Can the happy tree that has just been transplanted in winter be pruned, and how to deal with the cut

When the tree of happiness hurts the roots, it is necessary to depot in time and use sterilized scissors to cut off the injured roots. After pruning the root system, it is necessary to soak it with carbendazim solution, and put it in a cool and ventilated place to dry the roots. After repotting, don't water it too much, just water it when the soil is dry.

1. How to deal with the injured roots of the happiness tree.

After the root system of the happy tree is injured, it needs to be depotted in time, cut off the root system in a bad state with sterilized scissors, and then soak it with carbendazim solution for disinfection treatment, and then need to dry its wound in a cool and ventilated position, so as to avoid the root system rotting after the plant is potted. In a short period of time after changing the pot, it is necessary to water it after 3-4 days, because the soil in the pot generally has a certain humidity, and if it is too wet, it will affect its growth, and if you water too much, the absorption capacity of the root system has not been restored, and it is easy to rot the roots.

Second, how to raise a tree of happiness to flourish.

1. Light: Happiness trees like to grow in a sunny growth environment, except in summer, they can receive all-day sunshine. In summer, you can use a black shade net to block some of the sunlight, or you can move it directly to a place where the light is astigmatized indoors.

2. Temperature: The best growth environment temperature of the Happy Tree is between 18-28 degrees, which is the most suitable for its growth. If the temperature of the maintenance environment exceeds 35 degrees or is lower than 5 degrees, it will affect the normal growth of the plant, and it needs to be maintained in a hidden and ventilated position in summer, and moved to a warm place indoors in advance in winter to avoid frostbite.

3. Watering: A humid growth environment is more suitable for its growth, and it is best to ensure that the soil is slightly moist every day, and watering follows the principle of dry and thorough watering. After the temperature drops in winter, you need to control the amount of watering, too many plants cannot absorb it, and it is easy to have root rot.

Trees of happiness that have just been transplanted in winter can be pruned. Pruning is usually done in summer and winter, with the summer pruning taking place in July, when the plant grows faster and the tree recovers well after pruning. Winter pruning is in December, when the temperature is cooler, and it can be pruned properly, but it should not be cut too hard.

If the temperature is not too low, of course, you can trim it, and the cut notch must be painted or brushed with special antifreeze.

It is best not to prune the happy tree that has just been transplanted in winter, because it has not yet grown new roots and cannot absorb water and nutrients, so if you go to prune again. It can easily lead to non-survival.

It is best not to prune the happy tree that has just been transplanted in winter, cut off the gaps, and if the temperature is low, you can cover and wrap it with plastic film.

Don't transplant the happy tree in winter, because in winter, as usual, the growth is relatively slow, if you transplant, he has a slow seedling process, if you do not operate well in this process, it is likely that the roots will not grow or rot, so do not choose to transplant in winter.

Happiness tree scientific name bean tree, very easy to raise flowers, many flower friends are planting it at home, and the breeding is very good, but do not know how to prune a single happy tree, in fact, there are many kinds of pruning methods for the fortune tree, you can prune diseased branches, old branches, main stems, side branches, trowels and other places, which will make the fortune tree get more abundant nutrition, in the process of breeding, we must pay attention to the environmental temperature, and watering and fertilization.

Can a happy tree that has just been transplanted in winter be pruned? What to do with the cut notch?

First of all, the transplanted happiness tree can be pruned, even if it is transplanted with soil balls, it will naturally wither part of it, and the happiness tree is easy to lose its leaves, especially if you change the environment, or the temperature changes suddenly!

Pruning off some of the branches by yourself can also reduce the waste of nutrients, because the roots are damaged after transplanting, and basically cannot absorb the nutrients needed by the original plant!

In winter, the cut-off generally does not need to be treated, because the winter is dry and the temperature is low, the cut-off is dry in a short time, and there are basically no bacteria to multiply!

However, if it is in a greenhouse and the air humidity is relatively high, you can also spray some fungicides!

In winter, the climate is cold and dry, it is best not to prune, wait for the early spring weather to warm up and then prune, and wrap the wound with cloth strips to prevent water loss, which can improve the survival rate.

