What is the cause of water leakage in the toilet bowl and what is the cause of the leaking toilet bo

The reasons why a flush toilet leaks are as follows:1. The rubber ball valve is broken: once the rubber ball valve is broken, the sealing of the entire water tank is not good, just like there is a hole in the wooden barrel, so the water will continue to flow out.

2. Aging of the rubber gasket of the mixing port: After long-term use, the rubber gasket will become thinner and thinner, and eventually it will be completely aged.

3. The link between the floating ball and the water inlet switch is loose: open the toilet tank, we can see a small ball floating on the water surface, and the small ball is connected to the water inlet with a water pipe, check whether the connection between the two is tight, if it is loose, just tighten the connection.

4. The water tank is damaged by external force: the water tank may be damaged by external force, resulting in water leakage.

The causes of toilet water seepage include poor material, insufficient buoyancy, improper design, poor sealing of the connections of the drain valve, and toilet installation problems.

1. Inferior material

Some manufacturers blindly reduce production costs, and choose inferior materials to cause cracking at the outlet of the water inlet valve and the water inlet pipe itself during injection molding, resulting in sealing failure, and the water in the water tank flows into the toilet through the overflow pipe of the drainage valve, resulting in "long flowing water".

2. Buoyancy is not enough

When the water submerges the float (or floating bucket), the inlet valve still cannot be closed, so that the water continues to flow into the water tank, and finally flows into the toilet from the overflow pipe to cause water leakage. This phenomenon is especially noticeable when the tap water pressure is high.

3. Improper design

The mechanism of the water tank accessories interferes with the operation and leads to water leakage. For example, when the water tank is discharged, the float and the float rod will affect the normal reset of the flap and cause water leakage. In addition, the float rod is too long, and the float is too large, which causes friction between the water tank wall, affects the free lifting of the float, and leads to seal failure and water leakage.

4. The connections of the drain valve are not tightly sealed

Due to the poor sealing of the connection, the water of the non-disposable formed drain valve flows into the toilet through the overflow pipe from the interface gap under the action of water pressure, resulting in water leakage. Lift-type inlet valves, which can be freely changed in height, often leak if the sealing ring does not fit tightly with the pipe wall.

5. Toilet installation problems

The toilet was not installed properly when it was installed, resulting in the misalignment of the sewage outlet on the ground with the toilet drain diameter. In this way, yellow water, water and foul smell will come out. The installation is not professional, and the flange is not installed (the flange has a good fixing and anti-spillage effect).

1. If the tank is drained, the float and the float rod will affect the reset of the flap and cause leakage. In addition, the float is too long and the float is too large, which causes friction with the tank wall, affects the free rise and fall of the float, and leads to seal failure and leakage. The mechanism of the tank fittings caused disturbances during operation, which led to leaks.

2. The quality is not good. Manufacturers blindly reduce production costs When the inlet pipe and inlet pipe of the injection valve are injected, the poor material will cause cracks, resulting in the failure of the seal, and the water in the tank enters the toilet bowl through the overflow valve, overflow pipe, resulting in a long flow of water.

3. When the water pressure is very high, if the buoyancy of the float is insufficient due to the excessive pursuit of the miniaturization of the tank accessories, if the float overflows, the water inlet valve can not be closed, so that the water continues to flow into the water tank, and then into the toilet, and there is a water leakage.

4。The height of the lift inlet valve can be changed freely, and if the seal does not fit tightly with the pipe wall, leakage may occur. The fitting of the drain valve is not tightly sealed.

Disposable drain valves manufactured in a single use cannot be tightly sealed through a fitting. When hydraulic pressure is applied, water flows into the toilet bowl through the overflow pipe from the interface gap, causing the toilet to leak.

Leaking water in the water tank; clogged toilets; aging of internal parts; Leakage at sewer connections; cracks appear; There is a problem with the inlet or outlet group.

The reasons for a leaky toilet bowl are as follows:

There are many reasons for toilet leakage, so if you encounter this situation at home, you must first check the specific problem that makes the toilet leak. What are the causes of a leaky toilet? The details are as follows:

1.Leaking toilet tanks;

2.The toilet bowl is clogged;

3.Deterioration of internal parts of the water tank;

4.Leaking water at the connection between the toilet bowl and the sewer pipe;

5.cracks appear in the toilet bowl itself;

6.There is a problem with the inlet or outlet group of the toilet.

Many people have encountered the problem of water seepage in the process of using the toilet, the first thing to understand about the toilet seepage is the cause of water seepage, and only by knowing the cause of water seepage can it be solved, so what is the cause of toilet water seepage? Today I will answer for you, and friends who want to know may wish to take a look with us!

1. What is the cause of toilet water seepage?

1. Inferior material

Now there are some bad manufacturers in order to reduce the cost of toilet production, will choose some very inferior materials for production, which is easy to lead to the water outlet, water inlet pipe in the injection molding cracking, so that the toilet seal is poor, resulting in water through the drain valve from the overflow pipe into the toilet, resulting in water seepage.

2. The accessories are too miniaturized.

Nowadays, many brands of toilets in order to upgrade the product, will pursue miniaturization in the accessories, so that the buoyancy of the float is insufficient, when the water floods the float, the inlet valve still cannot be closed, so that the water will continue to flow into the tank, resulting in water from the overflow pipe into the toilet and causing toilet seepage.

