Why does parquet creak when you walk up after it is laid? How to solve it?

The ground is uneven, and then before the renovationParquetThe lack of gaps around the perimeter and the symmetrical placement of heavy objects in the interior furniture will cause the parquet to creak when it is laid.

Socio-economic development is getting faster and faster, people's quality of life is constantly changing, many people in the family decoration, will choose parquet for paving, so that it looks not only advanced, but also easier to take care of, but in the process of living will also find that parquet has a creaking situation, we must pay attention to it in life, to avoid affecting the service life of parquet.

1. The ground is uneven, resulting in the creaking sound of the parquet floor.

Many new houses in the handover, if the ground is uneven, wanton paving parquet will also lead to part of the parquet and the ground between the gap, people will make noise when walking, and it is local, we can first measure the flatness of the ground in life, as long as the height of the whole ground in a room is less than three millimeters, then there will be no creaking.

2. The lack of reserved gaps leads to the sound of parquet.

Parquet must be closely paved with the ground, if there is a gap, there will be a certain sound when walking, it should be noted that most of the new houses are playing with solid wood doors, but with the use of the ground and the parquet gap between the ground and the parquet is getting smaller and smaller for a long time, it will also lead to a loud situation. If you want to avoid this phenomenon, you should keep sufficient gaps in the doorway, closet, balcony and other areas, and if the length is more than 8 meters when paving, you should do partitions and bridges, so as to better avoid the appearance of noise.

3. The symmetrical placement of heavy objects in the interior furniture causes the floor to make noise.

Chinese decoration style.

The family likes to place the furniture symmetrically, if it is a solid wood floor, it will also produce a giant bulge in the long-term extrusion process, when passing through an area, if there is a sound, it is necessary to observe whether there is symmetrical furniture, before the decoration, you should ensure that the heavy objects are placed on one side to avoid the phenomenon of bulging.

It may be that the quality of the floor is very poor, or the installation is uneven, or it may be that the quality of the sponge pad is poor, so there will be abnormal noise, you can rearrange the installation, or carry out construction inspection, or you can buy a better quality composite floor.

Because of the solid wood lamination, after the floor is paved, there is friction in the cracks, so there will be a sound when you walk up, it is recommended to consult the decoration master to reduce the friction of the floor.

It may be that several of them are warped, and it is recommended to contact the merchant to deal with it. That is, a worker will find out the problematic floor, and replace the one with the problem. You don't have to tear it all down.

It shows that the bite of this floor is not very good.

1. The sports wooden floor is empty.

If the sports wood floor is empty, there are many reasons, one is that the sports wood floor is not fixed when it is laid, the main reason is that the number of nails used is not enough, or it may be that the nails are not firmly nailed. The sports wood floor sports system is fixed with glue liquid, and the gluing does not meet the requirements will also cause the sports wood floor to be empty.

The reason for the abnormal noise of sports wood flooring may also be that the moisture content of the sports wood floor used has changed.

2. Prevention of air wages on sports wood floors.

In view of the common causes of sports wood floor empty wages, one by one elimination and prevention, we can effectively prevent sports wood floor empty wages.

When laying sports wood flooring, nails can not be used too little, in the laying process, each completed piece, must be tested with a foot step, if there is a sound of rework and then paving.

When purchasing and paving sports wood flooring, it is necessary to strictly check its moisture content, and the quality of the adhesive must also be strictly reviewed.

I'm sure we've all walked around the floor and made a noise when we encountered a certain piece of floor. Parquet flooring is mostly laid directly on the ground, and when people walk on the floor, if the floor moves up and down and collides, it will produce a sound. This is due to the noise produced by the friction between the sides of the floor.

In most cases, this phenomenon occurs after a period of time after the floor has been paved.

The reason is that the floor is in close contact with the ground, the floor does not move up and down when people walk, there is no relative movement between the sides of the floor, between the tongue and the tongue and the tongue and groove, there is no friction, and the sound naturally does not exist.

It can be seen that the key to solving the sound problem of parquet is to solve the phenomenon that the floor moves up and down in the process of people stepping on the floor.

Yahong Flooring, an expert in parquet flooring, believes that there are several reasons for the sound of the floor moving up and down:

1. The laying ground is not smooth enough.

Because the ground is not flat enough, after the floor is paved, there will naturally be a gap between the individual places and the ground, and there is space under the floor to move up and down when walking, so there will be a sound, and this situation will occur after the floor is laid, so it should be checked in time.

In view of this phenomenon, the measures taken are to measure the flatness of the ground before the floor is paved, and its flatness should be less than 3mm 2000mm.

2. When the floor is laid, the reserved gaps around the perimeter are insufficient.

The lack of reserved gaps when the floor is paved will lead to a slight qigong on the floor, and gradually the gap between the floor and the ground will be generated, which is characterized by the fact that it will not sound when it is just paved, and after a period of time, it will sound in a large area.

The measures taken to deal with this phenomenon are to leave enough gaps around the floor, especially in the doorway, wall kitchen, balcony and other areas to ensure that the reserved gaps are even. When the pavement length exceeds 8m, it should be treated with partition and bridge.

3. The connection of the moisture-proof film is breathable.

After the floor is laid, a large amount of ground moisture will penetrate into the back of the floor due to the damage of the moisture-proof film or the lack of sealing with tape in some places, resulting in uneven floor expansion, deformation and distortion of the floor, and also cause the gap between the floor and the ground, resulting in sound.

