with slight bubbles on the walls.

For the sealing material that cracks the shell due to aging, it can be removed first, and the parts can be cleaned until the surface is free of impurities such as oil and dust. Then, a certain percentage of waterproofing sealant is mixed with waterproofing powder to form a waterproof sealant that is used to fill the seam between the glass and the window frame. When mold spots appear on the walls, first remove them with a toothbrush, wipe them with alcohol, and then mix the bleach powder with water.

The ratio of bleaching powder to water is 1:99. Spray the mixed water level bleach powder on the moldy wall.

**Purchase a bottle of wall paint, wall release agent and anti-mold agent, and use them together. Spray the wall release agent on the wall with mold spots. Results can be seen immediately in less than 5 minutes.

Determine the amount of plaque used based on the severity of the plaque. After the mildew spot is completely eliminated, spray the antifungal agent on and near the repaired wall, which can be sprayed on a large area to effectively prevent mildew. Scrape off the puff part, polish the edge of the scraped part smooth, apply the wall paste to the damaged part, brush repeatedly, and after the wall paste is dry, polish it with sandpaper, and wipe off the dust after grinding.

The combination of wall repair paste and paint repair paste has a better effect.

For window sills with serious leakage, waterproofing must be carried out, especially for the top and wall surfaces. Scrape the wall waterproofing putty, then paint the waterproofing paint, and finally insert an elastic sealing material into the gap between the window frames. Many owners don't know much about this knowledge before renovating their house, thinking that the most expensive must be the best, but often not necessarily.

After choosing the quality of the windows, we must also choose the right renovation team to make the new home more perfect.

The first thing to do is to find the leak. After the leakage is treated. It can not be cleaned of the walls that have peeled due to water stains. After the wall is treated, it is enough to apply a new layer of putty.

In this case, the best way is actually to ask someone from the renovation company to deal with it, which requires professional tools to be able to deal with it.

Buy some cement and glue to redecorate, buy some waterproof wallpaper to stick on the ground, and renovate balconies and bay windows.

The premise is that the water leakage problem of the bedroom bay window and window sill should be rectified before the problem of bubble bursting of latex paint can be solved. If it is due to the leakage caused by the glue of the window frame, the old glue can be cleaned up, and then add the weatherproof glue again to seal it, and remember that the glue should be played a little wider. If it is caused by leakage in the façade of the wall, the exterior wall can be sprayed with a fully transparent waterproof penetrant.

I let the infiltrate penetrate into the inner structure of the wall and establish a high-density floor waterproofing to prevent water from penetrating. There are some young construction management personnel who are greedy for beauty and generosity at that time, do not understand and do not care what the effect will be in the future, do not listen to the advice of others, think of themselves, pretentious, a bottle of dissatisfaction, half a can of swaying, to lead to many conclusions that can not be sorted out later. As far as the seepage of precipitation around the window is concerned, it is impossible to leak around the window if the sealant is used first and then sprayed or sprayed with Jinding paint.

The leakage of the upper end of the window should be the problem of water seepage on the outer wall of the window.

The surface layer of the window wall is cracked or the backwater edge is ineffective. The backwater edge is the concave groove of the wall at the upper end of the window, or the retaining edge, in order to prevent precipitation from flowing into the window along the wall, the upper end of the window wall is generally set. The gap between the bedroom bay window and the balcony wall is not tightly sealed, resulting in precipitation leaking into the home according to the gap when it rains, and the wall putty powder grows moldy and falls down after the moisture returns.

If it is the original window structure of the engineering building, if you have not touched it, you must notify the property for maintenance.

If it is your own new window, it is possible that the sealant of the internal structure is not closely related to the foam glue, and you must re-apply it. You can first remove these rubber seals that have cracked due to aging, clean these locations until there are no residues such as oil stains and dust on the surface, and then add a certain ratio of waterproof sealant with waterproof powder to synthesize moisture-proof polyurethane coatings, which are used to fill laminated glass and window joints.