3. Improper design

Nowadays, many toilets will have the problem of water leakage due to improper design of the toilet tank, which allows other accessories to interfere with each other when it is running. For example, if the float rod is too long or the float is too large, it is easy to cause the friction between the walls of the tank to increase, thereby limiting the free lifting of the float.

4. The connections of the drain valve are not tightly sealed

If it is not a one-time injection molded drain valve, it is easy to cause the joint to be poorly sealed, and the pressure of the tap water can easily flow from the gap into the toilet through the overflow pipe, resulting in water leakage.

Summary: The above is for you to share what is the cause of toilet leakage, I believe you have a corresponding understanding after reading the above sharing, I hope the above sharing can help you, if you need to know more about relevant information, please continue to pay attention to Qeeka Home**, will answer for you one by one.

The reasons for toilet leakage are: water tank failure, toilet material problems, and no filter on the inlet valve.

Damage to the buoy inside the tank, loose connection between the float and the water inlet switch can cause the toilet to leak. You can open the toilet tank and pull the buoy up and down with your hands, **whether the buoy is sensitive. If it's hard to move, there's a problem with the buoy.

Then check the connection between the float of the water tank and the water inlet switch, if the float is in place and the switch is not turned off, it will also cause the toilet to leak. The toilet bowl is made of inferior material or has been used for too long, resulting in cracks in the internal ceramics, which will lead to water seepage in the cracks of the toilet ceramics. If the inlet valve is not filtered, it will cause impurities in the water to easily clog the sealing ring of the toilet tank.

Small holes, resulting in the inlet valve can not be closed, the seal fails and water leakage occurs.

Toilets. Its technical characteristics are in that, in the upper part opening of the existing toilet S-type water trap, a cleaning bolt is installed, its cleaning bolt is mainly made up of an inspection port and a cleaning bolt gun, the inspection port is embedded on the S-shaped reservoir bend upper reserved opening, and the cleaning bolt gun is a tool used for removing the blockage. Toilets, toilets characterized by the human body sitting type when used, are divided into direct flushing type and siphon according to the flushing method.

Siphon type is divided into jet siphon type and vortex siphon.

Toilet bowl leakage refers to the appearance of water stains at the bottom of the toilet bowl and does not keep it dry properly, which can cause inconvenience and unhygiene. The causes of toilet leakage include the following:

1.Broken seal: If the seal between the bottom of the toilet bowl and the drain is not maintained properly, water seepage will occur. Seal breakage is generally caused by improper installation, age, or improper use.

2.Hose connection problems: If the hose connection between the toilet bowl and the wall is not properly connected, it can lead to water seepage problems. This is because the hose connection is not kept tight, allowing moisture to seep out of it.

3.Toilet floor problems: If the toilet floor is uneven or cracked, it will affect the toilet seal, which in turn will cause water seepage problems.

4.Problems with the toilet bowl itself: If there is a problem with the toilet bowl itself, including damage, aging, and undurability, it will lead to water seepage problems. This situation usually requires the toilet to be replaced to ensure toilet hygiene.

In short, the problem of toilet water seepage cannot be ignored, and it needs to be checked and repaired in time to ensure the normal use of the toilet and the hygiene of the toilet.

1. Failure to install it during installation: the sewage outlet on the ground is not aligned with the toilet sewage diameter, and the dirty water will leak out.

2. Brother Sou is not well sealed: the toilet flange is not installed or the flange is aging and cracked, and the main Yehong of the toilet flange is used to seal the leakage book to prevent leakage.

3. Loose toilet: caused by long-term use, the toilet and the ground are loose and leaking.

4. Toilet aging: the ceramic cracks inside the toilet are bursting and expanding.

Water seepage on the toilet is generally caused by the following reasons:

1.Aging or wear of the sealing ring: The sealing ring of the toilet bowl is generally made of rubber, and after long-term use, the sealing ring will be deformed or even cracked due to aging and wear, resulting in water seepage.

2.The water level is too high: If the water level in the toilet tank is too high, the water will flow into the toilet bowl from the channel through the flush valve, and if the flush valve is used for a long time, it will cause the seal to fail and seep water.

3.Scale accumulation: If the inside of the toilet bowl that has been used for a long time is blind and the scale is not cleaned for a long time, the scale will affect the sealing effect of the sealing ring and cause water seepage.

4.Loose water joints: If the inlet or drain connections of the toilet are not firm or loose, it will cause the water in the pipe to leak to the toilet bowl.

5.Improper installation: If the toilet is not installed properly, it can also lead to water seepage. For example, the rubber gasket seal is not placed in a suitable place during installation, or the height of the toilet water seal is not adjusted.

How to solve toilet leakage?

1.Replace the seal: Before replacing the seal, drain all the water under the toilet bowl and remove the seal. Take care to use the correct size seal and soak it in hot water for about 10 minutes before installation to increase its softness and facilitate installation.

2.Adjust the water level: Adjust the water level in the toilet tank to the normal range and keep it at a suitable water level to prevent water seepage caused by too high or too low water level.

3.Cleaning scale: Regularly clean the scale in the toilet, especially the dirt in the toilet bowl is not easy to clean, you can use a special cleaning solution to clean it.

4.Fasten the pipe connection: Check the toilet inlet and drain pipe to the pipe interface to make sure it is fastened and secure, preferably with sealant and fastening tools.

5.Reinstall the toilet: If it is water seepage caused by the toilet bowl itself, you can remove the toilet bowl and reinstall it, and add the necessary sealing materials to ensure the sealing effect. If something goes wrong, it is recommended to have a professional install it.