If you want to decorate the first floor to prevent moisture, how should you decorate it?

Updated on home 2024-07-07
11 answers
  1. Anonymous users2024-02-12

    This kind of ground does not need to be moisture-proof, and it costs money to drift and is counterproductive. The plain concrete ground is in contact with the soil layer below, and this kind of ground should be moisture-proof, and it depends on whether there is a reverse beam at the bottom of the wall. According to the new national standard, the ground floor of the building must be treated with moisture.

    Brush the floor before the ground decoration to increase the moisture-proof treatment. If you can, it's best to do underfloor heating, and electric underfloor heating can be used in the south to drive away the tide in wet weather. It is also possible to lay a moisture-proof film or insulation board to isolate the moisture from the ground before laying the ground.

    Waterproofing the wall over and over again can't solve the problem of moisture, in the final analysis, it's wrong. Moreover, the effect of waterproofing the wall and floor is equivalent to making a bucket on the ground. Water vapor cannot be absorbed and emitted through walls and floors.

    Waterproof and moisture-proof are two concepts, and through this sentence, you can see that the first floor house has many shortcomings when buying, and dampness is one of them. If you buy the first floor, then how to prevent moisture is something that must be considered, and it is also something that must be done when decorating, <>

    The first-floor residence where you have moved in should pay attention to natural ventilation on a daily basis. If the north and south are permeable or the weather is clear, the outdoor air is drier than the indoor air, and natural ventilation can reduce the indoor relative humidity. In the rainy spring and summer, you can turn on the air conditioner to dehumidify, the effect is very good, many owners think that it is caused by the leakage of the bathroom water pipe, but in fact, the water on the bathroom wall has penetrated into the cabinet over time.

    The owner should first open the exhaust fan or window to ventilate the moisture, and then make a waterproof layer on the bedroom wall at the back of the cabinet.

    Brush the joints between the exterior wall and the ground several times, and brush along the wall 30 cm high and the bay window level. In addition to the shower wall, the wall of the bedroom or living room adjacent to the bathroom on the first floor should not be ignored, and the wall brush should be waterproof to at least 50 cm high to prevent moisture from damaging the furniture. Since the first floor is susceptible to moisture, when purchasing decoration materials, it is best to choose ceramic tiles instead of wooden floors, latex paint instead of wallpaper, and furniture to avoid all solid wood as much as possible.

    Otherwise, wooden furniture is more likely to deform when it is damp.

  2. Anonymous users2024-02-11

    Now the technology is very developed, many moisture-proof materials have been very mature, you buy back and ask the master to do a moisture-proof, in fact, it is to coat a layer of mud, it is very convenient not to affect other professional repairs, and you can also set a waterproof membrane if you are not at ease.

  3. Anonymous users2024-02-10

    When decorating, you should add a moisture-proof board, so that you can decorate well, save money, and it will not be particularly trendy.

  4. Anonymous users2024-02-09

    Add some plaster when pasting tiles, gypsum is absorbent, which can effectively prevent moisture.

  5. Anonymous users2024-02-08

    You can buy some moisture-proof materials, but there is no basement, how to decorate will be very damp, as long as you design according to your favorite decoration style, you can recommend communicating with the designer.

  6. Anonymous users2024-02-07

    First of all, you can try to lay waterproof materials on the first floor, which can effectively isolate the moisture from the outside from entering the room; It can also be filled with quicklime with cloth or sack and placed everywhere in the room to keep the room dry and play a role in moisture-proofing.

  7. Anonymous users2024-02-06

    Tiles can be laid, because the tiles are not afraid of moisture and will not be damaged by moisture.

  8. Anonymous users2024-02-05

    Everyone knows that the house chooses the middle floor, generally speaking, like the first floor and the top floor are not liked by people, for example, the lighting is not good on the first floor, and it is relatively humid. Let's introduce to you how to prevent moisture in the decoration of the first floor.

    The ground moisture-proof can be brushed before decoration, and a layer of moisture-proof film can also be considered on the ground; It is recommended to brush the wall solid for the wall moisture-proof, or you can choose to paste tiles on the wall, and if the conditions are good, you can also brush a layer of waterproof paint outdoors; The top surface can be brushed with moisture-proof wall, moisture-proof putty, or latex paint.

