The glass glue in the bathroom is moldy, and the crevices are covered with mold, how should it be cl

1. Toilet cleaner.

We can use a more commonly used toilet cleaner, which can effectively remove stains. Therefore, you'd better spray a little detergent on the glass glue and then scrape the glass glue with a brush. General stains can basically be removed.

If the stain is too difficult to treat, we can scrape it off with a knife on top of the glass glue. This glass glue can usually be scooped up with a knife. However, be careful when shaving.

After all, the knife is sharp. If you're not careful, it's easy to hurt yourself. When using a knife, be sure to brace yourself.

There are relatively many glass glue bacteria on the toilet, and it is very dirty. At this point, it is better to clean the surface with a toilet bowl cleaner and then scrape it off with a knife, which will be cleaner.

Disinfectant. 84 disinfectant can quickly remove black mold from the surface of glass glue. The method is to fill the towel with 84 disinfectant, put it on the glass glue that needs to be removed, take it out for about 1 minute, wipe the surface of the glass glue with a towel, and basically remove the mold with 84 disinfectant.

3. Anti-mildew glass glue.

In order to prevent the glass glue from mold, we can choose a popular glass glue to prevent mold. When we apply glass glue to a previously cleaned place, it is necessary to fill the original place when applying the glue to prevent the invasion of air and bacteria from affecting its use effect. We can also choose some materials to repair when using, which can also make the bathroom very beautiful and tidy.

Plastic steel mud replaces glass glue

The construction method of plastic steel paste is relatively simple. We buy back plastic steel paste, which can directly fill the gaps and make them smooth with special tools. The plastic steel paste decorative seam will not be black and yellow, and the waterproof ability is particularly strong, mainly because it has a strong antioxidant capacity, so it will not change color during use.

It is stronger and more practical than ordinary glass glue. Smart people use this material in renovations, saving money and money, and it will not change for 20 years. Friends who are interested in decorating can try to buy this material.

After all, plastic steel pulp has a good reputation, and those who have used it have unanimously praised it.

Use a toothbrush to remove the mold, and then use a soft cloth dipped in alcohol or toothpaste to wipe the gaps clean.

If the moldy cracks in the glass of the bathroom are long, it is best to scald the mold with boiling water, first scald off the mold, and then dry it with a hair dryer, so that it is not easy to mold again if it is kept dry.

It can be cleaned with clean water, or with a brush, or it can be re-applied with glass glue, which can solve the problem of mold.

1.Clean with soap and steel wool, and if possible, you can use an electric toothbrush with a discarded brush head. You can use anti-mold gel, toilet cleaner, 84 disinfectant, bleach, and the active ingredient is sodium hypochlorite (bleaching).

2.When the brush can't be brushed, it means that the mold has grown into the inside of the glass glue, and you can consider shoveling off the heavy glue. Use a utility knife to scrape off the old glass glue, and the blade is drawn against the plane, scraping off the moldy area as much as possible.

How to glue:

1.Use the left and right stripes of masking paper to stick on the surface to be glued to ensure the beauty of the glass glue.

2.The glass glue is installed on the glue gun according to the instructions, and the pointed mouth of the glass glue needs to be opened by itself.

3.The sharp mouth is against the surface of the glass glue, squeeze it slowly, and the glass glue is beaten from far to near, from top to bottom.

4.Protected by masking paper, it doesn't matter if it is skewed, but the pointed mouth is as close to the surface as possible to avoid the glass glue hanging in the air.

5.Good glass glue dries quickly, tear off the masking paper after gluing, and be careful that the edges of the glass glue are torn by the masking paper.

6.It takes two or three days to dry, but press it with your hand and feel that the inside of the glass glue has solidified and you can use it, just be careful not to get wet.

I don't know if you have encountered such a situation, such as the cabinet countertop for a long time, the glass glue at the corner of the shade shows signs of mold, a little black spot is very troublesome, and the general wipe can not be treated, today I will briefly share with you how to deal with it more beautifully.

