15 red envelope lantern practices, red envelope lantern practices

This year's Lantern Festival lanterns are really a feast for the eyes, and I found many ingenious lanterns carefully, and I can't help but be impressed by the wisdom of the masses!

Red envelope lanterns. Materials needed: 13 old red packets, stapler, scissors.

Step 2: Fold the other 11 red packets in the same way.

Step 3: Align the two corners of the two red packets and secure them with a stapler.

Step 4: Repeat the steps above and book in groups of four.

Step 5: Arrange the 3 sets of red packets in the shape of lanterns and fix them.

Step 6: Use scissors to cut out the last red envelope with the same thickness as a tassel, pay attention not to cut one end, roll it up and fix it.

Step 7: Wrap it in a red rope and run it through the lantern and you're done.

2.Corrugated lanterns.

This colorful little lantern is super simple, and it is clear at a glance when you look at it**!

Draw a circle with a compass, make a total of 16 discs of different colors, and fold them in half. Prepare a rectangular piece of paper, the width is more than the diameter of the disc, glue the discs one by one, and then roll up the rectangular paper and glue the ends together. Cut some yellow strips of paper as the tassels at the bottom, and then cut a total of strips of paper as the handle of the lantern, super simple and wooden!

3.Chopsticks lanterns.

The load times out, click Retry.

Materials needed: 30 disposable chopsticks, electronic candles, colored paper, double-sided tape, red string, Chinese knots.

Step 1: Use disposable chopsticks to form a square, and fix the joints with glue. Take 4 more chopsticks and glue them vertically to the inner corner of the square to connect the upper and lower layers.

Finally, two chopsticks are crossed and glued to the inside of the square, so that the skeleton part of the lantern is completed.

Step 2: Wrap the sides of the skeleton with a long piece of colored paper and fix it with glue to act as a lantern cover.

Step 3: Tie the red rope in the middle of the upper end, hang a Chinese knot at the bottom, and hang an electronic candle inside, so that a complete chopstick lantern is completed.

How to make 15 red envelope lanterns? Don't throw away the red envelopes that have been opened, we can collect them and make a beautiful lantern.

Tool raw material red packet envelope.

Method: Read step by step.

Prepare 12 red envelope envelopes and fold the red envelope seals.

Fold the midline in half along the long and short sides, don't fold the two corners up and the two corners down.

For example, prepare 12 red packets and use a stapler to staple the two upward corners together.

Bend the two corners of the same red packet and tie them together, and the upper part of the lantern is completed.

The practice of the red envelope lantern is as follows:

You need to prepare a few new red envelopes, and the number depends on the size of the lantern you make. First, fold the four corners of the red envelope towards the midline, and note that the folded parts of the four corners should be the same. Remember to take out two of the red packets and punch a hole in each with a hole punch at the top.

Assemble the punched red envelope and the other two red envelopes into a cross shape, and use a stapler to nail the four corners firmly.

Then pass the two ends of the red rope through the hole, tie the dead knot, and make the rope of the lantern. Then use four red envelopes and nail them in a circle along the corners to make the upper part of the lantern. And make the lower half of the lantern and wear a Chinese knot as a decoration.

Assemble the upper and lower parts together and use a stapler to nail them along the corners. Arrange the edges and stitches, hang the thread at the top end on the hook, and the red envelope lantern is done.

Precautions for hanging lanterns:

1. The red lantern must be symmetrical, and the height and distance should be moderate.

2. The New Year's lanterns are hung in the south and not in the north. Many people hang lanterns because they are beautiful to hang there, but in fact, the direction of hanging lanterns is also particular. New Year's lanterns are hung in the south and not in the north.

3. The red lanterns hung must be even numbered, whether they are hung on both sides of the gate or on the balcony, they must be counted as even numbers. Hanging lanterns must be in pairs, and Chinese like even numbers.

The practice of red envelope lanterns:Tools Raw materials: red envelopes, scissors, double-sided tape.

1. First cut the red envelope into two parts.

2. Take the side with less pattern to cut off the double creases, and then cut off the excess on the covered side, do not throw the small thin strips cut, and finally make a small handle for the lantern.

3. Make a 1cm mark on both sides of the other side, fold the two long sides, and then divide the middle into a width of 1cm, and mark them all.

