How should I prune my banyan bonsai?

**It's too small, I can't see it clearly, it should be a ginseng ficus!

First of all, explain that the highlight of the ginseng ficus is the part like ginseng.

Then turn the bonsai and observe and choose the best viewing surface, that is, from which angle you think it looks best.

The next is to determine the backbone, according to the situation is generally a single dry type, can also be a double dry type, according to the situation to choose to stay. Then cut off the overly dense branches, so that it will look layered, like a tower, layer by layer, but be careful not to be too stiff, to be natural, generally the lowest branch is longer than the previous layer, that is, the bonsai branches and leaves are green into unequal triangles.

The above is the scissor, if you still want to make it beautiful, you can also use the tie method, now generally use aluminum wire, copper wire is also OK, use aluminum wire to tie up the branches one by one, aluminum wire and branches into about 45 degrees angle is the best, while bending the branches, bonsai has a saying that the branches are indefinite, that is the boutique, but the coiling is difficult, be careful not to break the branches, then it is sad!

Of course, making bonsai is not an overnight thing, if you want to take shape, it will be two or three years short, and you won't know if it's long, and it may be a lifetime thing. In fact, it's good to have a good time.

Completely hand-played, and with a mobile phone! You can contact me if you have any questions.

How to prune banyan bonsai, these tips must be mastered, your bonsai is absolutely beautiful!

You look carefully, there should be wire on the branches, you look at how they used to wrap it, go buy a little wire back and then wrap it, this year's new branches are very tender, will not break rest assured, pull the branches into a plane will look a little better, cut off a little bit that you feel too long, it is recommended that you leave a long tail don't cut it first, leave it for the future will look good.

Search for banyan bonsai on the Internet, see what type you like, you can follow the strip or shape to use iron wire or copper wire to assist, like twisting the twist of the iron wire on the paper, so that the branches are easy to shape, not easy to break.

Usually it is lamellar. Best wishes.

It is better to cut unequal triangles.

1. Topping:

Topping is a necessary part of creating a banyan bonsai, because this pruning operation can inhibit the height of the banyan tree, promote the growth of other side buds of the banyan tree, and make the plant look fuller. In addition to removing the apical buds of the main branches, topping should also be carried out after the side branches have grown to a certain length to avoid overgrowth.

2. Reasonable bud picking

In the process of growing in the banyan bonsai, many adventitious buds will grow on the branches, and these buds must be removed in time to avoid the plant growing too many branches and destroying the overall shape.

3. Cut leaves in a timely manner

In the stage of new leaf germination of banyan bonsai, the new leaves that have just grown can be properly pruned, so that the branches can germinate new leaves many times, and the color of the leaves will become more and more vivid, and the ornamental value will be higher.

4. Regular pruning:

If you want to know how to prune the banyan bonsai, the pruning branches is an essential point, the banyan bonsai will grow many new branches, at this time, it is necessary to decide the branches according to the personal aesthetics and the growth of the plant, which branch you think affects the beauty can be cut. However, it is generally pruned off forked branches, dead and diseased branches, and branches that are too dense and too long.

5. Change pots and prune roots:

If the root system of the banyan tree is too long or too dense, it can be pruned properly, and the root trimming is best combined with repotting, and if the root system of the banyan bonsai is overgrown with flower pots, it is necessary to change to a larger pot. When pruning the roots, the overly dense root system should be thinned and the dead roots should be cut off reasonably, and then replanted.

1. Pruning: Banyan bonsai often grows a lot of new branches, the method of pruning should be determined according to the shape of the tree and its own aesthetics, if you feel that the growth of this branch hinders the overall shape of the sparrow, you can cut it off.

2. Topping: This is a way to inhibit the growth of banyan trees, promote the flat growth of side buds, and cut off the tenderness of the branches.

3. Picking buds: In the process of growing banyan bonsai, there will be a lot of adventitious buds on the branches, and the buds should be picked at any time to avoid germinating too many branch cuttings and affecting the appearance.

4. Leaf picking: The ornamental period of the ficus tree is often the germination period of new leaves, and proper pruning of the new leaves that have just grown will help to germinate new leaves many times, and the color of the leaves will be bright and pleasant, improving the ornamental effect.

5. Root pruning: When turning the pot, the roots should be pruned in time, and the root system is too long or too dense, so it should be pruned. If the root system is not covered with the bottom of the pot, the original pot can be used, and the roots do not need to be trimmed; The root system is already full, change to a larger pot, and thin the dense root system, remove the old roots, keep a few new roots, and replant. Raid early.

To prune the shape of the banyan tree, first topping is carried out to make the plant look fuller. Then it is reasonable bud picking, as well as timely leaf pruning to ensure the beauty of the plant. To grow a banyan tree, you need to place it in a semi-shaded place and let it receive three hours of scattered light every day, so that it can photosynthesize and accumulate nutrients.

To prune the shape of a banyan tree, you first need to top it. Topping is a necessary part of building a banyan bonsai. It is necessary to remove the top bud of the main branch, and also to topping the side branches after they have grown to a certain length, so that the whole plant looks fuller.

The second is to pick the buds reasonably, in the process of growing the banyan bonsai, many shoots will grow on the branches, and the shoots that affect the overall appearance need to be completely removed. Finally, the leaves need to be pruned in a timely manner, and the yellowed and wilted leaves on the banyan bonsai need to be pruned clean to ensure the beauty of the plant.

To cultivate banyan bonsai, you need to prepare loose and fertile soil with good drainage and air permeability. Banyan trees do not have a high need for light, but they also need to receive proper light, and they need to be placed in semi-shade and let them receive three hours of light a day for photosynthesis and accumulate nutrients to promote growth.

Banyan trees have a higher need for water, but their roots are not tolerant of stagnant water. In spring and autumn, it needs to be watered every three days, in the summer when it is hot and hot, it needs to be watered every other day, and in winter, the temperature is low and the water evaporation is slow, so it needs to be watered every half a month.

The best pruning of banyan trees is in May, when the temperature is suitable and the growth rate is fast.

Banyan bonsai is evergreen all year round and has no dormant period, so pruning can be done at any time. Many methods can be used, such as pinching, pruning, coiling, pulling, carving, twisting, and picking all leaves.

It is better to place the banyan tree in a sunny place for a period of time and then prune it well, so that the plant grows luxuriantly and takes shape quickly. It is normal for the new leaves to be relatively small, which takes a period of growth, but they will grow soon.

When there are new leaves growing, fertilizer and water management should be strengthened to promote the rapid growth of branches with destroyed leaves, and the leaves that grow in a sunny place are dense, small and thick, and have high ornamental value. Note: The smaller, denser, thicker and thicker the leaves of the banyan bonsai, the better.

When pruning, the first thing to do is to focus on shaping, the overall shape should be good, and the overall situation should be the main pruning. Remove overly dense branches, diseased branches, cross branches, etc. Dead branches can be cut off, and the following are tips for pruning banyan trees. Pruning is a means of styling a banyan tree.