How to make homemade square lanterns, how to make round lanterns

How to make a square lantern? The Mid-Autumn Festival lanterns will be eye-catching, have you ever thought of making a handmade square lantern for your baby? Teach you the basic elements of making a beautiful square lantern, and of course, you can add more square elements to make a personalized lantern.

How to make a square lantern.

Material preparation: rice paper, some wooden chopsticks, tape paper, rope, glue sticks, colored paper, fine thread.

Steps: The first step is to build a wooden frame composed of 12 chopsticks with the wooden chopsticks prepared in advance. You can make two squares first, and then use four chopsticks in the middle of the two directions as the four support pillars of the lantern.

It can be fixed with rope or tape, and remember to leave a little more edge for adjustment.

If it is tied with rope, remember to burn the knot after the braided rope is tied with fire to prevent it from falling apart.

In the second step, the four sides and bottom of the lantern are glued with five sheets of rice paper and glue.

The third step, the crucial step, is the decoration. Here we use stick figure drawings of small fish, which are then cut and pasted down as decorations. You can also stick stickers to your favorite characters, or use red paper cutouts. Finally, you can use a Chinese knot, which will be very beautiful.

Fourth, the four corners of the lantern are connected with a string to make a hanging rope that can be hung, and the lantern is ready.

Here's how to make a round lantern:

1. Prepare a red envelope, red needle and thread, and 1 piece of red rectangular paper; Use scissors to cut out red packets, the width of each one should be the same, and then cut out the vertical strips with patterns on both sides and throw them away, leaving a total of 12 vertical strips for later use.

2. Cut out the vertical strip of red rectangular paper, pay attention not to cut the top, and then roll up the cut rectangle, and the ear head is ready; Thread the tassel head with red thread and tie a knot at the top of about 4 cm to secure the lantern strip; Thread the 12 lantern strips in turn, tie the patterned side up and tie a knot at the top; Thread the lantern strips in turn with red threads, press them into a semicircle, and tie a knot at the top to fix them.

Thread the remaining red thread through the top lantern strip, leave about 10 cm of hanging thread on the lantern, tie the knot, and cut off the excess length, and the round lantern is ready.

Handmade round lantern practice 2:

1. First of all, we need to prepare the materials for making the lantern: paper cups, red threads, glue or double-sided tape, coloring pens or gouache and scissors.

2. Take out a prepared paper cup, and then use scissors to cut the paper cup evenly into strips of consistent size along the mouth to the bottom.

3. After cutting longitudinally, trim the edge of the cup mouth to ensure neatness and conciseness.

4. You can trim the strips of the cup body to ensure that the width of the strips is consistent, and try to cut the smooth and rectangular edge.

5. After pruning, bend the vertical strips to the inside one by one, and initially show the shape of the lantern.

6. Then, take out the other prepared paper cup and cut out the mouth part, leaving only the bottom of the cup about 2 cm.

7. Cut out uniform and firm strips of the same size from the bottom of the retained cup according to the cutting method of the previous paper cup.

8. At the bottom of the two paper cups, drill a small hole respectively and thread it with red thread.

9. Then glue the vertical strips of the two paper cups one by one, after the bonding is completed, the lantern is almost formed, and you can also use your creativity to add some other decorations.

Tools needed: cardboard, scissors, ruler, glue.

1. First prepare a piece of red paper.

2. Stick the double-sided tape on the upper and lower sides of the red paper.

3. Compare with a ruler and then use a knife to cut the red paper.

4. Rub glue on the top and bottom of another piece of red paper.

5. Glue the red paper on the glue.

6. Roll up the glued red paper.

7. Stick a strip of paper inside the lantern.

8. Such a good-looking handmade lantern is ready.

1. Preparation: beverage cans, knives, scissors.

2. This step will be a little dangerous, don't let children do it. Use a knife to cut off the inside of the mouth of the can.

3. Use a ruler and a knife to draw the length of the can's equal width and height.

Be careful to leave a part of the top and bottom of the can wall and do not scratch the head.

4. Then we use a knife to slowly cut each lane, if necessary, we can use a knife to cut the opening, and then use scissors to cut it, which will reduce some of the risk factors.

5. You can slowly push out the middle part by hand and bend them into a lantern shape.

After it was sorted out, a lantern was born.

Prepare two paper cups, a pair of scissors, and some double-sided tape and scotch tape.

First pick up a paper cup, then use scissors to cut off the rim of the cup, then put the cup upright, and use scissors to cut the cup into strips as the main body of the lantern, but do not cut to the bottom, the bottom of the cup needs to be retained. After cutting, take out another cup and cut the bottom of this cup with scissors.

Glue the opening of the main body of the cut lantern and the bottom of the freshly cut cup together with double-sided tape, and a lantern is roughly completed. Then use a stick or paper stick to make the handle of the lantern, and you can also dye the lantern in your favorite color, such as red, so that a lantern is complete.

1. Prepare materials: 1 piece of red and yellow drawing paper, 1 piece of safety scissors, 1 stapler, 1 white latex or glue stick, and 1 red hair root.

1. Production steps: Fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folded place.

2. Fold a small part of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler for teachers or parents. In order to make it easier for young children to operate, the stapler at this step can also be replaced with white latex or glue sticks.

3. Coat the two long sides of the cut red paper with white latex, and roll them up around the yellow straight tube as shown in the figure below.

4. Paste slender red paper strips to make lantern handles, and the colored paper lanterns are completed.

Second, cardboard lanterns.

