-
The phenomenon of ginseng ficus leaf loss caused by excessive watering is not easy to be too wet when watering, and the soil that is too wet is easy to accumulate water and cause root rot and yellow leaves fall. It is best to keep the soil dry and watered, so that it is not dry and watered, so that it is conducive to the growth of the root system and is not prone to leaf loss.
2: The soil board is hard and impermeable, and the water after watering cannot penetrate into the soil layer, resulting in most of the roots being unable to absorb water and nutrients, resulting in leaf water loss and nutrient loss, and the symptoms of yellow leaf leaf loss. The best way is to loosen the soil properly, so that the soil is loose, breathable, drainage, and conducive to root growth.
Three: If the potted plants planted indoors due to the lack of light have yellow leaf loss symptoms, it is best to put it in an indoor sunny and ventilated place to facilitate its photosynthesis to reduce the phenomenon of yellow leaf loss, and it is best to move out of the outdoor sun for 2 hours in the morning and evening to enhance photosynthesis.
Four: there are pests and diseases are also easy to cause leaf loss, it can be observed that if the leaves are caused by insect pests, insecticides can be used to kill insects, and if they are caused by fine yin, antibiotics can be used to treat the disease.
Five: Insufficient nutrients are also easy to cause yellow leaf leaf loss symptoms, dig holes on the side and bury compound fertilizer and mineral additives according to the amount, the amount is not easy to be too much to prevent fertilizer damage.
-
For now, if the leaves of a potted plant are yellowing due to lack of water, you can check to see if its roots have withered.
If it doesn't wither, prune all the cover leaves on it, then water it and add the nutrient solution slowly.
-
First of all, prepare a pair of scissors, and then use scissors to prune off all the old roots and some necrotic roots, and prune off those fragile roots, but after pruning, the new roots that grow must be preserved. And when pruning, you must not use too much force, so as not to damage the roots, and after pruning, you should also soak the roots in water, so as to avoid bacterial infection.
-
When pruning, be sure to trim according to the shape you like, and you can use the rope to tie it up first, trim the inside first, so that you can do a good shape, and when pruning, be sure to trim along the lines, do not prune against the reverse, and be sure to water more after pruning.
-
Useless or withered branches and leaves should be pruned off, and care should be taken to protect them after rest, and to pay attention to frequent watering and fertilization.
-
At this time, it is necessary to choose professional tools, and then choose to prune in the morning, when pruning, be sure to prune off some wilted or some slower growth branches and leaves, do not prune too much, and be sure to retain the roots.
-
Cultivation method of potted ginseng ficus:
1. Soil. In order to make the roots of the ginseng ficus large and fertile, a little fertilizer should be added, and a fertilizer with a high proportion of phosphorus and potassium fertilizer can be put in. When cultivating ginseng ficus, it is necessary to use seeds to sow seeds to raise fat roots.
2. Temperature. The best growth temperature of Ginseng Ficus is between 18 and 33 degrees Celsius, so you need to pay attention to sun protection and frost protection in winter and summer, especially in winter, the temperature should not be too low, otherwise the fallen leaves are small and may freeze to death.
3. Watering. Ginseng ficus can keep the potting soil slightly damp, but it must not accumulate water, and all flowers and plants cannot accumulate water, so the frequency of watering should be controlled, and watering should be repeated when the potting soil is dry (dry is not very dry, not to go to extremes).
4. Fertilization. Ginseng ficus does not like fertilizer, so a small amount of compound fertilizer (slow-release fertilizer) can be applied once per season. The main components of fertilizer are nitrogen, phosphorus and potassium, and the fertilizer should be applied 3 to 4 times a year, not excessively, otherwise it is easy to cause its branches and leaves to grow and destroy the composition of the plant.
5. Change the pot. Ginseng ficus can be repotted once every 2 years, the best time is before leaving the house in spring, pick up the soil around the pot, take out the huge root plants, pound off a part of the soil, and re-select fresh fertile, loose drainage, nutrient-rich cultivation soil to plant.
6. Pruning. At the same time of repotting, the branches and leaves were moderately pruned and adjusted to keep the plant shape good. When the soil is just changed, the watering should not be too much, and the temperature rises to more than 20, and then give normal water and fertilizer management.
Precautions. 1. The newly bought ginseng ficus needs to be adapted to a new environment, and it may also be newly planted by the merchant, so it is normal to lose leaves at the beginning, so after buying it home, take the pot first, and only consider the management methods such as sun exposure and fertilization after taking the pot.
2. Do not move the position of the ginseng banyan potted plant at will, after choosing the location, in addition to watering, or occasionally take care of it, do not take care of it three times a day.
