Do bathroom walls need to be waterproofed? How does it work?

Updated on home 2024-07-05
7 answers
  1. Anonymous users2024-02-12

    The wall of the bathroom must be made waterproof, because in the bathroom we will often take a bath or wash, and the wall is particularly prone to moisture, so it must be made waterproof. The wall should be covered with a layer of ordinary paint, then a layer of waterproof paint, and finally a layer of sealing.

  2. Anonymous users2024-02-11

    It is necessary to do waterproofing, and the waterproof line should be designed, and the project management of the waterproof wall should be paid attention to, and the operation should be carried out after considering the waterproof problems.

  3. Anonymous users2024-02-10

    Of course, it is necessary to do waterproofing, you need to apply the entire wall with waterproof paint, and you can lay tiles on the wall.

  4. Anonymous users2024-02-09

    The bathroom is where we use the most water every day, so this is the center of our decoration, so many people are waterproof in the bathroom floor tiles that are tested for decoration, but the walls of the bathroom are also splashed with some water, and even moldy corners in the lower corners are often seen to take a bath due to water accumulation. Then,The walls of the bathroom must be waterproofedIs it? How to make bathroom wall waterproof?

    Because we usually wash the bathroom, the water in the bathroom often passes through splashing, and the soil penetrates the wall, if the wall is not waterproof, it will often cause a mold wall, and waterproofing is necessary.

    1. The floor is waterproof. First of all, the leveling is carried outThe walls of the sanitary nuclear mold room must be waterproofedCement mortar is used to level the floor and then waterproofed. This prevents leakage of the water-repellent coating due to uneven thickness.

    The soil is impermeable, and water does not penetrate the walls through the junction of the soil.

    2. The sutures should be brushed in place. The most problematic area is the joints in the connection between the bathroom wall and the upper and lower plumbing pipes and the floor. During construction, workers must be urged to work on these corners, so a water-repellent coating must be used.

    3. Waterproof wall treatment. In the general waterproofing treatment of the bathroom, a waterproof coating of about 30 cm is also required on the wallsThe walls of the bathroom must be waterproofedto prevent water from flowing through the walls. However, if the bathroom wall is a lightweight wall that does not support the load, the entire wall must be covered with waterproof paint.

    If you use a two-piece shower screen, you will have to paint the two associated walls. If a bathtub is used, the height of the water-repellent coating is 30 cm higher than the top edge of the bathtub. Sewers and yin and yang corners require some special waterproofing and clogging treatment.

    4. Waterproof test. After the construction of the bathroomThe walls of the bathroom must be waterproofedLock all the spouts in the bathroom and build a "can" 25 cm in the door, then fill the bath with water 20 cm long. After 24 hours, inspect the surrounding walls and floors for leaks.

    This 24-hour waterproofing test is the key to ensuring the quality of the bathroom waterproofing project.

    The above is about:The walls of the bathroom must be waterproofed

    You can get it for free

  5. Anonymous users2024-02-08

    Many people's bathroom walls at home need to do a good job of waterproofing, only the waterproof work is done, in order to ensure that the decoration effect of the bathroom wall can be to the most ideal point, does the bathroom wall need to be waterproof? If you want to do a good job of waterproofing the bathroom, you should also be clear about what you need to pay attention to when doing waterproofing in the bathroom?

    1. Does the bathroom wall need to be waterproof?

    The walls and floors of the bathroom need to be waterproofed.

    1. According to the relevant specifications and standards of national building decoration, the walls and floors of the bathroom also need to be waterproof. Among them, the wall waterproofing of the bathroom is: the waterproof height of the shower area is not less than 1 meter, the basin area is not less than 1 meter, and the other areas are 30 cm above the wall.

    Generally speaking, the waterproof height of the wall of the bathroom should be 1 meter in the shower area and 1 meter in other areas.

    2. After the bathroom is waterproofed, the tiles are not tight, but this is not right. After the waterproof layer is painted on the wall (acceptance), the wall is brushed with cement mortar, and then the tiles can be paved.

    Second, what should be paid attention to when making waterproofing in the bathroom?