    What are the moisture prevention measures after moving in?

    1. Intermittent ventilation.

    In rainy weather, keep windows and doors closed to reduce the inflow of moisture, and it is best to open the windows in the afternoon and evening.

    2. Lime absorbs moisture.

    Put some limestone in a cloth and place it in all corners of the room to keep the indoor air dry.

    3. Air conditioning dehumidification.

    You can use an air conditioner to dehumidify, but it wastes a lot of electricity.

    4. Moisture absorption box.

    Put some moisture absorption boxes in the wardrobe and shoe cabinet, which can not only dehumidify, but also deodorize and other functions.

    5. Moisture absorbent bag.

    Moisture absorbent bags can be used in a wide range of applications, and in addition to being placed on clothing, they can also help dehumidify indoors.

    What are the precautions for the decoration of the first floor.

    1. Add some light sources in the room, especially fluorescent lamps, which are on the ceiling and wall, the effect is very good, and you can also use some spotlights to hit it on the light-colored painting, and the effect is also very good.

    2. Do not consider placing a mirror in a suitable position, you should know that the mirror can play the role of reflecting the light source, and placing a mirror in a position close to the light source has the effect of supplementing light. For example, installing a mirror in front of the window is also very effective.

    3. If the house has no lighting, it is necessary to use a small amount of solid walls for partitions, or if it will not block the light, you can use more transparent partitions, such as half-height partitions and curtains. You must not put too much furniture and decorations, or it is not easy to produce dead corners, and the space will be darker.

    4. Try to choose some simple and clear furniture, so that the space looks more transparent. It is also necessary to make suitable furniture according to the specific situation of the house, such as using more ceiling lamps and using suspended ceilings with caution.

    5. You can use white as the basic color, with reflectivity, so that the interior is brighter, and it is best to control a tone in the whole space, try to use light tones as much as possible, and avoid dark colors.

    Summary: The relevant content of how to prevent moisture in the decoration of the first floor is introduced here, and the above methods can be used to decorate a floor, which can play a role in moisture-proofing. If you want to know more about related knowledge, you can consult Qijia.com.

  9. Anonymous users2024-02-04

    1.Install a fresh air dehumidification system.

    The fresh air dehumidification system refers to the fresh air dehumidification host reaching each room in the room through the pipeline, and dehumidifying or ventilating each room according to the needs of different seasons and periods.

    2.Raise the ground moisture barrier.

    Whether it is a basement or a first floor, if you want to effectively prevent moisture, the best way is to redo the ground, that is, remove the original ground and raise it to make a moisture-proof layer. If the space of the house is higher, then the moisture-proof layer should also be appropriately heightened, the higher the separation from the soil layer, the better the moisture-proof effect.

  10. Anonymous users2024-02-03

    First, it is necessary to make it clear that it is waterproof ≠ moisture-proof.

    Waterproofing refers to preventing water from penetrating into our indoor ground or wall, waterproofing is to prevent liquid water, and the best solution for waterproofing is to choose good waterproof materials and construction parties.

    Especially for basements, if the waterproofing is not done well, there is not much point in moisture protection.

    Moisture-proof refers to preventing items and spaces from being affected by moisture, mainly for air humidity, is to prevent underground moisture (gaseous water), and daily dehumidification mainly refers to the removal of excess moisture in the air.

    Do not use waterproof methods to deal with moisture-proof problems. Otherwise, over time, under the action of underground tidal pressure, it will lead to blistering and falling off of the waterproof coating layer. Not only will it not be able to protect against moisture, but it will also lose its waterproof function.

    2. How to prevent moisture in the house that has been occupied?

    1.Commonly used dehumidification methods in life:

    l Natural ventilation: If the north and south are permeable or the weather is sunny and the outdoor air is drier than the indoor air, natural ventilation can reduce the indoor relative humidity.

    l Air conditioning: In this season, the air conditioner is generally turned on at home, in fact, it is not necessarily dehumidified, when the refrigeration is cooled, the effect is very good, and the doors and windows should be closed as much as possible when the humidity is high to prevent moisture from entering.

    l Desiccant: Put some adsorption desiccant in the room, the most common is the activated carbon carbon pack, you can also sprinkle some desiccant on some humid corners and ground, you can crush the mothballs and sprinkle the activated carbon powder there to remove moisture, but the desiccant must be replaced every once in a while.

