Comparison table of hook models and sizes

The comparison table of hook model size is as follows:

1. a sleeve hook. The sleeve hook is a table fishing.

Hand rod is the best to use and the most people of the hook type, whether it is traditional fishing, Taiwan fishing, or wild fishing, competitive fishing, are by the majority of fishing friends, the advantages of the flat sleeve hook are: the hook tip is sharp, the stinging fish is fast, because the hook is very thin, the fish is easy to suck in the mouth, the probability of fish on the fish in nature is relatively large. Sleeve hook general fishing white stripe choice

0 size of the hook number, wild fishing through the kill generally No. 2 start, commonly used No. 3 No. 4 sleeve, if the fish is relatively large, there are also people choose No. 5 No. 6.

2, Maruyo. The most commonly used fishing method is the skewer hook, almost 90% of the skewer hooks are tied with the Marushi hook, the biggest feature of the Marushi hook is the long hook handle, the narrow hook door, and the hook tip is oblique, which is conducive to the fish biting the hook, the stinging fish is very simple, I like to use this hook to fish the mouth.

Once there is a fish bite, you don't need to raise the rod to stab the fish, just tighten the rod line and reel in the line, so I like to use the Marushi hook the most, No. 1, No. 2, No. 3, No. 4, No. 5 can catch small crucian carp and other small fish, No. 6 and No. 7 fishing big crucian carp and other size of the kill, more than two catties choose No. 8, No. 9, No. 10, No. 11, No. 12 or larger hooks.

3. Iseni.

Iseni fish hooks are generally used to tie the copy hook, **hook, the hook tip is very slender, extremely sharp, the hook tip is adducted, and the fish is not easy to get off the hook. Sea rods.

Flaps are commonly used around No. 7, No. 8, No. 9 and No. 10.

The following is a comparison table of hook model sizes:

1.Iseni hook: No. 4-12, diameter of millimeters, hook depth of millimeters.

2.Sleeve hooks: No. 1-6, diameter of millimeters, depth of millimeters.

3.Izu hook: No. 3-No. 9, diameter of millimeters, depth of millimeters.

4.New Kanto hook: No. - No. 10, with a diameter of millimeters and a hook depth of millimeters.

5.Haixi hook: No. 1-No. 6, the diameter is millimeters, and the hook depth is millimeters.

6.Stream hooks: No. 5-8, with a diameter of millimeters and a depth of millimeters.

7.Maruyo hook: No. 3-No. 9, the diameter is millimeters, and the hook depth is millimeters.

8.Akita fox hook: No. 1-No. 4, with a diameter of millimeters and a hook depth of millimeters.

9.Small Iso Hook: No. 1-No. 6, with a diameter of millimeters and a depth of millimeters.

Hello hook is the most basic tool for fishing, composed of six parts: shank, hook handle, hook bend, hook tip, hook door, hook bottom, due to different designs, hooks can be divided into more than a dozen types, the most common hooks are Iseni hooks, sleeve hooks, Izu hooks, Shin Kanto hooks, stream hooks, sea hooks, followed by Maruyo hooks, white fox hooks, Senmata hooks, Akita fox hooks, Koiso hooks, and a few special hooks designed for specific fish such as eel hooks. When fishing, choosing the size of the hook becomes an extremely difficult problem. Of course, if you are in a competitive fishing ground or an intensive pond, and you know the size of the fish you are fishing, then the choice of hook size is clearer.

Even in the Nokawa Reservoir, as long as the fishing goal is clear, the size of the hook can be determined. However, if it is in the Wild River Reservoir, there is no clear fishing goal, so it is difficult to choose a hook.

Some anglers want to catch both large and small fish, and they will catch whatever fish they encounter, so the hook should be small rather than big. Choosing number 3 would be more modest. If you are fishing for small crucian carp, or small fish such as yellowtail or meal sticks, then a hook of 1 or 2 is sufficient.

But if we are aiming for carp and grass carp of about 3kg, then the hook can use the Yi 5 7 hook. If you want to catch larger grass carp or herring, you can use a 7 or 10 hook.

To sum up the selection of a hook in one sentence: the hook is about the same size as the fish's eyes. Big fish use a big hook, and small fish use a small hook. However, for different fish conditions and water conditions, the selection of hook size should be adjusted on this basis.

If you are fishing in new waters, it is better to choose a medium hook when fishing in a situation where the size of the fish is uncertain. The so-called medium-sized hook refers to the hook of 7-10, and the width of the hook bend is 5-7 mm. Such hooks are highly adaptable, and are generally suitable for large and small rivers.