    1. The bathroom is sliding and the floor is leveled first. If you're replacing the floor tiles in the bathroom, be sure to level the floor with cement mortar before waterproofing it after chiseling off the original tiles. It can avoid leakage due to uneven coating of waterproof materials.

    2. The seams should be painted in place. The joints between the walls and floors of the bathroom and the joints between the water and water pipes and the floor are prone to problems. During the construction, you must urge the workers to deal with these corners and corners, and you must ensure that the waterproof coating is applied in place.

    3. Wall treatment is also very important. In the general toilet waterproofing treatment, the wall should also be made about 30 cm high waterproof paint to prevent water from penetrating the wall. However, if the wall of the bathroom is a non-load-bearing lightweight wall, the entire wall should be coated with waterproof paint.

    If you have a two-fan shower screen in your home, the two walls that are connected to each other should also be fully painted. If you use a bathtub in your home, remember to apply waterproof paint higher than the bathtub on the wall adjacent to the bathtub.

    4. The waterproof test must be done. After the construction of the toilet is completed, block the sewer of the toilet and build a 25 cm high barrier at the door, and then pour 20 cm high water into the bathroom. After 24 o'clock, check the surrounding walls and floors for leakage.

    This 24-hour waterproof experiment is the key to ensuring the quality of the bathroom waterproof project, and this inspection must be done well.

    5. Keep the water smooth. The sewer pipes in the bathroom, including floor drains and sewer pipes for sanitary ware, must ensure that the water is unobstructed. Only in this way can we fundamentally avoid the tragedy of flooding the Seventh Army.

    Does the bathroom wall need to be waterproofed? The wall of Weixin Comedy Room needs to be waterproofed, so it is recommended to look more at how to do waterproofing to achieve the most ideal effect. What do I need to pay attention to when doing waterproofing in the bathroom?

    If you don't know how to do waterproofing, you should consult a professional for the ultimate secret of waterproofing.

  6. Anonymous users2024-02-07

    The waterproofing of the bathroom floor is very important because it can prevent wall corrosion or mold, many Hengwang people often complain about the problem of water leakage in their bathroom, this is because there is no waterproofing on the bathroom floor, because this position is always in contact with water, the key is waterproofing, then,Is it necessary to make the bathroom wall waterproof?

    Is it necessary to make the bathroom wall waterproof?

    Is it necessary to make the bathroom wall waterproof?- The relevant standards and specifications for decoration require that the bathroom wall is waterproof, and the bathroom wall is waterproof: the waterproof height of the shower area is not less than 1 meter, the water tank area is not less than 1 meter, and the distance between other areas is 30 cm to the wall, generally speaking, the waterproof height of the bathroom wall should be meters for the shower area and 1 meter for other areas.

    2. After applying the waterproof layer to the wall (acceptance acceptance), treat the surface of the wall with cement mortar, and then apply tiles.

    1. When the wall is waterproof, the waterproof layer should be located in front of the wall tiles, usually, when the wall is treated, the surface of the wall should be waterproof to a height of 30 cm, but the wall of the light body that does not bear the load must be waterproof, at least 60 cm high.

    2. Pay attention to the combination between the wall and the ground and between water and soil, which is a relatively easy problem, and workers should be urged to be cautious and must be coated with waterproof coatings.

    3. The shopkeeper should ask the decoration team to protect the upper and lower water pipes of the bathroom, brush off the waterproof coating 10 to 20 cm from the ground, and then add ester to the soil again, add the original waterproof layer to form a composite waterproof layer and improve the waterproofness.

    4. The grooves of the water pipes on the wall must also be waterproof.

    5. In some special locations, the wall adjacent to the shower position must be at least meters high, and if there is a bathtub in the bathroom, the height of the waterproof layer of the wall near the bathtub should also be higher than the upper edge of the bathtub.

    6. The wall surface is clean and flat, without floating ash and small particles, and when brushing with waterproof coating, the strengthened glass cloth layer is glued to 1 2 layers.

