What is a blade lock? How do you open a blade lock?

A blade lock is a cylindrical lock that uses a reed as a shoji, which is a neatly arranged, dense blade.

Opening of the blade lock:

When the key is inserted into the lock cylinder, if all the key teeth on the key coincide with the grade difference of the blade, then the notch on all the leaves in the lock cylinder forms a straight groove, the movable pin in the lock cylinder will fall into the groove under the action of elastic force, and the movable pin in the middle shell will also fall, and the groove part that comes out of the shell slides into the blade groove in the lock cylinder, and then the key is rotated, and the key will drive the lock cylinder.

The lock cylinder drives the middle shell to rotate together, and the transmission structure connected to the middle shell also rotates at the same time, so that the door lock can be opened and closed.

The blade lock is currently a relatively secure C-level lock cylinder, which is more difficult to open, and can be opened with this tool in the figure below.

Ben has**.

The blade lock is a relatively safe cylinder that can be opened with the tools I have here. Remember to look, my name.

Summary. Hello dear, happy to answer for you! Blade lock unlocking new skills 10 seconds to unlock the lock with a sleeve opening method, first use the don't lock, pay attention not to top to the spring, and at the same time the hand should move left and right, can not si.

Fork into the tool left and right depth of the test, do not stop when the word is changed, change the tool in turn until the 5 tools are tried. If it can't be opened, use two tools to overlap and insert the lock body together. Rotate two tools at the same time to achieve a change in tooth position, and 5 tools in turn from stack reversal to achieve a large tooth position change.

Blade lock unlocking new tricks 10 seconds unlocking.

Can the anti-theft door blade lock be opened?

Hello dear, happy to answer for you! The new trick of opening the blade lock in the middle of the trough 10 seconds to unlock the lock with a sleeve opening method, first use the don't lock it, pay attention not to top the spring, and at the same time the hand hall sail should move left and right, not si. Fork into the tool left and right depth of the test, don't stop when don't say the word, change the tool in turn until 5 tools try to finish Nianshan.

If it can't be opened, use two tools to overlap and insert the lock body together. Rotate two tools at the same time to achieve a change in tooth position, and 5 tools in turn from stack reversal to achieve a large tooth position change. <>

Kissing can be opened<>

Or you can buy a bottle of waterproof oil for repairing watches, pour it into the lock body, and pin the lock spring with a single hook, at this time the lock spring will be very slow. Because the oil is sticky, the force of the lock spring against the anti-Dan is partially blocked. At this time, don't use a single hook to pat regret, use a multi-tooth hook to quickly point the teeth, and at the same time shake the other child.

This is a relatively fast way to open the blade lock.

What kind of tools can be opened?

Personal screwdriver.

Professional locksmith tools for single-sided snake groove blade locks, repentance double-sided snake groove blade locks and multi-track snake groove blade locks. The tool is composed of a multi-functional claw hammer and a special screwdriver for opening the blade lock with high hardness.

That is, violence opens.

Yes. No technology open.

The technology they say on the Internet is okay, but it's all a lie.

You can try to press the lock spring with a single hook first, and you should be able to find out the approximate position of the ** gap in the sail pie. Then pin the pin, and then insert a thin feeler gauge into the lock body, to the top of the lock teeth. Note that the lock teeth are not separated from each other, but are not keyed.

At this time, the lock spring is clicked, and the lock spring does not come back. Note that the camer gauge should be the same as the key. Then use a single hook to point down the lock spring, and point it in the same order as the previously mastered tooth position.

Don't say that the potato sedan chair Zheng gently shakes from side to side, and the single hook should also be tapped, and it can be opened after a few more attempts.

We all know that by installing doors and door locks, it can help us protect our property and personal safety at home, especially when buying a new house and living in the community, the door lock at home is very important, and only the door lock is equipped with high security, which is more helpful to prevent theft. There are many kinds of door locks, there are AB locks and blade locks, many families are installed these two locks, I don't know if you have a detailed understanding of the blade lock, the following is an introduction to the blade lock for the majority of friends.

There is a difference between AB lock cylinder and blade lock cylinder, like aluminum, iron or even plastic AB lock with a single row of upper and lower bead structure, which is not only not precise, but also has a particularly high mutual opening rate, which cannot play an anti-theft role at all.

For the blade lock cylinder, this is the lock cylinder with the highest security at present, and the reason why it has higher anti-theft performance than the AB lock cylinder is because it adds an extra milling groove on the basis of the AB lock double-sided double-row marble, and it adopts the structure of the side post card lock, that is, the lock is made on the side. The focus of ordinary people picking locks is up and down, and such a lock cylinder takes about 270 minutes to open in the test of the public security department. This is the most basic difference between a blade lock cylinder and an AB lock cylinder.

Not all blade locks can be anti-theft, some imitation blade locks are very thin, the diameter of the beads is less than 2mm, such locks can be opened with tin foil and some professional tools.

Because the blade lock cylinder is made of blade anti-theft technology, the anti-theft performance is high, and it takes about 280 yuan to replace the blade lock cylinder for anti-theft doors of brands such as "Meixin" and "Wanjia". Sometimes, when carrying out preferential activities, about 250 yuan is enough. And the "Wang Li" anti-theft door, if you want to replace the blade lock cylinder, it is slightly more expensive, between 300 yuan and 350 yuan.

The lock cylinder of the blade lock adopts a springless blade structure, and the blade lock is easy to rotate freely within the rotation range of 90 degrees if the blade lock is subjected to strong vibration and impact, resulting in the key being unable to insert, so a plastic rod similar to the key is inserted in the blade lock lock hole when the safe and cabinet leave the factory to prevent the free rotation of the blade.

Through the comparison with AB locks, we should know the advantages of leaf locks, indeed, the anti-theft performance of leaf locks is very good, there are many families are using leaf locks, the user's response is very good, usually we are on TV or through friends around us, neighbors, may have heard that the door of the house was pried open, the property in the house was stolen, which also caused everyone's warning, the door lock at home is very important, we don't use those general locks, buy a *** door lock, even if there is no one at home, our Bi Xiao will also be very down-to-earth in his heart.

You can get it for free when you are a few years old