In fact, it is best not to prune the newly transplanted tree, which is very detrimental to his trunk and nutrient absorption, so in this regard, you should take good care of his soil and its rhizomes, and slowly prune it again in the next year.

If there are many branches and leaves, some should be cut off to help survive. Just be careful not to stick to the cut and let it air dry.

Freshly transplanted happiness trees can also be pruned. For the cut notch, there is generally no need for special treatment.

Just cut off the branches and leaves that are not dry enough and are not vigorous enough. Don't cut it too much. Then chase some fertilizers, such as humus fertilizer, compound fertilizer and the like.

It is best not to prune in winter, and when the weather warms up in spring, prune it again when it is warm to let it sprout from the new sprouts.

Hello classmate, you definitely need to prune in this case, and any plant needs to be pruned after transplantation, so as to reduce evaporation.

If the transplanting is successful, you can prune it properly, and if it is not in good condition, do not cut it.

Can the happiness tree that was just transplanted today be pruned? What to do with the missing gap? You can directly sew up the incision and re-transplant or re-prune.

Can a happy tree that has just been transplanted in winter be pruned? What to do with the cut notch? The happy tree that has just been transplanted in winter can not be pruned, and the cut gap can be tied with a rope on both sides of the branch, and the gap is not obvious.

If you have just transplanted it, it is best not to prune it because its roots are not yet solid, which means that you can only prune after the roots are firmly rooted.

Hello, classmate, in winter, transplant the happy tree, this must need to be pruned, otherwise. May be dehydrated. Notches generally need to be painted to protect them.

If you have just transplanted this, you must let him have a certain stage of slow seedling. In other words, the roots have not yet taken root, so of course it is best not to prune. After he has completely recovered the seedlings, he can build it.

Trees that have just been transplanted in winter can be pruned, but the pruning notches can be sprayed with some carbendazim.

Summary. Dear, hello, the happy tree can not be cut off in winter, the happy tree will be completely pruned will cause the tree to freeze to death in winter, and the next year can not grow new branches and buds. Although pruning the Happiness Tree before winter can help the Happiness Tree survive the winter safely, the pruning should not be too large.

To prune the happiness tree, you need to prune the branches and leaves that are too dense to avoid the branches and leaves that are too dense and cannot be exposed to light inside. Hope mine can help you.

Dear, hello, I have seen your question, it takes some time to type, please wait for me for a while, and give you the answer immediately

Dear, hello, the happy tree can not be cut off in winter, the happy tree will be completely pruned will cause the tree to freeze to death in winter, and the next year can not grow new branches and buds. Although pruning the Happiness Tree before winter can help the Happiness Tree survive the winter safely, the pruning should not be too large. To prune the happiness tree, you need to prune the branches and leaves that are too dense to avoid the branches and leaves that are too dense and cannot be exposed to light inside.

Hope mine can help you.

1. Topping. Topping, as the name suggests, is to put the tree of happiness.

The main stem, or the top of the side branch, is slightly pinched off by hand, or cut off with a sharp object, in fact, the reason for this is to prevent the growth of the branch, so that the branch germinates at the lower end and pulls the branch. Therefore, topping is also called topping, tipping.

2. Wipe your head. Touching the head, is to cut off the upper part of the plant, generally speaking, this pruning method is for those large flowers, because the large flowers grow too tall, and then the family breeding remains unchanged, so it needs to be pruned by trowel, the same is true for the happiness tree, if the happiness tree at home grows too tall, be ruthless, wipe the head of the happiness tree!

3. Sparse cutting. Thinning pruning, in fact, is to cut off too dense branches when the flowers grow too dense, too many leaves are removed, too many flowers are pinched off, to be honest, the pruning of the tree of happiness is mainly on the branches and leaves that are too dense, the branches of the tree of happiness are too dense, itself will also affect its ornamentality, and will also affect the ventilation conditions of the tree of happiness. When thinning the pruning, it should follow the direction of the branch extension and the degree of thinning.

