What should I do if the ground floor is wet? What should I do if the ground is retiring?

The solution to the moisture regain on the ground floor is the method of applying waterproofing paint or waterproofing agent. In the process of ground decoration, attention should be paid to the construction quality of the filling layer. Clay should be used for the filling, and it should never be tamped with miscellaneous soil or building materials.

When filling, it is necessary to ensure that the thickness of each layer is about 20 mm. In addition, the loose fill and soak method cannot be used for construction, as this will increase the moisture content of the foundation soil. When laying the floor, a certain gap should be maintained between the floors, and the ground must be cleaned before caulking.

In the process of caulking, fine stone concrete should be used to caulk. If the floor slab is thick, a layered caulking method should be used.

1.Household air conditioners are a great tool to remove resurgence. When there is a musty smell in the room, you can turn on the dehumidification function of the air conditioner, which can effectively remove the moisture in the room and achieve the purpose of dehumidification.

Note that if you turn on the dehumidification mode of the air conditioner for a long time, the room will be drier, so the following opening and closing times should be set according to the situation in your own home. Check the cause of the moisture regain rate of the floor tiles on the first floor. If it is caused by hollow drums, clean up the floor tiles of the hollow drums and install them to solve the problem of moisture regain.

2.The following is an introduction to how to deal with the underlying resurgence of the relevant content, I hope it will be helpful to friends in need. Floor moisture protection is a crucial step in home decoration and has a great impact on the comfort of future living.

Therefore, when decorating the house, you must pay attention to the moisture-proof work on the ground. When laying the floor, a certain gap should be maintained between the floors, and the ground must be cleaned before caulking. In the process of caulking, fine stone concrete should be used to caulk.

If the floor slab is thick, a layered caulking method should be used.

3.Cracks that are usually millimeters or more wide are visible cracks in cement mortar or cast-in-place concrete floor slabs. Regular cracks usually occur along the longitudinal or transverse direction of the room and are formed by shrinkage cracks in the material.

Then check the ground for hollow drums. The test method can be gently tapped vertically along the ground with a wooden stick. If there is no percussion, there will be a hollow drum.

The above is the answer to the question of what to do if the ground floor is re-wet.

When the floor is damp, you can choose to open all the doors and windows, dry it well when the sun is stronger, and then lift the floor at the bottom of the floor to do the corresponding moisture-proof and waterproof facilities, coat the waterproof layer, and then choose the laying of the floor after the waterproof layer dries.

In this case, you should choose to make a layer of moisture-proof layer and waterproof layer to prevent resurgence, you can choose to re-do the floor, usually maintain a dry environment at home, try to avoid opening windows, and reduce the ventilation effect.

You can open more windows for ventilation, you can also turn on the air conditioner to remove moisture in the room, and you can also find some relevant professionals to deal with it, because this situation is very troublesome, and it is difficult for us to solve it personally.

Open windows frequently for ventilation. This is the easiest and most effective way to do it.

When you feel that the weather is changing from cold to warm, please close all doors and windows immediately, and do not open the exhaust fan as much as possible except for cooking, so as not to draw the humid air from the outside into the room.

Turn on the air conditioner to dehumidify. Use a dehumidifier or refrigeration setting to dehumidify the room, and if the moisture regain is too strong, it is recommended to use a dehumidifier, which will be more effective. Pay special attention to remember to close the doors and windows when turning on the air conditioner to promote dehumidification.

It is generally difficult to completely dehumidify the floor of the room after the moisture returns, you can spread some newspapers and waste books on the ground to absorb water, and if possible, you can also sprinkle some chaff or sawdust on the floor, which can not only absorb water and dehumidify, but also prevent slipping.

Precautions for moisture-proof home improvement.

1. Gaps need to be left in the corners: when laying the floor, it is not necessary to be so tight, and between the wooden floor and the corner, it is best to leave a telescopic gap of about 1cm, so that the moisture on the ground can be more easily dissipated.

2. The door panel is customized: Usually the door panel of the customized cabinet is treated by a professional edge banding machine, and the effect is relatively good, which can maximize the water and air isolation outside the door and play a certain moisture-proof effect.

The above content refers to People's Daily Online-Five tips for moisture-proof at home.