4. Next, we use a ruler and a utility knife to cut the paper one by one along the horizontal marking line, but remember not to cut the pasted edge, and then glue the long side of the other paper with double-sided tape.

5. Glue the two pieces of paper on top of each other, so that the prototype of the small lantern is made.

6. Next, make a handle and a pendant with red wool and fix them on thin strips of paper.

7. Fix the handle and pendant made of red wool on both ends of the lantern, so that it is more perfect.

8. Complete the above steps in order, and the red envelope will become a beautiful red lantern, delicate and cute.

Here's how to make a lantern with 5 red envelopes:Tools: red envelope, stapler, Chinese knotted rope, double-sided tape, cardboard, scissors.

1. Fold both sides of the red envelope in half to form a cross mark.

2. Use a ruler to align the midpoint on both sides to press the corners inward, and take the same folding method for the four corners.

3. Fold the five red envelopes in the same way.

4. First fix the corners of the two red envelopes with a book counter.

5. Then align the crease line of the hypertonic red envelope red envelope in turn, leaving the last side unbooked.

6. Then fold the middle of the red envelope outward and bind the adjacent corners with a stapler, and bind them in the same way.

7. Now cut a section of 6cm*10cm red cardboard, cut the bottom into a slender strip and leave 2cm on the top without cutting. Take a 30cm long piece of Chinese knotted rope and align the ends to tie a knot.

8. Paste double-sided tape on the cut red card and wrap it on the red Chinese knot rope head.

9. Tie a knot at 3cm below the finished flow comb and insert it into the middle of the lantern, tie a knot on top of the Chinese knot, and then tie the final seal with a stapler.

The red envelope lantern practice is as follows:

1.First, take a red envelope and fold it along the horizontal and vertical midlines.

2.Then fold it so that a cross-shaped cross line forms on the red packet, and then fold it from near the midpoint of the narrow side of each side to the midpoint of the long side of each side (white dotted line).

3.After continuing to fold, the red packet turns into a hexagonal shape in the shape of a shuttle.

4.Then fold all 6 red packets in the same way, and the shape and size of the folded ones should be the same.

5.Then apply double-sided tape to the folded part of each red packet bag, and then glue the same end and both sides of the red packet together.

6.Continue to glue the 6 red packets in a circle, remember to stick them together at the same end and in the same direction, so that the red packets are in a circle, and glue the other end of the red packet in the same way.

7.Then use scissors to cut out a suitable length of wool thread, prepare the handle for making lanterns, and use scotch tape to glue both ends of the yarn to the inside of the opening at the same end of the lantern.

8.Finally, prepare a string of beads and fasten it to the bottom of the lantern with a needle and thread.

Repeat the above steps to complete the lantern red envelope.

The tutorial on how to make lanterns in red envelopes is as follows:

1. First of all, we need to prepare some unwanted red envelopes, then cut off the top seal with scissors, and then use a utility knife to open the three edges of the red envelope.

2. A complete red envelope, we can divide it into two pieces, then we need to take the back of the red envelope, and then use scissors to cut off a part of its edge, which is about a centimeter wide.

3. Then we need to take out the side of the red envelope with letters, prepare a pen and ruler, and then draw a one-centimeter-wide line on the left and right sides of the red envelope, and the inside is an equal part of millimeters.

4. According to this method, after the red envelope is prepared, when the lines are cut later, it will become very uniform and straight.

5. After dividing the red envelope, we also need to use a manual knife to cut it according to the divided thin line. After all the red envelopes are divided, then we need to prepare an appropriate amount of double-sided tape, and glue double-sided tape to the places one centimeter wide on the left and right sides of the red envelope shell.

6. After the side of the red envelope with letters is ready, then we need to put it bottom down and glue it to the surface of the bottom of the red envelope to make the two sides of the red envelope mixed into one side.

7. After gluing the red envelope, we have to cut off part of its left side, and then glue double-sided tape to its bottom respectively, and glue them together, and the bottom of the red lantern is completed.

8. Prepare the bottom of the lantern, and then we have to prepare a scrap edge that has just been cut, fold it together, and then glue it to the top of the red lantern, a complete red lantern, and it is finished.