Anglers should usually prepare several sets of hooks of different types when fishing in natural waters. Because there is so much uncertainty in natural waters, there is a mixture of fish, large and small. Different types of hooks are available, so you can change them at any time when you are fishing.

The choice of fish hooks, in addition to the normal situation, according to the size of the fish after the selection, but also according to the activity of the fish in different seasons to choose the hook selection, such as the same size of the fish, the size of the hook number selected in autumn and winter is not the same. FYI.

Common hook types: 1. Sleeve, universal sleeve, fox, Akita fox, Keiru, Kaiyu, Kanto, Shin-Kanto, Izu, Maruyo These are all hook doors with relatively narrow hook doors and straight hook tips, suitable for fishing smaller fish.

2. Iseni, Chimata, and Koiso, these are all hook doors with a wide hook door and a hook tip that curves inward, making them suitable for fishing larger fish.

3. Catfish, this model is a hook type specially designed for fishing sweetfish.

4. Three-legged anchor hook, this model is mostly composed of 3 Marushi hook type hooks welded together at a 60° radiation angle, and the small anchor hook is used in the lure of the lure fishing method, and the anchor hook with a particularly large number is usually used to anchor the fish (scrape the fish) with counterweights.

5. Squid special hooks, this type of fish hook is composed of multiple fish hooks (6-12 or more) welded together, radial, usually used with special bait wood shrimp, each wood shrimp is loaded with 1-2 groups of hooks.

6. Hair hook, this type of hook is mostly tied to the commonly used fish hook with animal hair and bird feathers to achieve the effect of simulating various insects, which is a bait, used to fish small fish in the stream that like to eat various insects.

The criteria for selecting hooks are as follows:

1) Good steel quality and sharp hook tip; Standard fishing is not bald, not pointed, pointed and round. When selecting, it is best to touch it with your hand lightly, and it should feel like sticky fishing.

2) The fishing line is tough and elastic; Good fish fishing should be the best in terms of hardness and toughness to withstand the struggling of the fish and the pulling of the rod. To do this, you can pull the tip with your hand and try its elasticity and firmness.

3) The barbs are distinct; The purpose of the inversion is to make the fish swallow the fish and never spit out and catch it again. It is made by cracking the bevel of the fishing rod at the lower part of the fishing tip.

The manufacturing process is very exquisite, the cracking is too deep, the angle of the formation of the thorn is too large, too warped, and it is not easy to make; The cracking is small, the inversion is not obvious, and it does not work. So it has to crack moderately. Some fish fishing also has a dorsal angle, and a 30-degree angle is the best.

Summary. Model |Diameter (mm) |Length (cm) |Aspect ratio |Applicable fish species ||1# | 3:1 |Low deep fish ||2#

1 |Offshore shallow fish ||3# | 3:1 |Shallow, medium and deep fish ||4# | 3:1 |Deep large fish (e.g. sea bass) |The hook size comparison table refers to the comparison of the appropriate hook model used to select the appropriate hook during the fishing process**.

According to different models, the shape and size of the hook vary greatly, which is used to adapt to different fish, so as to improve the success rate of fishing and hunting. Common hook models can be divided into 1 types.

Model |Diameter (mm) |Length (cm) |Aspect ratio |Applicable fish species ||1# | 3:1 |Low deep fish ||2# | 3:1 |Offshore shallow closed fissures fish ||3#

1 |Shallow, medium-deep, and deep-layer Hushu fish ||4# | 3:1 |Deep large fish (e.g. sea bass) |The hook size comparison table refers to the comparison of the appropriate hook model used to select the appropriate hook during the fishing process**. According to different models, the shape and size of the hook vary greatly, which is used to adapt to different fish, so as to improve the success rate of fishing and hunting.

The common hook-type pants can be divided into 1 types.

The diameter of the hook is 3:1, the length of the hook body is 3:1;2 models of hooks with a diameter and a hook length and an aspect ratio of 3:1;Model 3 hook with diameter, hook length, length-to-width ratio of 3:

The diameter of the hook is 3:1. Different types of hooks are suitable for different fish species, and the 1 type of hook is suitable for low-depth fish; Model 2 is suitable for shallow fish inshore; 3 models are suitable for shallow, medium and deep fish; Model 4 is suitable for large fish at depth, such as sea bass.

In addition, in the process of fishing, in addition to choosing the right hook according to the size of the hook model, it is also necessary to pay attention to the choice of timing, and provide bait for different fish species during their breeding period, which is conducive to obtaining fish species and improving the success rate of fishing.