The air is humid in the south, and the home floor is also relatively easy to get damp. At this time, you can try the following methods: Method.

1. Air conditioning dehumidification; Use a dehumidifier or refrigeration setting to dehumidify the room, and if the moisture regain is too strong, it is recommended to use a dehumidifier, which will be more effective. Pay special attention to remember to close the doors and windows when turning on the air conditioner to promote dehumidification. Method.

2. Hygroscopic with desiccant; Commonly used household hygroscopic agents include quicklime, charcoal, activated carbon, etc. In particular, quicklime has a good water absorption effect, but the disadvantage is that quicklime (CAO) becomes mature lime calcium hydroxide (Ca(OH)2) after water absorption, which cannot be reused.

Charcoal is much less hygroscopic than quicklime, but it can be reused after drying. In addition, other desiccants with slightly higher costs include silica gel, calcium chloride, alumina gel, molecular sieve, phosphorus pentoxide, etc. The desiccant is wrapped in newspaper and placed around the house or under the bed when the weather returns.

If the desiccant is mixed with a small amount of sand, the permeability of the desiccant can be increased, and the effect of moisture absorption can be improved. Method.

3. Spread some newspapers, waste books, etc. on the ground to absorb water, and if possible, you can also sprinkle some chaff or sawdust on the floor, which can not only absorb water and dehumidify, but also prevent slipping.

If it is on the ground floor, it is necessary to deepen the outdoor drainage ditch to keep the drainage smooth, pay attention to the good ventilation of the room, the air can produce better convection, and the windows should be rectified if they are not reasonable. If you do the above two things, you will generally not regain the tide.

The weather gradually becomes hotter and the rainfall increases, which increases the water vapor content in the air, and the doors, closets, walls, glass, and floors at home are cooler than the air, and the water vapor in the air can liquefy when cold, resulting in resurgence.

Friends who live on the ground floor may find some damp and cold in the room every summer, but this is actually a relatively common situation. Ground floor moisture regain is also a common occurrence. So what about the resurgence of moisture on the ground floor?

How can this be solved? You'll know after reading it. <>

What should I do if the ground floor is wet?

Waterproofing agents or waterproofing paints can be used. In the process of floor decoration, special attention should be paid to the construction quality of the infill layer. When filling the soil, try to choose clay and avoid using miscellaneous soil or ordinary building materials to compaction.

During filling, it is necessary to ensure that the thickness of each layer is maintained at about two centimeters. In addition to this, do not use the soaking method as well as the loosely filled method, as these methods may increase the moisture content of the foundation. When laying floor tiles on the ground floor, it is necessary to maintain a certain gap between each floor tile, and after the floor tiles are laid, the ground should be cleaned and then caulked.

Ground floor moisture resurgence can also be mitigated by air conditioning. Because the air conditioner can effectively improve the situation of moisture regain, it can also remove the smell of mold in the room, so as to achieve the effect of removing humidity and improving air quality.

How should this be solved by the resurgence of the ground floor floor?

When the ground floor is damp, you can open the doors and windows to dry the room in the sunny afternoon, or you can use waterproofing agents or waterproof coatings, or turn on the air conditioner to improve the dampness of the room. In ordinary times, you can also use some desiccant, lime powder or activated carbon, these products can achieve a certain moisture absorption effect. Put the lime powder in a cloth bag, seal it and throw it under the bed or in some inconspicuous corner, so that the lime powder can absorb moisture and relieve the excessive humidity in the house.

If you can afford it, you can also choose to buy a professional dehumidifier, which works quite similarly to a vacuum cleaner, mainly to adsorb water vapor in the air, so as to avoid too humid in the home. Using a dehumidifier can also improve the air environment and make people feel more comfortable.

The floor tiles on the first floor are generally waterproof and not in place, so you can apply a layer of waterproof paint or waterproof agent on the floor tiles, but before painting, the surface layer should be chiseled, and then cleaned, and then painted so that the adhesion is stronger, and it can also penetrate into the pores.

First of all, indoor air circulation should be maintained, and doors and windows should be opened as much as possible to ventilate and ventilate, which is conducive to effective evaporation of water; In the process of decoration, we should pay special attention to the quality of construction, do a good job of moisture-proof treatment, and can use desiccant to prevent damp and dehumidification dryness and reasonable placement.

