-
The brick surface is partially uneven, hollow, cracked, etc., and generally needs to be replaced. There are two ways to replace it: one is to carefully knock the tile to be replaced (note that the force should not be too large), and then pry the brick around, remove the brick that needs to be replaced, and repair it again.
If the brick is not pasted for a long time, the cement on the wall is not completely dry, you can carefully pry the cement off, paste it with cement slurry, if it is used for a long time, the cement is completely solidified, you can use special tile adhesive paste (tile adhesive is available in the major building materials market).
Another way is to use a marble machine (a tool specially used to cut tiles) along the diagonal line of the tile, be careful not to scratch the four corners of the tile, from the corner of ten centimeters, and then use a hammer to break the diagonal intersection point (in the middle of the tile), with a chisel from the middle to the surrounding pry, so that the surrounding tiles will not be damaged. After taking out the bricks, you can re-paste them.
Tips: The replacement of tiles needs to pay attention to their color number is consistent, otherwise there will be color difference, so it is recommended to leave a small amount of tiles when tiling for future repair. If you don't keep it, it's best to take the pry off tile fragments to the point of sale as they are**.
For the scratches on the tiles, the glazed tiles can be sanded with fine sandpaper and carefully sanded on the brick surface, which can get some effects. Be sure to do it with water. This method can get a good effect on small scratches on the brick surface.
Vitrified tiles can also be carried out using the above-mentioned glazed tile method. The force should not be too strong; You can also use a polishing machine to add water to polish to keep the strength even, which requires professional operation.
-
If you have a small area, you can use marble glue (available in building materials stores) to make up for it, and pay attention to the color of marble glue to be consistent with the color of the floor tiles.
-
Before repairing, it is necessary to clean the damaged area of the floor tile, and then protect the tiles in the surrounding intact area, so that it will not affect the tile repair. Then prepare the toning repair paste, which can generally be bought in the building materials market, and only the use of repair paste can treat the scratches well. Then the repair paste should be colored, and the color should be consistent with the floor tiles, so as not to affect the repair effect.
Related information: 1. After color mixing, fill the repair paste in the damaged part of the floor tile, when filling, it should be noted that the repair paste should be filled with all the scratches, and it should be evenly smeared, so that the cracks are also filled with repair paste, so as to ensure the repair effect.
2. After that, it is necessary to use professional equipment to quickly cure the repair paste, that is, to dry it, so that the grinding step can be carried out. After all the repair paste on the surface is dry, you can use sandpaper to polish the surface to fill the scratches with the repair paste to ensure a better repair effect.
3. Then start to color the surface, if you want the tile surface repair effect to be good, you must color the surface. Before coloring, you need to mix the paint to ensure that the color is consistent with the color of the floor tiles. Then it is necessary to glaze on the surface, and after the surface is cured, the glaze will be started to ensure the gloss of the surface.
4. No matter what kind of floor tiles, some lines will be designed on the surface, so after the glaze is finished on the surface, the lines should be painted on the surface, and a special brush can be used to draw them according to the texture of the tile surface, which can not only ensure the beauty, but also ensure consistency with other floor tiles.
-
1. If the surface of the floor tile is a small pit, you can use marble glue plus curing agent to repair, first clean up the small pit and its surroundings, and then apply jade glue reinforcing agent, fill the small pit, wait for it to dry thoroughly, and then use frosted paper to polish. 2. If there is a crack, you can use tile paste to cover it, clean the surface of the tile with the same coarseness, and then take an appropriate amount of tile paste to apply it, and wait for it to dry out. It is a crack in the town, you can use tile paste to cover, also clean the surface of the tile, and then take an appropriate amount of tile paste to apply, wait for it to dry.
3. If the damaged area is relatively large, the whole tile needs to be replaced, and the beauty joint around the tile needs to be scraped off before the change, and then the machine is used to cut along the tile diagonally, and the broken brick is taken out, and then the new tile is installed and filled with the seam. Understand the TV network
-
How to repair broken floor tiles
One. Remove caulking white cement along the edges of the tiles and carefully remove the damaged tiles with a small chisel. If the surrounding tiles are firmly pasted and you don't want to replace all the surrounding tiles, you can use a glass cutter to carve the middle of the tile, chisel the middle part of the tile first, and then use a sharper steel chisel to slowly repair the broken porcelain blocks around the edge.
Two. After the tile is chiseled off, the bottom cement mortar is chiseled off with a steel chisel, and the force must not be too heavy, otherwise it will shatter other intact tiles. After removing the dust, the surface should be moistened with water.
Three. Before pasting tiles, the tiles should be soaked in water and moistened, and after drying, a layer of 107 glue cement slurry should be thinly applied on the back of the tiles, and then pressurized in place vigorously, and check whether the newly pasted tiles are flush with the surrounding tiles.
Four. The joints of the newly pasted tiles should still be filled with white cement grout, and the excess cement grout should be removed from the tile surface.
Five. The old tiles are still intact, but they are disconnected from the joints, and the sand and ash at the joints should be removed and epoxy adhesive should be injected when repairing, and then the joints should be repaired with waterproof flexible caulking material (such as glass glue) after drying.
Six. Sometimes old tiles are broken only.
One or two pieces, and the original'Cement mortar is also difficult to chisel off or chisel hair. At this time, you have to use epoxy resin glue (all-purpose glue) to apply a thin layer on the back of the tile and the cement wall, and then press hard to ensure that the new tile is flush with the surrounding tiles. If the mortar is not loose, only the tile falls off, the mortar on the tile can be scraped clean, mixed with a little cement in 107 glue to form a paste, evenly coated with a thin layer on the back of the tile, and then pressed the tile to stick firmly.
If the mortar falls together with the tiles, first gently chisel some pits on the original foundation surface, re-inlay them with mortar mixed with 107 glue, and then press the falling tiles until the mortar hardens.
What do you need to pay attention to in the construction process of corundum wear-resistant flooring? >>>More
Don't be nervous, the Buddha is forgiving, if you blame you for breaking the Buddha statue unintentionally, then it is not the Buddha. >>>More
You ask the bank, if you can come up with a certificate to solve the problem, then it is better. As for the template of the certificate, you can go directly to the financial network to ask the **customer service for a copy. They'll send it to you for free.
Basketball court wooden floor anti-cracking method:
1. Reserve expansion joints. >>>More
Take the Buddha statue and repair it. Again.
The merit is great. >>>More