The treatment method of blistering and falling of the wall caused by water seepage of bay windows and balconies should first be treated before the blistering and falling of interior wall paints can be dealt with.

If it is because the glue of the window frame is not good and the water seepage is caused by it, you can clean up the old glue, and then re-apply the structural glue to seal, remember that the glue should be made wider. If it is caused by water seepage on the façade of the wall, the exterior wall can be sprayed with a transparent waterproof penetrant to let the penetrant penetrate into the wall to form a dense waterproof layer to block the penetration of water.

After the management of the exterior wall, it is time to talk about how to deal with the blistering and falling problem of the interior wall, remove the stucco layer of the blistering and bulging part, brush the anti-alkali agent, and scrape the putty for leveling after drying.

Summary: Like this, the wall paint layer caused by water seepage is bulging and falling off, and the problem of water seepage should be completely solved before the interior wall paint that drums off can be treated, so as to treat both the symptoms and the root causes.

1. If you want to make the bay window and balcony not seepage in the future, you can naturally solve these two problems after dealing with them, that is, repair the bay window frame and the exterior wall to re-do waterproofing or increase the waterproof function. Solve the problem of no further water seepage, and then repaint the wall that has been blistered. Let's talk about the problem of water seepage in the bay window first.

2. If it is determined that there is a problem with the leakage and sealing of the window frame of the bay window, then the original sealing material needs to be peeled off first, and then the gaps in these window frames should be cleaned up. Then buy waterproof powder and waterproof sealant again, blend them according to the instructions, and reseal the bay window, so that rainwater will no longer seep into the walls of the house through these cracks.

If after the decoration is completed, it is found that the balcony and bay window are leaking, then it means that the sealing strip of the window is not done well, and the part of the window needs to be redecorated.

How should bay windows and balconies seep water, and the walls blister and fall? Leaking bay windows have long been a major concern for residents of high-rise buildings, especially during the rainy season, when the inner walls and floors of bay windows are often damaged by water leaks. Therefore, it is a particularly important thing to do a good job of window leakage, but many families have not paid attention to it, today we will talk to you about what kind of waterproof glue is used for window leakage, and whether the interior of the window needs to be waterproofed.

Friends who have been in contact with home decoration know that the commonly used method of filling the leakage of the bay window is to use waterproof glue, so what kind of waterproof glue is used to fill the leakage of the bay window?

<> is actually a good problem, you just need to choose the corresponding waterproof glue according to the actual cause of your home water leakage. For example, since there are gaps that cause leakage during the installation of floating windows, it is correct to choose a waterproof adhesive with strong sealing. Both outward and inward bay windows need to be waterproofed, but there are still many families who don't pay attention to the waterproofing of bay windows.

You know, the bay window is to withstand the sun and rain for a long time, waterproofing is to reduce a series of troubles caused by the leakage of the bay window, such as water dripping powder on the wall, blisters and arching of the floor, these maintenance items have to deal with at least 1,800 children, with this money for repairs, it is best to use the bay window waterproofing.

When looking for a window sill leakage repair company, we must find a company with high-altitude construction qualifications, because the repair of window sill leakage is a project involving high-altitude construction, and ordinary maintenance personnel can't do it. The above is about what kind of waterproofing glue is good for the leakage of bay windows, whether inner bay windows need to be waterproofed, and so on. If you have other concerns about the maintenance and renovation of your house, you can send me a personal letter and a message.

The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

The treatment method of wall blistering and falling caused by water seepage in bay windows and balconies should first manage the problem of water seepage in bay windows and balconies to deal with the problem of blistering and falling of interior wall paint.

For example, in the case of water seepage in the bay window, the first thing to check is how the water leaks in. If it is due to poor glue on the window frame that causes water seepage, we can clean up the old glue, and then re-seal the structural glue, remembering that the glue should be wide. If the outer façade of the wall is caused by water seepage, the exterior wall can be resprayed with transparent waterproof slurry to make the slurry penetrate into the wall to form a dense waterproof layer to prevent water infiltration.