Be sure to strengthen ventilation, you can properly maintain indoor air circulation, but also choose waterproof agent to apply, you can use quicklime.

Enter the area and get the decoration for free**].

Ground moisture return is a very common phenomenon, especially in southern cities, but after the ground moisture return, the indoor environment will become very humid, and even emit odors, causing a lot of inconvenience to home life, so how to deal with the ground moisture return on the ground floor? How to prevent moisture on the ground? Let's take a look!

First, how to deal with the ground moisture on the ground should be closed in the case of heavy external moisture, and the windows should be opened more for ventilation, so that the indoor water vapor content is reduced, in addition, when the ground is damp, you can sprinkle lime on the ground, or put the lime into a bag, placed in the room, if the above methods can not alleviate the problem of ground moisture, you can buy a dehumidifier. Second, how to prevent ground moisture-proof 1, in the process of ground decoration, need to pay attention to the construction quality of the fill, first of all, the fill should use the way of clay ramming, must not use miscellaneous soil or building materials for ramming, and when filling the soil, the family shouts to ensure that the thickness of each layer is about 20 mm, in addition, can not use the loose fill immersion method for construction, because this will increase the water content of the foundation soil. 2. When laying the floor, a certain gap should be maintained between the floors, and the ground must be cleaned before caulking.

In the process of caulking, it is necessary to use fine stone concrete to embed the joints, and if there is a situation where the ground slab is thick, the method of layered caulking should be adopted. 3. In the process of ground construction, the ground moisture-proof needs to be combined with the moisture-proof wall base, and the wall base should be coated with waterproof mortar, and the inner wall in contact with the ground should also be coated with waterproof mortar. In addition, it should be noted that the difference between the indoor and outdoor height of the moisture-proof floor should be more than 30 cm to prevent rainwater from seeping into the room.

Summary: The relevant content of how to deal with the return of moisture on the ground on the ground floor is introduced here, hoping to help friends in need. Ground moisture-proof is a vital step in home decoration, which has a great impact on the comfort of living in the future, so we must pay attention to the ground moisture-proof work when decorating the house.

Do the math how much it will cost you to renovate your home

Everyone wants the home to be clean and dry, living in this environment is more comfortable, to keep the home dry ground, it is not a very easy thing, especially in the rainy season, it is easy to make the home more humid, the following will introduce to you how to do the ground at home.

1. Open the window correctly for ventilation.

In order to prevent moisture from entering, the doors and windows are closed, and they feel that as long as they are isolated from the outdoor air, they can be moisture-proof, and it turns out that in fact, the moisture in the air is infiltrated from the kitchen and bathroom, and the doors and windows are closed to the effect of moisture-proof, and it is easy to breed bacteria, which is harmful to human health. The most important time for moisture-proof is morning and evening, it can be said that these two times to open the window for ventilation, so that the tile can be exposed to the sun, so that the water can also evaporate quickly, to achieve the effect of dehumidification.

2. Wipe the floor with a soft rag.

Cleaning the floor can be said to be indispensable homework every day, most people use a soft cloth to dry wipe it, if you encounter a stain that needs to be cleaned with water, it is recommended that you use a non-dripping rag to wipe the floor. After wiping the floor, you must not open the window in this humid weather, otherwise the floor will become wetter, you can wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.

3. Salt water mopping the floor.

Heat the skin of the water shirt first, as long as it is not hot to this temperature, about 40 degrees Celsius, add a spoonful of salt to the hot water, stir, after the salt is fully dissolved, you can start mopping the floor. After the mop is soaked, it must be wrung out to mop the floor, you must know that the mopping floor is a lot clean, the main reason is that the temperature is also a lot of big relationships, the higher the temperature used, the faster the volatilization rate, so that the dragged out of the floor will dry faster, and the salt is very absorbent, so that the ground can be kept dry for a long time.

Summary: The relevant content on how to deal with the ground moisture return at home is introduced here, and you can follow the above methods, so that the ground moisture return is solved. If you want to know more about related knowledge, you can consult Qijia.com.