How does my tap water have a kind of foam like rinsing detergent?

There are a few possible reasons why your tap water in your home may be foaming like rinsing detergent

1.Aging of water pipes: With the extension of the use time of water pipes, the inner wall of the pipes is prone to scale layers or dirt, which can cause the water to flow poorly, forming bubbles, and thus forming white foam.

2.Gas dissolution in water: Tap water contains gases such as oxygen, nitrogen, etc.

When tap water flows, the gases in the water form bubbles from the surface of the water, forming white foam. This phenomenon is more common when the water is flowing slowly, when there is a change in pressure, or when the water passes through the tap.

3.Chlorine added to tap water: Chlorine added to tap water is a measure to ensure water quality, but too much chlorine will cause white foam in tap water, which may contain higher concentrations of chlorine, which has certain hidden dangers in drinking water safety.

4.Contaminants present in the water: such as grease, detergent residues, soap or dish soap, etc., which can reduce the surface tension of the water, making it easier for the water to form bubbles, and the foam will be more stable and long-lasting.

5.The water source contains high soluble substances such as hardness components (calcium and magnesium), which react with detergents such as soap to produce a lot of foam.

It is recommended that you try to change the water source or replace the faucet first, and if the problem persists, consider having the water pipes and water system checked by a professional. Also, avoid using too much detergent or chemicals to clean your water cup or kettle.

There are no harmful substances, and it is generally considered that the water contains too many bubbles. After a little stillness, the white color disappears. The reason may be that the air cannot be discharged under pressure after the pipeline is overhauled, and it becomes a small bubble. Most of them are formed at a distance from the water supply company.

Our unit encountered the same problem, and later asked the water company to test, and the result was that the water quality was qualified and there was no problem.

If you wait a little and the small blisters disappear automatically, it is due to the tap and.

Water supply pipes. There are small bubbles caused by the pressure difference, it doesn't matter. If it persists for a long time, you can ask your neighbors if they have this phenomenon, and if everyone is like this, you can look for it.

Water Company.

of people to take a look. Theoretically, the water quality of the tap water plant is in line with the drinking water standard, but it causes secondary pollution in the input process. It depends on whether the main pipe is polluted, or your home's water pipes are polluted (some do not meet the standard. PVC pipes.

I guess I haven't washed it. Wash it with cold water a few times, then blanch it with boiling water a few times.

Hope it helps.

I know, I've had this kind of thing happen to me, it's the water quality problem. But then the water automatically cleared up again.