How to start the renovation after the heating comes, and when will the heating be installed in the d

After the heating, the home radiator wants to decorate or renovate the radiator, to close the radiator into the pipe valve, warm tips: the heating festival is best not to decorate, its winter decoration disadvantages are great, but whether to decide in the winter decoration or their own decision, comprehensive consideration.

Benefits of Renovation for Heating Season:

The designer has good service; There are fewer people to decorate in winter, and the workload of the designers of the decoration company is also less, so they can make more detailed, comprehensive and personalized design plans.

Low cost of materials and labor; There are fewer people who buy decoration materials in winter, and some decoration materials manufacturers will give more affordable ** to attract consumers, with small profits but quick turnover. In winter, there is also less work for renovation workers, and there are plenty of excellent workers.

the best time to check the quality of the wood; Winter is the driest time of the year for timber, and it's time to buy wood that is in good condition.

Disadvantages of decoration during the heating season:

Long construction period; In order to ensure that the temperature of the construction is up to standard in winter, the construction is often chosen between 10 a.m. and 4 p.m., which shortens the daily construction time, and the Spring Festival holiday for workers is relatively long, generally about 15 days, so the winter decoration is relatively long.

Wall paint should not be dried; Although the paint and adhesive painted in winter are easy to dry, but the wall paint is not easy to dry, the paint manual often indicates that the construction environment temperature is not less than 5 degrees, and the plastering and scraping putty are easy to freeze when the temperature is insufficient, resulting in the phenomenon of hollowing in the future. In addition, walls that are dried in dry winter weather are prone to cracks as thin as a hair.

Cement mortar has low viscosity; Cement mortar is easy to freeze in winter, and this state is not really solidified, the viscosity strength is not high, and the cement mortar is also prone to broken ice. When the temperature warms up and the ice melts, the tiles are not tightly glued, which will cause the tiles to fall off.

Harmful gases are difficult to volatilize; In winter, the temperature is low, and there are few open windows, and it is difficult to release the volatile gases indoors. The volatilization of harmful gases is also related to the temperature, the lower the temperature, the less volatilization, and the higher the temperature, the greater the volatilization.

The water inlet valve in the room needs to be closed before the heating can be retrofitted.

1.New house that is not renovated.

At present, most of the new houses are rough houses when they are handed over, and they need to be renovated to live in. In this case, the owner only needs to install the radiators before the heating starts. Heating installation is a systematic project, and most of the pipes will be buried, so the pipeline installation and heating location determination are generally carried out before the installation of water and electricity.

The owner needs to go to the construction site and establish the pipe direction and radiator installation location with the designer, and then install the construction according to the plan.

At this time, it should be noted that most of the radiators are customized products, and there is a certain period of production and delivery cycle. In order not to affect the progress of the project, the owner should grasp the purchase time and try to choose the radiator, pipe fittings and other materials in advance, so as to have enough preparation time and deal with the problem in time.

2.Renovated house.

If you want to install or replace the radiator after the house has been renovated or the heating has been used for many years, you need to install it as soon as possible before the heating is tested. The owner can ask the manufacturer to provide door-to-door measurement and design scheme services, and customize their favorite radiator style and color according to the measurement results and decoration style. If the heating needs to be moved, or there are radiators in the bathroom and kitchen that go through the hidden pipes, you need to groove and change the pipes in advance to do waterproofing and bricklaying work.

At this time, it should be noted that there may be water or stains polluting the ground or wall during the installation process, so it is recommended to lay the floor and treat the wall first. In order to prevent the valve from being stuck with cement during the renovation period, the valve is wrapped with a cloth for two months after the pipe change is completed.

Heating definitely needs to be installed in time for renovations. Otherwise, it will damage the effect of the decoration. In particular, the installation site must be carried out before the renovation.

It is best to install the installation after all the procedures on the wall have been processed, that is, after the wall paint is painted, the wallpaper is pasted, the bathroom and kitchen tiles are pasted, and the wooden floor is not laid.

When I was renovating my home, I was changing the heating of the circuitry.

If the house at home has been renovated, the house can be fitted with radiators.

The pipes can only be installed on the flat surface, which does not affect the overall decoration and can give full play to the heat dissipation performance of the system. In fact, as far as heating is concerned, whether it is a renovation or whether the house is old or new, it can be installed and is suitable for all homes that need to be installed. The so-called open heating, open heating, refers to the customer's home has been decorated, on the basis of reasonable layout design for pipeline wiring, heating installation, pipes can not go underground, can only go up to the wall roof, etc., but compatible with aesthetics.

