Renovation of old houses with attention to detail! What should I pay attention to in the renovation

Updated on home 2024-07-13
7 answers
  1. Anonymous users2024-02-12

    In terms of the steps of the renovation of the old house, there is one more stage of house demolition than the decoration of the new house, and the matters that should be paid attention to are also increasing. There are even renovation budgets for old houses that cost more than new ones. So let's take a look at the detailed construction stage of the renovation of the old house and the situation that should be paid attention to at each stage, and the friends who must carry out the renovation of the old house, hurry up and take a look.

    1. Demolition and modification of the main body.

    Including wall demolition, wall building, shovel wall, ceiling demolition, floor tile demolition. In general, it is to dismantle all the original interior decoration and product design in the old house until it is repaired into a rough embryo, so as to facilitate the construction of the project later. Naturally, if you are doing a partial renovation, you only need to remove part of the original interior decoration after carrying out civilized construction of the project that does not need to be renovated.

    Common problems: Before demolition and reconstruction, carry out a comprehensive inspection of the original house, clarify the specific address of the counterweight wall and load-bearing beam, etc., and the load-bearing beam and counterweight wall must not be destroyed at will, especially when demolishing and modifying. When removing the floor tiles, in addition to knocking out the floor tiles, the concrete foundation cushion commonly used for paving tiles also needs to be removed neatly.

    2. Hydropower decoration.

    At the waterway level, first check whether there are problems such as rust and aging in the original sewer pipeline, and try to avoid leakage and water seepage that may occur later. After the renovation of the waterway is the construction of the power circuit project, some of the old buildings are very old, it is very likely that the application or has long been replaced by aluminum wire and cable, the renovation will be replaced by copper core wire, the wall buried wire double eyelid must wear PVC insulating sleeve. Frequently Asked Questions:

    When renovating the waterway, clarify the detailed location and installation method of water purifiers, electric water heaters, toilets, and washbasins in advance, and whether they must boil water. If the kitchen cabinet is ordered again, in the case of the manufacturer's first door-to-door measurement of the size, it is best to call the master of the water change together to communicate the reasonable layout of the water pipe in public. After the waterway is reconstructed, it must be irrigated for testing.

    At the level of power supply circuit, the strong current and weak current are separated, and the conduit and bottom box used must be flame retardant, and the largest quality is selected within the cost budget.

    3. Renovation of walls and pavement.

    Before the project was demolished and renovated, it was necessary to hire professionals to conduct an on-site investigation, such as whether there were significant cracks on three sides of the wall. For a part of the wall, if the level of dust delamination of the wall is weak, it is proposed to remove it completely, use mixed mortar for base treatment, and then scrape putty and spray latex paint. The top part is selected according to the actual situation.

    The wooden floor of the pavement can be removed and re-paved immediately, and the floor tiles can be paved again. Common problems: The renovation of the wall and the ground on three sides must be solved first, especially the wall, if there are large gaps, it is proposed to hang the label before spraying latex paint again to prevent the recurrence of gaps and other problems.

  2. Anonymous users2024-02-11

    It is necessary to pay attention to the safety of the wall, pay attention to whether the wall is falling off, pay attention to the overall structure, and need to renovate the aging water pipes and circuits.

  3. Anonymous users2024-02-10

    1. Don't replace all your old furniture. When renovating an old house, you don't need to replace all the furniture, for the kind of quality that is intact, but the surface is a little old, then you can paint the surface of the furniture, or renovate it, and you can save a lot of money.

    2. Don't smash the structure of the house. Many old houses have defects such as small unit area, unreasonable functional distribution, poor lighting, etc., and many old houses are brick-concrete structures, and the first is the load-bearing and seismic components when the wall is renovated, followed by the enclosure separation components, to avoid knocking down the load-bearing wall, otherwise it will leave serious safety hazards.

    3. Aging water pipes and circuits must be replaced. Because there are many unreasonable layouts of the original waterway pipelines of the old house, it is necessary to thoroughly inspect the original waterways during decoration to check whether there is rust and aging.

  4. Anonymous users2024-02-09

    After living in the house for a period of time, there will be various problems, or the wiring is aging, or the wall is damaged, and it is more likely that the owner feels that his room should be replaced with a more fashionable decoration style. In short, the renovation of old houses can be said to be very common today. However, many inexperienced friends often feel at a loss, do not know what to pay attention to when renovating, for this reason, this article will introduce you to some of the problems that need to be paid attention to in the process of renovating old houses, so as to bury Zen when you need to do a reference.

    Water circuit retrofits

    First of all, water and electrical circuit renovation is the most complicated renovation of old houses. Before decoration, carefully check whether the original water and gas pipelines are rusted and aged, and the water pipes should be replaced with copper pipes or PPR pipes. In terms of circuit renovation, if the old house uses aluminum wire, it must be dismantled and replaced with a new one.

