If you don t want to be pitted, what should you pay attention to?

You can consult a few more, if you know friends, you can also ask some friends, check some information from the Internet, shop around, choose a few more tiles, from the first, quality can be more choice.

Find some more reliable masters, through the recommendation of acquaintances, you must know the method of acceptance of tiles, effectively prevent being pitted.

Attention needs to be paid to supervision. When the master is laying the floor tiles, he should supervise whether he has alignment joints and whether the gaps are as big as they are left.

<> "These two places in the house must be tiled.

Now a lot of family things, when decorating the ground, the main material used is ceramic tiles, for example, our home, our home is ready to use the material of ceramic tiles to decorate the ground, when pasting tiles, I don't know how to paste, but after listening to the master at home, I know that these places are to be tiled, otherwise you will regret it.

The first place is the bathroom, because the bathroom is a relatively humid place, and it is also the place where we use the most times, so we must paste tiles when choosing the ground material, because we wash clothes and take a bath in the bathroom, so we must paste tiles in the bathroom to prevent some unnecessary problems, in the past, many people in the bathroom when decorating, will use lime to decorate the bathroom, although at the beginning, you will feel that there is not much of a problem, But after a long period of use, you will find that the material of lime is very poor, and after a period of use, you will find that it will fall off. So that's one of the drawbacks of lime. So when we are decorating the bathroom, we must use the material of ceramic tiles, and now many young people are more fond of fashion factors, so when we are pasting tiles, we can also match, and the effect is also better.

There is also a quiet high place that is the most important, then it is the kitchen, because the kitchen is where we cook, and when we are stir-frying or cooking, there will definitely be oil smoke, and with the growth of time, then these oil smoke will become oil stains and cover some places. Whenever we want to clean, but find that it is particularly troublesome to clean, so we must use the material of ceramic tiles when we start to decorate the kitchen, because the material of ceramic tiles is very convenient in Qingzi, and it is particularly labor-saving.

When you are decorating the house, you must paste tiles in these two places, the effect is very good, and the most important factor is that you can make yourself very convenient when you clean up, so that it brings a certain convenience to your life.

From the point of view of decorative effect, the chamfer "pressed strip". The tile chamfer is more beautiful and grade, with edges and corners, and the overall coordination is strong. As for the strip, to be honest, most of the colors will be very different from the tiles, the viewing degree is not enough at all, and if you want to improve the decoration grade of your home, remember to carry out anti-slip treatment.

Wives and children, husbands, children, the elderly, pregnant women, slipping and falling, big or small, will cause family misfortune. Slipping on the ground is the number one accident in the family. Pay attention to the arrangement method, the overall effect, the beauty of the paste should be considered from the firm seam and horizontal and vertical vertical, but also consider the non-slip and easy to clean.

<> bathroom because the daily water vapor is heavier, so pay attention to waterproofing when pasting tiles, you can use tile adhesive to strengthen the fit of the tiles, the wall will become worse after waterproofing, and it is easy to fall off the tiles without tile adhesive, so it is necessary to The bathroom is heavy because the daily water vapor is heavier, so you should pay attention to waterproof when pasting tiles, you can use tile adhesive to strengthen the fit of the tiles, the water absorption of the wall will become worse after doing waterproofing, and it is easy to fall off the tiles without tile adhesive. Therefore, after pasting the tiles, the carpenter can enter the field to do the ceiling wardrobe cabinets, of course, the furniture part can go, and the factory will do a good job of on-site installation, which is more trouble-free, and pay attention to the buried pipes and air outlets in advance when doing the ceiling.

Introduction to the steps of decoration construction: The first step is the transformation of the wall, that is, the bricklayer project. The second step is the transformation of water and electricity, and the arrangement of water pipes and wires in the home.

The third step is the bricklayer's tiling or the carpenter's ceiling. The fourth step is to make these things clear, and the floor should be wrapped with a protective film, otherwise the paint will be difficult to clean! At that time, because the wall was uneven, there were many layers of low ash, and there were cracks, pasted a net, called a painter to do more than ten days, and then the ceiling of the kitchen and dining room paid attention to the acceptance of tiles, horizontal and vertical, no hollow drums, no warped corners, after the bricklayer acceptance, you can contact the carpenter master to do ceilings, cabinets, bedroom doors, bathroom door measuring rulers, stone countertops, window sill plate measuring tapes.

When pasting tiles, you must buy the glue for tiles, you must not believe the opinions given by some unprofessional people, and you must ask professional masters, let these professional personnel to paste tiles for us, and do not buy some bad tile adhesive to paste.

First of all, you must choose a professional decoration team, and you must choose some waterproof tiles, after pasting the tiles, do not open the window for ventilation in a short time, and do not choose some of the smell is relatively large.

First of all, it is necessary to carry out a certain treatment on the wall, to eradicate the previous wall skin, after tiling, the tile must be soaked, so that the tile has enough humidity, and the tiling must be brushed with adhesive, when pasting must be on the joint, must pay attention to the appearance.

The problem to pay attention to is to paste from the bottom to the top, so that the tiles will not break, so when pasting, it will be more stable and the adhesion is very high.

When pasting tiles, we must pay attention to not having any gaps below, and we must pay attention to choosing better materials when buying tiles, so as to ensure that there will be no problems in the process of use.

If the floor tiles that other people don't want are very new, you can install them in your own home, so you can save money, and there is nothing wrong with it.

If the tiles are in good condition, they can be used to install in your own home, although they are old, but they do not affect the use.

I don't want the floor tiles of other people's homes, I don't think it's good to install them in my own home, and other people's things are old.

I don't like to use things that others have used, I live in this world by myself, not to feel better to others, I dislike things that others have used, I like to use new ones.

This kind of is okay, the main thing is suitable, as long as you like it, it's okay.

If you don't want the floor tiles in other people's homes, it should be good to install them in your own home, at least there is no waste.

Where other people's homes don't use, I'd better not install them in my own home.

Go and see your house, is it a new building? Or do you mind a re-penalty? If you want, it's not someone else who can use it.

(1) First of all, check whether the surface of the vitrified brick has been waxed, if there is no waxing, it must be waxed again before construction. (2) During construction, the construction workers must be required to wrap the rubber hammer in white cloth before using it. Because of the poor antifouling performance of vitrified bricks, the brick skin is easy to be hammered and left black marks on the brick surface.

3) If it is a freshly paved floor tile, we should not walk on it, because the brick is not dry and solid, this is to avoid causing unevenness of the brick surface. (4) Freshly paved floor tiles, we must also use the tile packing box to cover the paved bricks, which is to prevent sand from grinding the surface of the bricks, as well as the paint or glue used in the decoration to drip on the top of the bricks, causing brick surface pollution. (5) Only after the completion of the whole decoration can you do a thorough cleaning, so that the usual maintenance will be easier.