To solve this problem, before the floor is paved, the connection of the moisture-proof film must be sealed with tape to ensure that it is not breathable.

Finally, Yahong Flooring also reminds you that after the floor is paved, the interior furniture is still symmetrically placed on one side as much as possible, which can not only solve the problem of gaps in the parquet floor, but also solve the sound problem.

One is the installation quality problem.

Solid wood flooring needs to be laid with wooden keels, and if the wooden keels laid are uneven, the floor will make noises. This happens as soon as the floor is laid.

The second is that the floor only made a noise after a year or two of paving, because the wooden keel was wet and loose after a long time.

If there is a continuous sound when stepping on the foot and retracting it in the same place, it means that the keel has not been handled well, and the floor needs to be opened and the base layer needs to be redone.

If the sound is caused by the displacement of the wooden gasket under the keel and the keel partially sinks, the middle one can be extracted from several parallel floors with sound, and the wooden gasket can be inserted under the keel, and then the floor can be re-embedded.

Reason 1: The fastness of the connection between the floor and the keel is not enough.

When installing, the normal contact between the floor and the wooden keel should be plane contact, but due to the insufficient number of nails, the connection fastness between the floor and the keel is not enough, which is easy to cause uneven force on the floor. Therefore, when a person steps on the floor to exert pressure, it causes a slight movement and causes a noise.

Reason 2: The moisture content of the floor changes, causing distortion and deformation.

The floor produces deformation unevenness, distortion, warping and other phenomena with the dry and wet environment, which changes the accuracy of the floor groove fit, resulting in arching between the floors, and there will be a sound when stepping on it.

Reason 3: The floor has not been maintained after being laid, and it is urgent to use it.

After the floor is laid, there should be a 12-hour curing time before it can be used. In particular, the floor and the keel are fixed with glue, and there must be a curing period to make the glue solidify in order to be firmly linked, otherwise it will affect the firmness of the bonding and cause the floor to make a noise.

1. The home is laid with laminated or composite flooring, and there is no keel, but the original ground is uneven, and the wall is not leveled before the floor is laid, so the sound will definitely occur after the floor is laid.

Solution: Remove the original floor, re-level the ground and then lay it.

2. There is no glue bonding during the installation process, or the amount of glue used in the installation process is small or the glue position is wrong, which does not play the role of connecting or fixing the seams, resulting in mutual friction between the notches and producing sound.

Solution: Remove the floor and re-pave it with glue.

3. The gap around the floor is not fully reserved, or the floor mat is not sealed well, resulting in partial or overall arching after the floor expands, and the notch floats up and down to produce friction sound.

Solution: If the floor is slightly deformed due to the expansion of the floor mat due to the lack of sealing, it can be fully glued for construction, and the local new board can be replaced if it is seriously deformed.

4. The moisture-proof film is breathable. After the floor is paved, because the connection of the moisture-proof film is not sealed with tape, the moisture-proof film in some places is broken in the paving process, resulting in the leakage of moisture on the ground, especially in the geothermal environment, the ground is damp, and a large amount of moisture enters the back of the floor, resulting in uneven expansion, deformation and slight distortion of the floor, and the gap between the floor and the ground is generated, and the sound is generated in the process of stepping on.

The measure is that before the floor is paved, the joints of the moisture-proof film must be sealed with tape to ensure that they are not breathable.

Our house has just laid laminate flooring, why does it squeak when we walk.

Hello dear, glad to answer for you, <>

Our home has just laid laminate flooring, why does it squeak when you walk A1The wooden stall under the floor is not nailed to the ground. 2.

The floor and wooden stalls are not nailed. 3.The floors are not on the same level.

4.Poor quality flooring is generally a problem with installation technology. The workers did not have a good grasp of the dryness and humidity of the floor and the expansion and contraction ratio of the floor, (the bag was not opened before installation, and the floor was left indoors for two days), so the floor shrank, and there was a gap in the bite of the floor (tongue and tongue and groove hall calendar) and the sound was slowly generated.

In your case, you should find the installer to solve the uneven ground when laying the composite floor, that is to say, the base layer is not well handled, then when laying the composite floor, there is a gap between the floor and the keel, and after a long time, the thermal expansion and cold contraction are added.

Summary. The sound caused by the uneven ground of the solid wood floor installation is very common, mainly when the solid wood floor is not leveled, the floor and the keel are suspended or the wooden keel is not cushioned to produce the suspension, these are the reasons for the sound of walking on the solid wood floor after the installation of the solid wood floor, the solution to this situation is that if it is a small part, the part of the floor can be improved by essential oil penetration, if it is a large area, it is recommended to disassemble and reload.

Causes and solutions of solid wood flooring:

It is very common to change the sound caused by the uneven installation of solid wood flooring, mainly when installing solid wood flooring without leveling, between the floor and the keel or the wooden keel is not cushioned to produce suspension, these are the reasons for the sound of walking around on the solid wood floor, the solution to this situation is that if it is a small part, the part of the floor can be improved by essential oil penetration, if it is a large area, it is recommended to disassemble and reload.

Hello dear! 1. If there is a heavy object on the floor, because it cannot expand freely, the ground arches, and people walk at this time, it will make a sound. 2. If the floor is damp and the ground arches, if the situation is not serious, you can remove the damp floor to dry, or open the dehumidification function regularly every day to keep the floor dry.

3. If the floor is used for a long time, you can apply wax to the gap of the floor, and then melt the wax at high temperature and infiltrate the gap. Hope it helps.