    Nowadays, with more and more appliances used in the home, there are many places where switches and sockets need to be placed, so before decoration, it is necessary to do a good job of layout work in advance.

    Bathroom renovation and treatment

    A leak in the bathroom can also cause trouble. It is recommended that before decorating the old house, it is best to do a closed water test in the bathroom space to check how well the previous waterproofing treatment has been done. It is best to greet the downstairs neighbor before the test, and in case of a real water leak, you can also get the understanding and cooperation of the neighbor.

    If there is a problem, be sure to re-do the waterproofing before starting to apply tiles.

    The wall structure is careless

    Random dismantling and alteration of the structure leads to deformation of the wall. If the load-bearing wall is interrupted in order to expand the space, the load-bearing and seismic capacity of the wall components will be weakened, leaving serious hidden dangers. The walls of old houses will crack and peel, so when decorating the walls, we must pay attention to the grassroots treatment.

    If the wooden doors and windows have been deformed, then they should be dismantled and remanufactured. Iron doors and windows, if the paint on the surface has peeled off or the main body is cracked, it is recommended that you replace them.

    Renovation of doors and windows

    The surface of doors and windows will inevitably produce scratches, for stains that are difficult to erase and some slight damage problems, only need to directly paint to cover the basic problem, before painting, you need to polish the wax layer on the surface of doors and windows first, and then brush the primer and topcoat. In the whole process of decoration, especially after gluing and painting, it is necessary to open the windows frequently to maintain indoor air circulation. The renovation process should be thoroughly disinfected regularly and can be sprayed with 3% bleach water or with 3% peracetic acid solution.

    Close doors and windows for 1 hour after spraying.

    Through the above introduction, we have a general understanding of some precautions in the process of renovating old houses. From this, we can see that the renovation of old houses and old houses should first bend the dust and pay attention to the transformation of the line. Many houses are facing the problem of aging wiring, which can become a more serious problem later if it is not addressed during the renovation.

    The other is the renovation of the bathroom, the principle is similar to the renovation of the water pipe. In addition, we should pay attention to the renovation of walls, doors and windows should be carried out according to the actual situation, and the demolition should be demolished to avoid risk residue.

    You can get it for free

  5. Anonymous users2024-02-08

    Now people's living standards have improved, the pursuit of fashion is also very high, their old house is not good, it needs to be redecorated, but in the transformation, also need some skills, rather than casually decorate it, in the renovation of the old house, what should we pay attention to? Let's take a look.

    1. Skills for renovating old houses.

    1. In the renovation and transformation of old houses, to transform the wall, and in the transformation of rural houses, it is necessary to do grassroots treatment first, such as it is best to demolish the original wall, and then through the treatment of the grassroots or find a way to repair again, and then brush latex paint, because this can ensure that the wall is strong enough. In addition, many owners hope to save some renovation costs when renovating and renovating old houses. The reason is that they only deal with some parts, but after a while, a series of problems arise that end up failing.

    2. In fact, the most common problem of old houses in rural areas is the aging of doors and windows. Of course, if the material of the doors and windows is sturdy, and you like the style, you can repaint. If the doors and windows are scattered, there are some safety problems, and they must be removed and remade, otherwise a series of safety accidents will occur.

    3. When the old house is renovated and repaired, because the old house in the rural area has been used for a long time, there will generally be some aging problems. Among them, the water circuit is the place where the owner needs to pay attention. For example, you should check the original water circuit for problems such as old flush purification and corrosion.

    2. Precautions for renovation and renovation of old houses.

    1. When renovating an old house and keeping an eye on the hail, you should take a look at the structure. Before renovating an old house, you should first adjust the space in the structure.

    2. In the decoration of the old house, there is still the problem of water. Depending on the location of showers, washbasins, toilets, washing machines, dishwashers, dock pools, water purifiers, and water heaters, some water intakes, drains, and drains should be added. There are also old pipes that are replaced with new ones.

    3. When renovating and renovating the old house, we should pay attention to the circuit, and the circuit of the old house must be completely transformed. For example, the lead wire is a copper conductor, but it should be replaced with a new qualified conductor. In addition, in view of the fact that the wiring settings of some old houses are relatively old and the circuit is too simple, it is necessary to re-plan the direction of the circuit reasonably.

    But in general, the distribution box should have five switching circuits, including the main switch, lighting, common outlets, air conditioning, and kitchen and bathroom outlets. If you have a water heater, you should install a separate circuit.

    The above are some tips and precautions for the renovation of old houses, I hope that by reading this article, you can have a better understanding of the renovation of old houses, I hope you can help you.