3. Ginseng ficus should pay attention to ventilation, because it is resistant to semi-shade, so some flower friends are raised indoors, which leads to poor indoor air circulation, resulting in no vitality of ginseng ficus.
4. Ginseng ficus should pay attention to pruning, the reason why it is beautiful is because the tree shape is good, if it is not pruned for a long time, it will grow barren, and there is no ornamental value, so pruning is a must, and it can be carried out in the spring of each year.
-
In fact, most people know that when buying a potted plant at home, the first thing is to slow down the seedlings and put them in pots, so that the plants can grow normally after adapting to the environment at home.
Ginseng ficus is the same, when you just buy it home, you may drop the leaves, at this time, you can put it in the semi-shade for a period of time, and then wait until the pot is served and then the normal greeting is touched by the light, and the water and fertilizer management is carried out normally.
In fact, most of the potted plants bought home will be placed in a fixed position, and if the ginseng ficus chooses the location of the Zen shed for maintenance, it should not be moved often. It's okay to change it once in a while.
Ventilation is indispensable for cultivating plants. Nowadays, most of the cultivated ginseng ficus is maintained indoors, so that it will be in a closed tuber for a long time, the air is not smooth, and the ventilation is poor, which will produce a lot of growth problems, such as pests and diseases and leaf loss. Be sure to ventilate frequently.
In fact, the pruning of the ginseng ficus is mainly to maintain a good tree shape, if it is not pruned for a long time, the growth of the ginseng ficus will be more overflowing, and it will lose its ornamental value. Pruning is usually done in the spring.
In fact, the pests and diseases of ginseng ficus are still relatively rare, and there are occasional scale insects, which can be used to kill insects. In addition, there may be other problems due to delay, and it is necessary to choose a reasonable rescue method according to different symptoms.
-
1. Breeding environment: Cultivating ginseng and banyan bonsai should use nutrient-rich mixed soil and keep the temperature at about 25 degrees. 2. Water and fertilizer management
Water every 3 days during the growing season, once in the morning and once in the evening in the summer, and fertilize 3-4 times a year. 3. Precautions: Change the pot every 2 years, and stop fertilizing and watering the ginseng ficus after changing the pot.
1. Breeding environment
When cultivating ginseng banyan bonsai, it is necessary to use river sand, humus, and nutrient soil to prepare the base soil, and disinfect and sterilize the soil, and the plant likes warmth, and the ambient temperature should be maintained between 20-30 degrees, and above 30 degrees, ginseng ficus will have poor growth and wilting leaves.
2. Water and fertilizer management
During the growth period, the ginseng ficus bonsai should be watered 2-3 times a week to keep the potting soil moist, and the summer should be watered once a day in the morning and evening to improve the environmental humidity, and the ginseng ficus has a small demand for nutrients, and the fertilizer can be applied 3-4 times a year, mainly nitrogen fertilizer, phosphorus and potassium fertilizer, so that the plant can absorb balanced nutrition.
3. Precautions
When the ginseng banyan tree is cultivated in bonsai, the growth space of the plant is limited, at this time, the pot can be changed every 2 years, the ginseng banyan tree is dug out of the original soil, the aging and dry roots are cut off, and then planted in the new potting soil, and it should be placed in a cool place for maintenance after planting, and the watering and fertilization should be stopped.
-
1. Sufficient light: it likes to be semi-shaded, and if you want it to grow vigorously, you should bask in more scattered light, and block it in time when the light is strong to avoid exposure. Especially in the summer when the light is strong.
2. Suitable temperature: It likes to grow in an environment between 18 degrees and 33 degrees, and is not resistant to high temperature or cold. When there is a high temperature in summer and a low temperature in winter, the temperature should be controlled in time. In summer, it is necessary to ventilate more and avoid light. In winter, when the temperature is low, it should be moved indoors and insulated.
3. Appropriate amount of watering: You don't need to water too often, and you have drought tolerance. When you find that the potting soil is dry, you can water it again, let the soil be slightly moist, and be careful not to accumulate water.
4. Suitable soil: The soil should be slightly acidic, and it should be breathable, fertile and loose. When maintaining, you can mix river sand, cinder and humus, and it is best to add an appropriate amount of fertilizer as a base fertilizer, so that you can grow vigorously.
It needs more nutrients to grow, and it needs to be fertilized frequently. Homemade fertilizer can be made, and diluted aspirin tablets can be poured on the roots to promote thicker roots. Indoor maintenance should be more ventilated, and the root system will grow larger if the ventilation environment is good.
In addition, the exposed roots should be covered with soil, so that the roots can also be nourished.