Preparation: 4 sheets of red cardboard (slightly harder), 1 safety scissors, 1 stapler, 1 hair root, 1 white latex or glue stick.

1. Production steps: Cut each red cardboard into three small rectangles on average, and cut 4 cardboards into 12 small rectangles in total.

2. Fold the small rectangular cardboard in half along the horizontal and vertical directions.

3. Fold the four corners of the small rectangular cardboard along the folded line.

4. Fold 6 small rectangular cardboards according to steps 2 and 3. Take two folded cardboards, and help the children to nail the two upward corners along the creases with a stapler, and nail the six small rectangular cardboards in turn in the same way.

5. Fix the two corners of the same small rectangular cardboard with white latex, and then fix the other five cardboards in the same way, and half of the lantern is completed.

6. Take the remaining 6 small rectangular cardboards, and make the other half of the lantern as shown in steps 1 to 5.

8. Insert the hair root at one end of the lantern, in order to prevent the hair root from slipping off, the hair root inside the lantern can be bent into a ball, and the lantern is completed.

Tools: round glass, colored paper, ruler, pencil, scissors, double-sided tape, candle Steps: 1According to the height and circumference of the glass, cut the colored paper to the corresponding size, fold the colored paper in half, fold it again, and fold it to your preferred width.

2.Leave 2 cm on the top and bottom of the colored paper, cut it according to the fold line, and fold it in half at half of the height of the paper.

3.Use double-sided tape along the top and bottom of the glass, paste around, the top and bottom are also firmly attached, and finally light a candle and put it in the cup, and it's done.

The finished product looks like a picture:

It's very simple, two thick cardboard and two sheets of paper will do.

Prepare a few tough bamboo sticks, then tie them together with branches or plastic to make them into the shape of lanterns, and then paste them with lantern paper.

Lanterns, also known as lanterns, are an ancient traditional Chinese craft. Originated in the Western Han Dynasty more than 2,000 years ago, around the Lantern Festival on the fifteenth day of the first lunar month every year, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere.

Later, the lantern became a symbol of Chinese festivities. Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the kind:

Palace lanterns, yarn lanterns, chandeliers and so on. In terms of modeling, there are characters, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy.

Answer n09:13 How to make handmade lanterns Step 1, prepare a rectangular piece of handmade paper, fold the upper and lower sides of the paper at a distance of about 2 cm, handmade paper: Step 2, and then cut a vertical line in the middle area with a knife every 1 cm or so; Step 3: Glue the wide sides together with double-sided tape to form a cylinder, and press down to make the lantern look like Step 4, prepare a rectangular piece of handmade paper, apply a glue stick and stick it to one end of the lantern, cut out a thin strip of paper with scissorsStep 5, then glue a paper strip of equal width at the upper and lower ends of the lantern, prepare a small piece of paper, and fold the two ends; Step 6: Finally, apply a glue stick and stick it to the other end of the lantern, and tie the rope to a small strip of paper.

I'll sort it out for you later**.

The simple and beautiful handmade lanterns are as follows:

Materials required: utility knife, cardboard, adhesive tape.

1. Take a square piece of pink cardboard, as shown in the figure below

2. Cut into two rectangles, one large and one small, as shown in the figure below

3. Fold the left and right sides of the large rectangle inward, and then fold it in half, as shown in the figure below

4. Use scissors to cut out the appearance of the lantern, as shown in the figure below

5. Paste double-sided tape on both sides of the small rectangle, as shown in the figure below

6. Glue the part of the large rectangle folded inward, as shown in the figure below

7. Take a piece of blue paper and cut it into two long strips for decoration, as shown in the figure below

8. In this way, the handmade lantern is done, as shown in the figure below

The easiest way to make a handmade lantern is as follows:Tools: colored paper, ruler, knife, double-sided tape.

1. First prepare a rectangular piece of colored paper.

2. Use a ruler to draw a middle line on the colored paper.

<>4. Draw a straight line along the dot with a ruler.

5. Use a knife to cut the paper along the drawn middle line.

6. Cut out another long strip.

7. Continue to cut along the straight line, taking care not to draw at both ends.

8. Paste double-sided tape on both sides of the remaining colored paper.

9. Paste two pieces of colored paper together on both sides.

10. Glue the remaining part of the multi-round orange paper at the bottom with double-sided tape.

11. And glue the two ends together.

12. The shape of the lantern comes out.

13. Glue a long strip to the top of the lantern.

14. Beautiful handmade lanterns for elementary school students are made.

Supplementary information: The relatively simple shape of paper lanterns is a cube or cylinder, and it is best to choose bamboo branches or bamboo bark that can be bent to form a frame, and tie the connecting places with thin wires. If you can't find it, you can also use slender strips of cardboard and bamboo skewers for barbecue, which will lack firmness and flexibility, but they are also very good decoration for the interior.

Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. Originated in the Western Han Dynasty more than 2,100 years ago, around the Lantern Festival on the fifteenth day of the first lunar month every year, people hang red lanterns symbolizing the meaning of reunion to create a festive empty atmosphere.

1.First, glue 3 disposable chopsticks into a triangle.

2.Then paste the rice paper with white latex.

3.Continue to glue three disposable chopsticks to each of the three corners.

4.Next, prepare three pieces of rice paper and draw beautiful patterns with colored pens.

5.Finally, paste the drawn rice paper on the three surfaces, pay attention to cut a gap at the top of one of them, put on a rope, and put the light strip into it from the gap.