    You can get it for free

  6. Anonymous users2024-02-07

    In today's age of house prices, it is very difficult to buy a new home, so we started to turn to second-hand homes. In fact, after the renovation of the second-hand house, you can achieve the same effect as the new house, ** more favorable. So,Renovation and renovation of old housesWhat are the steps?

    What problems should be paid attention to when renovating and renovating old houses? Now let's take a look.

    1.Demolition of the main body of the old house, in which the wall tiles of the kitchen and bathroom had to be waterproofed after demolition. 2.

    After disassembly, make sure that the interior is clean and tidy, and determine the main materials; 3.The general design of the old house, planning the required decoration style; 4. For the construction of hydropower projects, high-quality materials should be selected; 5. Make sure that there is no damage to the wall and tiles can be made.

    1.The main structure of the old house cannot be dismantled at will, especially the loading wall. If accidentally removed, it would be a huge hidden danger and pose a huge threat to the occupants of Juqin.

    So, before you renovate, you need to know which ones belong to the loading wall and which ones belong to the wall without load-bearing. If the house is too old, it is not suitable for large-scale demolition.

    2.In the process of renovating the old house, it is best to replace the water and electricity materials, even if there is no problem at the time, but the service life is long, and the follow-up treatment is easy to rot and there is a problem, it is corrected, and it will be wasted by the hungry reed. More money, so whether or not there is a problem with the renewal, you have to replace it to be sure.

    3. Many owners buy second-hand houses and are reluctant to replace doors and windows to save money, which is not good. There are security risks associated with using windows and doors for long periods of time, not being recognizable with the naked eye, and not knowing if the original owner will keep the spare keys. Therefore, it is better to have a replacement that will not cost too much in any case.

    Renovation and renovation of old housesWhat are the steps and inRenovation and renovation of old housesThis is the point where you should pay attention to what you should pay attention to. There are many issues that should be paid attention to in the renovation of old houses. In order not to cause damage to the old house, you need to be especially careful.

    You can get it for free

  7. Anonymous users2024-02-06

    Nowadays, people's lives have a high fashion atmosphere, and there will be some ideas for renovation and transformation of the old house at home, but there are also certain skills when renovating, so what are the skills and precautions for the renovation of old houses?

    1.When renovating and renovating the old house, the first thing to do is to renovate the wall, and the best way to renovate the wall is to remove the previous wall, and then do a base treatment, and then repaint, so as to ensure the firmness of the wall. Sometimes many homeowners want to save some costs, so they will do local treatment, and problems will occur after a long time.

    2.Aging windows are also the most common problem when renovating old houses, and if the doors and windows are still very strong, they can be repainted. If the doors and windows have some safety problems, they should be removed and redone, otherwise, a series of safety incidents will occur.

    3.When renovating and renovating old houses, the water circuit is usually a little aging, which is a place that the homeowner needs to pay great attention to, and the original water circuit should be checked for problems such as aging and corrosion of the macro shed.

    1.When the old house is renovated, it is adjusted according to different structures, and the parts that are demolished and renovated, such as top cabinets, closets and other places with non-load-bearing walls, are redesigned, and the previously unreasonable places are re-changed, so that the wasted space can be reused and the space utilization rate can be effectively improved.

    2.When renovating old houses, water inlets, drains and gutters are added according to the location of showers, wash basins, toilets, washing machines, sinks, mop pools, water purifiers and water heaters. Also, replace the existing one with a new one.

    3.When renovating and renovating the old house, pay attention to the circuit, and replace the wires with the latest qualified wires. In general, cabinets, main switches, indicator lights, universal rock sockets, air conditioners, kitchens and bathrooms include 5 switching circuits, if there is a water heater, you need to install a separate circuit.

    You can get it for free

Related questions
9 answers2024-07-13

1 Check all outlets.

Friends who don't have a pen can take a charger and a three-phase connector power strip. The charger can check the two-phase socket, and the three-phase connector can check the three-phase socket. >>>More

14 answers2024-07-13

When a house is occupied for a long time and exposes all sorts of problems, there are always a few disappointments. Therefore, many owners will redecorate their old houses after living in them for a long time. How much does it cost to renovate an old house? >>>More

9 answers2024-07-13

Generally speaking, according to the local market price, the cost of renovating an old house is about 300,000 to 500,000 yuan. >>>More

8 answers2024-07-13

If the construction of wood painting works.

It's a wood paint that uses water, and you just have to dilute the tap water at all the normal ratios. If nitro paint and polyurethane paint are used. >>>More

6 answers2024-07-13

The first thing to know is which walls cannot be demolished. load-bearing walls. Prefabricated panel walls in brick-concrete buildings cannot be removed, doors and windows cannot be opened, and brick walls with a thickness of more than centimeters cannot be removed or altered. >>>More