  11. Anonymous users2024-02-02

    Nowadays, many people will buy low-rise houses for their parents, so that it is convenient for the elderly and children to walk. Many elderly people like to buy a one-story house, so that they can avoid the troubles of waiting for the elevator and climbing the stairs, so how to decorate the house on the first floor after buying it back to prevent moisture? Today, I will talk to you about this problem, and interested friends can follow along to find out.

    1. How to prevent moisture in the decoration of the first floor.

    1. When the humid weather comes, we should pay attention to closing the doors and windows to prevent moisture and moisture from penetrating into the home. We can always keep an eye on the weather, if we find that the weather is wet or it is going to rain, then we should close the windows and doors in time, so that not only can we prevent moisture, but also prevent mosquitoes in summer.

    2. We can use newspaper to absorb moisture, we can use newspaper to cover in humid places, and we can also cover some newspapers in some places that are easy to return to moisture and have not yet returned to moisture, so that it has a great effect on indoor moisture-proof and huge tide.

    3. If you live on the first floor, dehumidifier is essential, dehumidifier and dehumidifier box are currently the simplest and most convenient supplies, many people will buy a large number of dehumidifiers in supermarkets or online to put them at home for backup, put dehumidifiers in every corner of the home or places that are easy to produce moisture, dehumidifiers have the effect of adsorbing water vapor, but don't forget to replace them regularly.

    4. Lighting some scented candles can also remove moisture, and if the moisture returns at home, we can also light some scented candles, because scented candles can make water vapor unable to connect to the air, and can make the air dry, so that some damp smells can also be removed.

    The above is a summary of the relevant content and information on how to prevent moisture on the first floor, I hope it can help you. If you have any other questions, you can leave a message at the bottom of the platform, and we will solve the problem for you in time. Finally, if you have any questions about home furnishing and home decoration, you can pay more attention to Qeeka Home.

Related questions
10 answers2024-07-07

The first floor is a floor that many friends prefer, especially for users with limited physical strength, there are many conveniences and speeds to live on the first floor, and it is more convenient to enter and exit, so you don't have to hate the staircase, but the most troublesome thing is that the first floor is more humid, because the first floor is closest to the surface, so it is easy to get wet, especially in continuous rainy weather. Too much humidity in the house also has a great impact on human health, so it is necessary to deal with the dampness on the first floor in time. Here are some tips for dealing with moisture. >>>More

14 answers2024-07-07

The first floor is a floor that many friends prefer, especially for users with limited physical strength, there are many conveniences and speeds to live on the first floor, and it is more convenient to enter and exit, so you don't have to hate the staircase, but the most troublesome thing is that the first floor is more humid, because the first floor is closest to the surface, so it is easy to get wet, especially in continuous rainy weather. Too much humidity in the house also has a great impact on human health, so it is necessary to deal with the dampness on the first floor in time. Here are some tips for dealing with moisture. >>>More

23 answers2024-07-07

The first floor is generally easy to regain moisture, especially in the rainy season, there are water droplets on the walls on the first floor, and the decoration wants to change, which is a little difficult. High-rise, there are garages underneath, generally not damp,) If the old house in the past, there is no ventilation hole in the low ground, the floor is not separated from the ground, the ground is easy to be damp, when decorating, the ground is made a layer of waterproof, the wall is also waterproof to half the height of the room, the wall is painted with latex paint, do not decorate too much, the putty wall can also absorb a little moisture, it is best to install ** air conditioning, when the humidity is severe, you can turn on the air conditioner to dehumidify, decorate less tiles, reduce the moisture in the house condensation into water droplets.

17 answers2024-07-07

You can design a tea table in this small courtyard, you can plant more green plants, so that it is more beautiful, first of all, we must pay attention to the size of the space, pay attention to the lighting problem, so that we can better build a beautiful small garden.

16 answers2024-07-07

Pay attention to waterproof and moisture-proof, indoor ventilation and lighting in the house, but also pay attention to the installation of floor drains and the design of the circuit, consider the placement of kitchen appliances in advance, and design the circuit well, otherwise after the kitchen is decorated, it will destroy the overall decoration effect of the kitchen. >>>More