    7. You should be able to use the "water storage test" 24 hours a day to check and waterproof, once the wall waterproofing treatment works are completed, seal the doors and drains, fill the bathroom floor with water, reach a certain level of liquid, and make a mark.

    That is, we can see that forIs it necessary to make the bathroom wall waterproof?In addition, in the construction, it is necessary to understand certain aspects of the waterproofing construction technology of the bathroom posture wall.

    You can get it for free

  7. Anonymous users2024-02-06

    The bathroom does not need to be waterproofed on the wallsBathrooms must be waterproof! Not only is it waterproof, but especially the first floor is completely waterproof.

    First of all, the lower the floor, the more humid and easy it is for the air. Humidity is a killer of furniture, appliances, and everyday items that are twisted or aging rapidly. Secondly, he saidThe bathroom does not need to be waterproofed on the walls, which is a must because the first floor has a worse ventilation capacity than the other floors.

    Once the water overflows, it is difficult to dry. Therefore, it is necessary to do a good job of waterproofing the home. Waterproof locations include all-round toilets, waterproof kitchens, balcony waterproofing and room floor walls.

    Moreover, waterproof has a moisture-proof effect, and all-round waterproofing can be done.

    Bathroom: floors, corners and walls 50 cm high (180 cm high for the walls of the shower area), coated twice with a water-repellent coating;

    Kitchen: floors, corners, walls 30 cm high, coated with two layers of waterproofing coating;

    Balconies: the floors are coated with a waterproof coating twice;

    Floor walls: waterproof coating;

    The waterproof materials are commonly used cement-based waterproof coatings, such as: Leibangshi waterproof slurry; The two-way waterproof coating is applied in a cross shape.

    The bathroom does not need to be waterproofed on the wallsIt's a good idea to waterproof all walls to prevent water from seeping into the walls, causing water leaks and affecting next-door neighbors.

    After the water is discharged, the entire bathroom decoration can be in simple dark tones. The bathtub is separated from the sink by a rectangular doorway, which protects everyone's privacy and serves a good partition function. The floor of the room is made of gray marble tiles.

    The surface of the tile should not be smooth, even if water is splashed on it, it can also have a certain anti-slip effect. The walls around the room are covered with gray bricks to prevent water from seeping into the walls. A white bathtub can be installed in the corner.

    After a hard day's work, you can relax with a hot shower. Next to the bathtub can be a window from which you can enjoy a beautiful night view. There is a hanging painting on the wall, and the abstract painting can better reflect the owner's premature pursuit of artistic sense, and only by doing a good job of waterproofing can you enjoy life in this way.

    Tuba Rabbit** provides you with "each decoration**, 1-4 local decoration companies, 3 sets of decoration design plans" for everyone, as well as decoration pit avoidance strategies! Click on this link: Calendar [

    You can get it for free

Related questions
14 answers2024-07-05

Directly on the waterproof paint. And I personally recommend that in the shower room, a position with a lot of water, don't brush to a meter as required, and brush it directly to the top. Stay on the safe side.

8 answers2024-07-05

The first thing to do in the decoration of the new house is to make waterproof for the bathroom, this thing must not be forgotten, because if this is not done, it will bring you a lot of trouble in the later stage, our old house is because of the waterproof membrane is done, so the back always quarrels with the downstairs, because our home will always leak, I don't know what the reason is, and then I went to their house to see the water in our toilet, all of which leaked to their toilet, this is our full responsibility, so we need to be responsible for their maintenance. <> >>>More

27 answers2024-07-05

To must, when the rough house comes down, the real estate developer is waterproof, but their hydropower location is not in line with their own home, generally have to carry out hydropower transformation, in the hydropower transformation of the original waterproof layer destroyed, the bathroom water consumption, the environment is humid, so the waterproof division must do, the general shower place to do 1800mm, others to do 600mm from the ground, on it.

22 answers2024-07-05

Tile joints can effectively solve the problems of blackening, falling off, and peculiar smell between the gaps of ceramic tiles. >>>More

16 answers2024-07-05

1. If the wall is not waterproofed, you need to put the wall close to the root of the wall. >>>More