The pruning methods of the happy tree mainly include topping, stubbing, cutting off the head, thinning the pruning, topping is to remove the new shoots at the top of the trunk to inhibit its upward growth trend, cutting off the head is similar to topping, directly cutting off the main trunk, so that the main trunk no longer grows, stubbing is to cut the branches around the length and length consistently, and thinning is to prune the branches that are too dense.

The topping should remove the new shoots at the top of the main trunk of the happiness tree, so that it will not grow upward in a short time, inhibit its growth trend, and promote the growth of the branches and leaves around the happiness tree more luxuriantly, and the plant is very robust, and the topping is generally carried out in the spring growth period.

Cutting off the head is a bit similar to topping, but it is not to inhibit growth, but not to let the trunk continue to grow upward, the head must choose a good growth and very robust happy tree, otherwise it is easy to chop to death, the head is generally cut off the length of the trunk 1 3 to 1 2, and the wound should be sealed with wax after cutting.

Many people who don't know how to prune the tree of happiness should start from the short cut, and cut the backbone branches of the tree of happiness into long and short branches, which is very conducive to ornamentation, and can also be cut according to the growth trend, the long one is cut a little more, and the short one is cut a little less, and a large number of new shoots will germinate in the short term after pruning, and the growth is very fast.

As the name suggests, thinning is to cut the branches that are too dense to be loose, mainly for cross branches, parallel branches, inward branches, etc., these branches will not only affect the ornamentality, but also reduce the air permeability and light transmission of the happy tree, which is not conducive to the growth of the happy tree.

Topping: In the spring of each year, the new shoots at the top of the main trunk of the happy tree are removed in time. Decapitation Processing:

Chop off a third to a half of the trunk. Short truncated long branches: Cut short branches that are too vigorous and too long to reduce nutrient consumption.

Thinning and dense branches: Cutting off the cross-branches, parallel branches, dense branches, and inward branches of the happiness tree.

1. Topping

In the process of maintaining the happy tree, in the early growth stage of each spring, it is necessary to remove the new shoots at the top of the main trunk in time to inhibit the growth trend of the plant, promote the germination and growth of side branches, and improve the ornamental value of the happy tree.

2. Chop off the head

When pruning the happy tree, you can cut off the head of the main trunk, cut off one-third to one-half of the length of the main trunk, so that the main trunk stops growing upward, pay attention to the selection of strong growth, lush branches and leaves of the happy tree, otherwise the plant is prone to death.

3. Truncated long branches

At this time, the branches of the happy tree are prone to overgrowth, so it is necessary to shorten the branches that are too vigorous and too long in time to reduce nutrient consumption and promote the concentrated supply of nutrients to the plant, which is conducive to the germination of new shoots and the acceleration of the growth rate of the happy tree.

4. Thinning and pruning dense branches

When maintaining the happy tree, you can regularly prune the branches that grow too densely, and use sterilized scissors to cut off the cross branches, parallel branches, inward branches, and dense branches, so as to improve the ventilation and light transmittance between the branches and leaves, which is conducive to the later growth and luxuriance of the happy tree.

First of all, it is necessary to carry out topping, after topping, new branches will germinate at the next to two nodes of the section, so it is best to design before topping.

In addition, it needs to be taken care of so that the plants become robust.

As for whether September is suitable for topping, it depends on the temperature, if the temperature can be kept above 18 degrees, the growth is faster, and it is best to re-cut it to germinate from the base; If there is no heating in winter and the temperature is low, it is advisable to prune lightly and maintain the plant shape.

Cut off the lower branches.

It is better to have layers up and down.

It is necessary to design well in advance, and those that are to be left tall and cut high and low. The lower end of the foliage should be thinned partially. Branches that are too dense and too weak should be cut off.

I won't go to the picture, just write how I raised it, my small tree grows to more than a meter, I cut it off, as long as it grows seedlings, I cut it, I don't want it to grow too tall, as for watering, I water almost every day, to be less but to water frequently, the leaves and stems are sprayed twice a day, and the watering can is adjusted into a mist, I hope it will be useful to you, by the way, I put it at the door of the balcony, and it has not been exposed to the sun.