How do I remove rust from my toilet? How to remove rust from the toilet

If you want to get rid of the smell of the toilet, you can look at the toilet directly, he has that toilet cleaner, you go directly to buy one and buy one online, and then go to clean it up The effect is better.

The rust produced in the toilet bowl is uric acid, which can be used to clean the toilet and be effective with one drop.

Hello. The detailed steps to clean up rust on the toilet bowl are as follows:

1. Toilet cleaner.

Cleaning method: Soak the toilet bowl with water first, then drip the toilet bowl cleaner evenly from the upper edge of the toilet bowl, soak for about 10 minutes, then scrub with a brush, and then rinse with water.

2. Vinegar. Cleaning method: Mix vinegar and water in a 10:1 ratio and pour into the toilet. Soak for 3-5 hours, and then drop the soil with one brush. After flushing the toilet, spray white vinegar on the inside of the toilet bowl and flush the toilet together next time to disinfect and deodorize.

3. Baking soda.

How to clean: Sprinkle an appropriate amount of baking soda in the toilet, soak it in hot water for half an hour, and then use the toilet brush to remove the dirt.

4. Shampoo cleaning method: If you are worried about the safety hazards of toilet bowl cleaner.

You can wash the toilet bowl with shampoo. In this way, children can sit on the toilet without feeling the smell.

5. Coke method: Coke contains a kind of citric acid.

Poured down the toilet. After soaking for about an hour, the dirt can be removed by brushing the toilet.

6. Detergent cleaning method: first put an appropriate amount of water into the toilet, rinse it with the toilet, then pour in 5-10 ml of detergent, apply it evenly with a brush, and then rinse it to achieve the cleaning effect.

There are several ways to remove limescale from the toilet bowl

Toilet cleaner, the most commonly used in the average family is definitely toilet cleaner. Simply put a little toilet cleaner on the brush and use the brush to remove the dirt from the toilet.

2. Vinegar. Vinegar is also an acidic substance, which can also remove dirt from the toilet bowl and is not very harmful to people. You only need to rinse with vinegar and brush off the dirt, and you can remove the dirt well.

3. Baking soda.

You can sprinkle the powder soda on the dirt in the toilet, let it sit for a while, and then brush it again, which will quickly remove the dirt from the original toilet.

4. Coke, pour Coke with Coke to remove toilet dirt, it is best to spare gloves in advance. When you pour the cola into the toilet, the acid in the cola will slowly break down the stain. After pouring, let the cola soak in the toilet bowl for a period of time (1 hour) or overnight, rinsing with plenty of water until the toilet bowl is clean.

The mouth of the water in the toilet bowl is rusty, in fact, this is urine scale, you can go to the Internet to buy a special cleaning agent for toilet urine scale can be easily cleaned, right.

There is rust in the toilet bowl, that is, the scale can be used to brush the toilet cleaner, and then use the brush to repeatedly brush the scale of the place can be removed, you can also use white vinegar and baking soda to mix water with the toilet brush can also effectively remove the scale, and you can also add the toilet cleaner to the tank to remove the scale, so that the air is fresher and the toilet bowl is cleaner.

1. Flush the toilet several times, flush it clean, and then use a large syringe for injection to suck up the water in the toilet, of course, you can use other equipment, as long as the water accumulated at the bottom of the toilet is sucked dry; 2. After blotting, stuff the toilet paper into the toilet, press it a few times, and suck out the water in the thick dirt, the toilet paper is soaked, and then replace the dry one and continue to suck until the toilet paper is no longer wet; If you don't have time, stuff more paper and go over to see it after a while; 3. The above two steps are to suck out the water in the scale, so that the toilet cleaner can fully penetrate into the inside to achieve the best and fastest descaling effect. 4. Then, use the toilet cleaner bought in the supermarket, pour out the toilet cleaner with a water cup, mix with water, and the ratio of water and toilet cleaner: 1 is OK.

Until the toilet cleaner submerges the top edge of the limescale, it is estimated that it will flow down. The dosage is about half a bottle to one bottle of toilet cleaner. 5. Then soak for 10 hours before rinsing to let the toilet cleaner slowly melt there.

When flushing, you will find that the water is no longer as clear as the toilet cleaner, it is muddy, and there is a lot of powder at the bottom, so flush it several times. If the scale is too thick, it will definitely not melt all at once, but the scale has melted and the surface is already very loose, you can use it for a few days to rinse off the soft scale on the surface, and then continue to operate from step 1. 6. General passage.

Two or three times, the scale is basically melted clean, even if it is not clean, it will be operated once to reduce one layer, and a few more operations can be done.

The hemp leg inside the water place, the excellent first can be replaced, and the second can be in and out of the show.

Wash with acid or wash with toilet cleaner.

Prepare the following tools and materials: toilet brushes, toilet cleaners, old toothbrushes, rags, disinfectant, rubber gloves, toilet paper.

3. Then pour disinfectant on the rag and wipe the water tank, flush button, toilet edge, and toilet washer.

4. Then use a paper towel to wipe the area on the toilet that has been wiped with disinfectant.

5. At this time, open the toilet lid again, and use the toilet brush to scrub the inner wall of the toilet, especially the various water outlets inside the toilet, and focus on cleaning.

6. Finally, press the water button, flush the toilet again with clean water, and use the water flow to flush the toilet brush. Then the toilet bowl is cleaned.

If the penetration is not deep, you can go to the supermarket to buy a bottle of tile cleaner to try, if the glaze of the toilet is not permeable enough to penetrate deeply, this is no way. I hope my answer will help you.

Is it in the porcelain basin of the toilet? Try using salty citrus. The toilet stains that have accumulated in the rental house where I live for more than ten years can be dealt with, and you must have no problem with rust like that. If you have more questions, you can click on ID to consult.

You can go to the building materials store to buy a bottle of porcelain detergent, pour it on the rust and wipe it with a towel.

If it's not very thick, a cheap bag of vinegar will do. If it's a lot, the supermarket has toilet cleaners.

You can use: oxalic acid, dilute hydrochloric acid sprayed on the rust part for a period of time and then brushed to brush off.

You add toilet cleaner and these should be able to be brushed off. There's nothing you can't brush off. Only have you said that it really can't be good? You hire a part-time worker to clean your house and make sure it gets you well.

The scale inside the toilet bowl is not easy to remove, it is recommended that you buy a special remover for toilet dirt online, which can be easily removed.

The rust in the toilet bowl cannot be brushed off, and the rust can be removed with oxalic acid

Oxalic acid can be bought to remove, this taste is more pungent, but the effect is very good.