First of all, wash the mold, ordinary mold with a hard brush or steel wool ball, mold gel or toilet cleaning also have a good effect. Secondly, after the decoration, use waterproof and mildew-proof stickers to protect the corners and wall joints, and there are many molds and then replace them with new ones, which is easy to operate. Finally, dilute alcohol or caustic soda with water and apply it, and wipe it off after a while.

You can buy a mold removal gel, you can clean the moldy area very clean, and then pay attention to regular cleaning in the future.

Vinegar can be used to eliminate these moldy conditions, and the effect is also very good, vinegar can also have a desolubilizing effect.

Although the toilet is not large, it is very susceptible to dampness and mold. Especially in spring, when you go back to the south, there are many cloudy and rainy days, and it is easy to get moldy, and it is very difficult to clean every time. So what are the key points to pay attention to when cleaning the bathroom, so that the bathroom can become clean and bright?

As the saying goes, it is useless to treat the symptoms but not the root cause. We need to think about these issues seriouslySource

First:For example, the bathroom at home is not ventilated, for example, the bathroom has no windows, or the windows are closed all year round and are not ventilated, which is easy to breed bacteria and mildew. Second:

The moisture in the bathroom is too heavy, and the moisture in the bathroom is not dealt with in time after taking a bath, and the floor, tile and wall are covered with water vapor, which is more likely to lead to mold and mildew. Third:There are always water stains in the cracks of the sink and bathroom cabinet and they are not cleaned in time, resulting in the growth of mold in the gaps.

After understanding the source of mold in the bathroom, we can do a good job of ventilation every day, wash water stains frequently, and keep the ventilation and dryness of the bathroom to avoid the growth of mold in the bathroom.

In the pairThe inside of the toiletWhen cleaning, you can spread paper towels on the dirt inside the toilet, spray it with a thick baking soda and let it stand, then rinse off the paper towel or throw it away the next day, brush it and then pour in black soap to remove the smell. WhileToilet outsideTo clean it, spray some vinegar on the outside of the toilet bowl and the lid of the water tank, and then wipe the outside of the water tank and the base with a rag. Toilet tile crevices are the most prone to mold, you can use toothbrushes, stiff brushes and other tools to brush horizontally and vertically respectively to deal with dirt and bacteria in narrow crevices.

If the mold is severe, dip the paper towel in bleach first, and apply a wet compress for 1-2 hours to clean better.

The commonly used handwashing station is easy to produce scale due to stagnant water, wipe it with a rag dipped in weakly acidic vinegar, or through the principle of acid-base neutralization, remove the alkaline scale on the countertop and mirror, and finally rinse with clean water, pay attention to wipe it with a dry cloth immediately after cleaning to keep it dry. Faucets and drains are particularly prone to serious scale, first wet compress with detergent or white vinegar for 1 hour, and then with a toothbrush or technology sponge for detailed cleaning, in addition, if there is baking soda powder at home, or leftover toothpaste, apply it to the faucet and then brush, it can also effectively remove the tenacious scale, so that the faucet immediately shines.

If there is mold in the bathroom, you can choose to use the toilet cleaner to clean it, and you can choose to use 84 disinfectant or anti-mildew glass glue; To prevent the growth of mold again, it is necessary to ventilate frequently, and also to wash frequently, and clean up the toilet from stagnant water, so that the bathroom will remain fresh and clean.

When the bathroom is full of mold, you can use some special detergents to clean it; At the same time, pay attention to ventilation to keep the bathroom dry.

The bathroom of the family is the most likely to become a sanitary dead corner, and if you want to remove mold in these corners, you should use a special brush. Try to clean it regularly.

Clean the vanity basin and the wall between the glass glue mold, with.

Methods and steps for cleaning toilet cleaner or oxalic acid (illustrated with toilet cleaner as an example):

1.Use a little toilet cleaner, drop on the stained area, the stain will blister, leave for 1-2 minutes.