-
Because it is placed at home as a bonsai ornament, the aesthetics are very important, to be able to coordinate with the overall feeling of the plant, the color can be plain, so that it can bring out the green and bright of the plant, it looks more elegant, there are no excessive requirements in the shape, round or rectangular are OK.
It is best to choose purple sand pots in the material of flower pots, which can not only be breathable, but also beautiful, but expensive, and then you can choose clay pots or clay pots, both of which can ensure good permeability, not to produce problems such as water accumulation, and can have a certain guarantee for the growth of plants.
There are no too many requirements for the depth of the pot, the plant has just begun to be maintained, if it is smaller, you can choose a shallow pot, so that it will not be because of the amount of watering, there will be accumulation, and the evaporation can be faster, which is conducive to the breathing of the root system. If the tree grows upwards, you can use shallow pots, which can bring out the tall feeling of the plant through the pots. If the root is very beautiful and good-looking, you can use a shallower one, which can ensure the degree of beauty, and if the root is not good-looking, you can use a deeper one.
-
Cultivation method of ginseng banyan bonsai:
1. Soil: Ginseng banyan bonsai is relatively robust, because the requirements for the substrate are not very high, and ordinary flower soil can be used generally. If the conditions are better, the acidic sandy loam soil with loose and fertile, good drainage and rich organic matter is selected.
If alkaline soil is used, it is easy to make the leaves of the plant turn yellow, and the plant will not grow well.
2. Light: Ginseng banyan bonsai is more light-loving, but also tolerant to semi-shade. It is best to maintain it in an environment with sufficient scattered light, and pay attention to shading when there is strong light.
-
Ficus ginseng can be cultivated in sandy soil, put phosphorus and potassium fertilizer into the soil, and change the pot every 2 years. The optimal growing temperature is between 18 and 33 degrees Celsius, and in winter it is important to keep warm and above 10 degrees Celsius. During the breeding period, it must be reasonably watered, keep the potting soil slightly damp, watering to see dry and wet, it does not like fertilizer, fertilize 3-4 times a year.
The growth of ginseng ficus needs to be reasonably exposed to light, and it should be kept in a sunny place in spring and autumn, and avoid direct light in summer.
-
The banyan tree should be cultivated with sandy soil, and it should be watered reasonably when planting the ginseng banyan tree, and the soil in the pot should be kept moist. Regarding watering fertilizer, it is enough to water the banyan tree 2 or 3 times a year.
-
In winter, the temperature of the shed should be maintained at least 5; The cultivation soil is required to be loose and fertile, well-drained, rich in organic matter, acidic reaction of sandy loam, during the growth period, the water is required to be sufficient, should be wet but not dry, always keep the potting soil moist, keep the light sufficient, and sprinkle water on the foliage.
-
1. Soil. Ficus ginseng prefers loose, breathable, nutrient-rich soil. Attachment to the 1:2:2 ratio of garden soil, river sand, and humus used when changing pots, such a substrate can make the ginseng ficus grow better.
2. Sunlight. Ginseng ficus likes warm light but avoids strong light, the temperature of the attached terrace is high, I put it under a taller plant to scatter light maintenance, avoid direct sunlight, especially in summer, must avoid light maintenance.
3. Temperature. Ginseng fig prefers a warm environment and grows well at a temperature of 15-33 degrees. If it is too hot in summer, it must be shaded. In winter, move back indoors to avoid frostbite, and it is best to place it on the south balcony to give full light.
4. Watering. Ginseng ficus likes water and is also afraid of waterlogging, and the surface of the small pot pot soil is slightly moist to give water. For larger pots, the surface of the potting soil is white and dry, or the pot can be lifted to feel slightly lighter.
Don't water when you're fine, most plants are watered, that's true, so whatever the plant, keep your hands on it.
Beautiful ** Banyan, do you know how to breed, let's learn with Xiao Kai.
Daily maintenance methods:
1. Watering: During the breeding period, it is necessary to give water in time after the cultivator dries out, and there can be no shortage of water in spring and autumn. The rising temperature in summer will speed up the evaporation of water, and watering can be done more appropriately, but in winter it is necessary to control the water. >>>More
People are asking about aquatic plants, peppers, and ficus. This one actually made chili peppers. Really.
Because the banyan tree is a positive species, your ficus microphylla loses its leaves, first, when you see less sunlight, you have to move it outside the house to see the sun more, it is not too afraid of the sun; Second, there may be too much watering, you should water thoroughly at one time, don't water half-watered. That's all for now. If not, I'll tell you more.
Large-leaved ficus has the following main functions in the fish tank: >>>More