The home is on the first floor, how should I do a good job of moisture proof work when decorating?

The key point of moisture-proof construction.

Choose a good moisture-proof material.

Moisture-proof panels. This kind of board can have good moisture-proof performance because of the addition of green moisture-proof material. There are many wooden boards used inside the cabinet, such as cabinets and shoes. But the disadvantages are also obvious, because this kind of plate is relatively hard, must be cut by machinery, and it is inconvenient to cut at will.

Waterproof drywall.

Waterproof gypsum board has more silicone oil composition than ordinary gypsum board in the material structure. If the roof of the toilet and kitchen needs to be shaped, it is very difficult to use aluminum plate construction, and it is necessary to use waterproof gypsum board to make the roof, if you use ordinary gypsum board, it will definitely be damp and moldy.

Floor waterproofing mats.

The moisture-proof film laid on the floor keel can condense the moisture in the partition floor, leaving some side seams through the surrounding wall footings and sending them out into the air. It is also very cheap, and many flooring manufacturers can also give it away for free.

<> tile moisture and mildew sealant.

In the past, the tile gaps at home were made of white cement, which was particularly susceptible to moisture, mildew, and blackening, which greatly reduced the overall effect of the tiles. This phenomenon can now be avoided by using special caulks. Different colours of caulk are available to match the colour of the tile.

Desiccant. You can buy it in the supermarket. This can only be used as an emergency measure to prevent moisture after renovation. If the cabinet or wall is still wet, then find out the cause of the moisture as well and remedy it from the hard fitting.

Precautions for decoration moisture-proof construction.

There should be a gap in the corner.

The floor should not be laid too tightly, and a floor expansion joint of about 1cm should be reserved between the floor and the wall to leave a certain space for the thermal expansion and contraction of the board, so that the moisture under the floor is easy to escape.

The door panels are custom-made.

AMRY's door panels are edge-banded with a special edge banding machine, which can maximize the moisture on the ground and lie on the outside of the door panel. In the past, kitchen cabinets were handmade on site, and the edges were glued together, so the panels were easily deformed by moisture.

Keep an eye on the sink. The damp nature of the sink is heavier, and the cabinet material at the bottom of the ordinary sink is lignified. Some of today's well-made cabinets are custom-made, with stainless steel around the sink so that the cabinets don't get wet.

The balcony is not leaky.

Many people do not think of making a waterproof layer when they are tiled on the balcony, because when they are exposed to the sun and rain, water vapor will penetrate into the wall. Because this balcony must also be waterproofed.

First of all, you should choose waterproof coatings, you must buy *** when buying flooring, the gaps in the floor should be tighter, the sewer in the bathroom and kitchen must be done, and you should brush latex paint several times more, and you should usually open more windows for ventilation.

When decorating, you can have some moisture-proof flooring. Add more windows. Incandescent lamps can be installed. To use white walls.

You should do a good job of waterproofing, you should do it three times, so that there is no serious dampness. And it's usually very helpful.

Precautions for decoration on the first floor:

1. Pay attention to the lighting of the house when decorating the first floor, because the first floor is low and the light is easy to be blocked. Therefore, when decorating, you can use reflective decorative mirrors to reflect the outside light into the house, and you can also use bright tones to improve the light, and add a large mirror to set off, which will have a good effect.

2. Attention should also be paid to ventilation, because the air flow in the house on the first floor is not very good, so strong exhaust equipment can be installed, which can solve the full exchange of air between the indoor and external areas to a certain extent.

How to prevent moisture in the decoration of the first floor.

1. Intermittent ventilation.

In rainy weather, close the doors and windows in the southeast direction to reduce the entry of moisture into the room. It is best to open the windows to regulate the indoor air in the afternoon or evening, when the climate is drier.

2. Lime absorbs moisture.

Limestone can be packed into cloth and placed throughout the room to keep the air dry.

3. Air conditioning dehumidification.

I dehumidify it with an air conditioner, but it costs electricity, but saves trouble.

4. Moisture absorption box.

Moisture absorber boxes are generally used in wardrobes or shoe cabinets, integrating functions such as dehumidification, aromatherapy, and deodorization.

5. Moisture absorbent bag.

The moisture absorbent bag can absorb water and turn into jelly, and this moisture absorbent bag has a wide range, in addition to clothing, leather goods, stamps, cameras, computers, etc. can be found to help dehumidify.

You can buy some moisture-proof materials, but there is no basement, how to decorate will be very damp, as long as you design according to your favorite decoration style, you can recommend communicating with the designer.

First of all, you can try to lay waterproof materials on the first floor, which can effectively isolate the moisture from the outside from entering the room; It can also be filled with quicklime with cloth or sack and placed everywhere in the room to keep the room dry and play a role in moisture-proofing.

Tiles can be laid, because the tiles are not afraid of moisture and will not be damaged by moisture.

This kind of ground does not need to be moisture-proof, and it costs money to drift and is counterproductive. The plain concrete ground is in contact with the soil layer below, and this kind of ground should be moisture-proof, and it depends on whether there is a reverse beam at the bottom of the wall. According to the new national standard, the ground floor of the building must be treated with moisture.

Brush the floor before the ground decoration to increase the moisture-proof treatment. If you can, it's best to do underfloor heating, and electric underfloor heating can be used in the south to drive away the tide in wet weather. It is also possible to lay a moisture-proof film or insulation board to isolate the moisture from the ground before laying the ground.

Waterproofing the wall over and over again can't solve the problem of moisture, in the final analysis, it's wrong. Moreover, the effect of waterproofing the wall and floor is equivalent to making a bucket on the ground. Water vapor cannot be absorbed and emitted through walls and floors.

Waterproof and moisture-proof are two concepts, and through this sentence, you can see that the first floor house has many shortcomings when buying, and dampness is one of them. If you buy the first floor, then how to prevent moisture is something that must be considered, and it is also something that must be done when decorating, <>

The first-floor residence where you have moved in should pay attention to natural ventilation on a daily basis. If the north and south are permeable or the weather is clear, the outdoor air is drier than the indoor air, and natural ventilation can reduce the indoor relative humidity. In the rainy spring and summer, you can turn on the air conditioner to dehumidify, the effect is very good, many owners think that it is caused by the leakage of the bathroom water pipe, but in fact, the water on the bathroom wall has penetrated into the cabinet over time.

The owner should first open the exhaust fan or window to ventilate the moisture, and then make a waterproof layer on the bedroom wall at the back of the cabinet.

Brush the joints between the exterior wall and the ground several times, and brush along the wall 30 cm high and the bay window level. In addition to the shower wall, the wall of the bedroom or living room adjacent to the bathroom on the first floor should not be ignored, and the wall brush should be waterproof to at least 50 cm high to prevent moisture from damaging the furniture. Since the first floor is susceptible to moisture, when purchasing decoration materials, it is best to choose ceramic tiles instead of wooden floors, latex paint instead of wallpaper, and furniture to avoid all solid wood as much as possible.

Otherwise, wooden furniture is more likely to deform when it is damp.

Now the technology is very developed, many moisture-proof materials have been very mature, you buy back and ask the master to do a moisture-proof, in fact, it is to coat a layer of mud, it is very convenient not to affect other professional repairs, and you can also set a waterproof membrane if you are not at ease.

When decorating, you should add a moisture-proof board, so that you can decorate well, save money, and it will not be particularly trendy.

Add some plaster when pasting tiles, gypsum is absorbent, which can effectively prevent moisture.