2.Use a small brush to lightly brush the stain. Where the stain does not come off, put some toilet cleaners.

3.Rinse off with clean water.

Note: Wear gloves when working, do not let the toilet cleaner touch ** or clothing, the toilet cleaner has a corrosive effect.

How to keep the glass glue between the wash basin and the wall from mold: Every time you use the wash basin, wipe the glass glue between the wash basin and the wall clean by the way, so that it is dry and clean, and it will not become moldy.

There is no good way to clean up the mold, and it is best not to use this material. It is better to use plastic steel clay.

Because you are not using anti-mold glass glue, you can use a knife to dig it out and re-apply it with new glass glue.

The cleaning method of glass glue mold is:

1. Preparation stage:

1. Tools: brushes, floor mops, towels, watering cans, plastic buckets, spoons, measuring cups, masks, rubber gloves, plastic aprons, eye shields, etc.

2. Solution: bleach water, water.

Second, the cleaning process:

1. Preparation of bleach: The preparation of bleach mainly requires sodium hypochlorite solution. It is calculated based on the concentration of sodium hypochlorite in the bleach. The method of adjusting the bleach is as follows:

1) 1:99 diluted household bleach (mix 10ml of bleach with 1L of water) for general household cleaning.

2) 1:49 diluted household bleach (10ml of bleach mixed with litres of water) to disinfect surfaces or objects contaminated with vomitus, excreta, secretions or blood.

2. Calculate the amount of bleach: if the concentration of sodium hypochlorite in the bleach used is higher or lower, the amount used should be adjusted accordingly.

Calculation: Bleach water volume multiple = sodium hypochlorite concentration of bleach. Use a spoon and measuring cup to accurately measure the amount of bleach you need.

3. Disinfection and bleaching: After disinfection, the items should be washed and dried with water. After disinfection, soak the cleaning utensils in diluted bleach for 30 minutes and rinse with clean water before reusing.

4. Wash your hands: Finally, wash your hands with liquid, and dry your hands with a clean towel or disposable paper towel.

High-tech glass anti-mildew powder and other products can be used, the specific method is: spray anti-mildew liquid on the surface of the glass first, and then use anti-mildew paper liner or anti-mildew powder to isolate, which can delay the glass mildew to the greatest extent.

I chose the wrong sealant for household use, and the inferior glass glue did not take long to become moldy, so we solved the problem from the root cause and used high-performance MS modified silane glue.

Silicone glue (commonly known as glass glue), the first generation of products silicone glue

The second generation of polyurethane industrial glue

The third generation product is polyether modified silane glue (MS glue).

The quality of many silicone adhesives on the market is not good enough (the products of low-price competition in domestic rubber factories, adding mineral oil, white oil and other solvents, acting as a volume to lead to loose molecular structure, bacteria are easy to attach, mildew and blackening is the norm), and MS modified silane sealant optimizes the high strength performance of polyurethane and the high weather resistance of silicone, does not contain cyanate, fundamentally solves the release of harmful substances such as toluene and xylene, and the VOC content is based on zero value. The raw material comes from modified silane resin, a new generation of environmentally friendly sealant adhesive, solvent-free, isocyanic acid-free, odorless, and superior adhesion performance. No black and moldy, edged toilet shower room and kitchen cabinet baseboard, weather resistance up to 50 years.

Greenridge MS green environmental protection glue, can bear up to 30 kg per square centimeter. Strong weather resistance, the colloid itself will not produce bubbles, and can resist rain, snow, and ultraviolet rays. Long-term exposure to the harsh environment of the outdoors can effectively inhibit and avoid cracking, breakage, yellowing, mildew and degumming of the sealant.

Moreover, Greenridge MS glue has zero formaldehyde, zero isocyanate, solvent-free, non-toxic and tasteless, and the VOC emission is far lower than the national standard, which does not damage the environmental performance of the substrate. It has a wide range of adhesion to substrates, and most inorganic, metal, wood, concrete, ceramics, glass, stone, etc. have good adhesion properties.