To deal with the problem of falling bubbles in the exterior wall, clean the paint layer of the bubbling tube, brush the alkali resistance agent again, and scrape the putty in dry batches.

The wall seeps water not only from the bay window balcony, but also from the exterior wall modeling, other windows, and even the holes of fixed scaffolding and various exterior wall supports, all of which are hidden dangers of water seepage in the exterior wall.

Note: Try to close doors and windows as much as possible and keep a cool and dry place. Remember not to get out of direct sunlight to make drying faster, and don't use sunlamps for lighting.

This wisdom accelerates the surface to dry faster, while the inside doesn't dry so quickly, and the internal drying progress is inconsistent, which can have a big impact on the quality of the paint! Remember!

Check whether there are particles or other phenomena that are not in place, if there is timely repair and polishing, if not, wait until it is dry to completely solve the problem of peeling, blistering, mildew and yellowing!

Water seepage depends on the original window seepage or your newly installed window seepage. If it is a building with original windows and you have not moved, you need to notify the property for maintenance. If it is your own new window, it may be that the internal sealant and foam glue are not closely related, and you need to play again.

If it is a leak in the window sill structure (leakage at the bottom of the window sill), it is likely that the external wall is leaking rather than the relationship between the windows, and it is also necessary to contact the property for the external wall leakage. Wooden window sills are a relatively early practice, generally used in old houses or European decoration, but wooden windows are easy to deform, especially under the erosion of sun and rain, there will be this problem, so please consider, marble or artificial marble is a good choice.

In this case, it is necessary to find the source of water seepage, then block this source, and then repair the bay window and balcony.

You can replace the waterproof strip again, or you can apply a waterproof treatment to better prevent this from happening.

If the bay window and balcony seep water, and the wall blisters and falls, it is necessary to ask a professional construction team to repair it, and the wall must be dried before it can be constructed again.

In this case, you should find a place where the window ** is not tightly fitted, and then repair this place.

When installing floating windows, it is necessary to do a good job of waterproofing, otherwise it is easy to leak and affect people's lives. Clean the connection between the window frame and the wall first, and then apply waterproof materials to ensure that there is no hollowing between the window frame and the wall to achieve the waterproof effect. The second is to remove the floating window, re-waterproof, and apply glass glue at the connection between the window frame and the wall to prevent water seepage.

When decorating floating windows, safety must be taken into account. The height of the floating window should be lower than the height of the normal window. Only in this way can the design facilitate daylighting, make the window sills more spacious, and at the same time pay attention to strengthening safety protection to avoid accidents.

The dimensions of the bay windows should be measured accurately. If there is a mistake, it will be very troublesome to install, resulting in poor decoration. Therefore, when measuring the size of a bay window, we must be careful to avoid mistakes.

A common cause of leakage on a window sill is: improper construction. During the construction of the main body of the bay window, the reinforced concrete of the side wall and the concrete of the exterior wall are not poured at the same time, resulting in cracks between the bay window and the wall in the later stage, resulting in water seepage; The same situation does not occur when the floating roof of the main building is poured.

The material of the bay window is also very important. When decorating bay windows, we should pay attention to the choice of materials. Currently, there are a variety of fenestration materials available on the market.

Different materials have different ** and different decorative effects. Therefore, we can choose the right window sill decoration material according to individual needs. If the leak is caused by a window on a floating window, it is easier to fix the leak.

If the window is problematic or aging, replace the window that should be replaced, and then plug the perimeter of the window with glue a second time.

Brush the outside of the window with a layer of waterproof material. Professional exterior wall waterproofing material that resists UV rays and rain. Therefore, painting directly at the window joints can also effectively avoid water leakage in the future.

If there is a crack in the main body of the window sill that causes water seepage, the first thing to do is to repair the crack. The method and process of repairing cracks in the exterior wall is the same. First, the cracks around the wall are cleaned, the cracks are expanded, then leveled and filled with waterproof paint, and finally the wall is restored.