The installation of radiators also has certain advantages, such as the radiator is still more convenient when installing, and the installation cycle is relatively short, basically only two to three days can be installed. In addition, the heating effect of the radiator is still very good, and it is more convenient to maintain it.

Notes:

1. Pipeline construction, destruction of decoration, pipeline design is not ingenious, exposure is conspicuous, poor construction technology, destruction of decoration.

2. Ordinary pipeline water seepage, air seepage, ordinary PPR hot melt pipe, tap water aluminum-plastic pipe, after a long time, water seepage and air seepage, burst pipe leakage, trouble without training.

3. The radiator is not installed in the position, the furniture and decoration have been finalized, and many rooms do not have a suitable position to install the radiator, and the radiator is erected and installed, which not only affects the appearance, but also causes the heat to accumulate in the upper part of the room, and the effect is poor.

4. In the selection of radiators, choose a flat radiator with a non-hot surface. Because the surface of the platinum flat radiator is not hot, it can be hidden and installed behind the sofa and furniture, and does not take up space at all, so it solves the problem of the installation position of the radiator.

<> "How to install heating in a house that has been renovated.

What are the problems encountered in installing surface-mounted radiator systems in hardcover rooms or old houses that have been renovated?

How to choose and operate a wall-hung boiler for surface-mounted radiator system?

First, it is necessary to evaluate the performance of domestic hot water. The blockage of tap water pipelines in the vast majority of old communities is very serious, resulting in insufficient water pressure of tap water, and the wall-hung boiler is very prone to the phenomenon of hot and cold domestic hot water, so the water temperature should be tested with a liquid thermometer in the process of debugging the wall-hung boiler. The temperature fluctuation of domestic hot water of the wall-hung boiler is a reasonable range between plus or minus three degrees, and it is the most comfortable and ideal state between plus or minus one degree.

The second point is whether the wall-hung boiler has the ability to automatically adjust the temperature of the heating water with climate change. If the radiator is set to 60 degrees of water temperature outdoors, and the home can reach 22 degrees for our comfort, then by noon, the outdoor temperature may have risen to 10 degrees above zero, and if we still burn the water temperature of 60 degrees, the indoor temperature may soar to 25 degrees and 26 degrees. Therefore, if the wall-hung boiler has the ability to automatically adjust the water temperature with the change of climate, so as to keep the indoor temperature constant, it will greatly reduce energy consumption and improve our heating comfort.

The third Xun Bump family, the convenience of operation, can you turn on the heating with one button? Is it possible to directly and accurately control the indoor temperature? The traditional way is to indirectly control the indoor temperature by controlling the water temperature, which is cumbersome to operate, and the effect of temperature control is also very indirect and inaccurate.

Fourth, set up scenario patterns to accurately match our heating needs. For example, for office workers, it is completely possible to set the mode of leaving home from 8 am to 7 pm, and set the indoor temperature at about 16 degrees. The rest of the time, you can set it to home mode and set it to a comfortable state of 22 degrees.

With the change of climate, through the calculation of artificial intelligence, the heating water temperature may be 60 degrees, it may be 45 degrees, and it is possible that the wall-hung boiler has not been ignited all day long, so if the surface-mounted radiator system uses the intelligent wall-hung boiler, you can harvest a constant temperature and comfortable heating life, and compared with the traditional wall-hung boiler, it can greatly reduce the heating cost.

Can you turn on the heating during the renovation dear! Hello, I am happy to answer for you<> you can't turn on the heating during the renovation period. Wooden floors, furniture, etc. can be deformed, which is not conducive to room ventilation, etc.

Freshly renovated houses can be heated in winter. After the heating is turned on, the temperature rises, which is conducive to the volatilization of harmful substances in the decoration without residue. At the same time, it would be better to be able to ventilate.

It is better to turn on the heating in a freshly renovated house in the first winter. If the weather is too cold in winter, it will definitely have a certain impact on the items indoors. If the indoor wall is not very dry, the white will swell and fall off, the ground will be warped and cracked, and the radiator will be fine if there is no water.

It's best to keep the indoor guard a little higher, just in case. The insulated wall works to a certain extent, but if the outdoor temperature is too low and the indoor heating cannot be provided, the temperature inside the core will still be reduced. This is not conducive to the protection of the decoration effect and the volatilization of harmful gases.

It's best to move out and live for two or three months, buy pothos, hanging baskets and other green plants and put them back, open the windows for ventilation, and just decorate the formaldehyde is very powerful! You can also put some activated charcoal to remove formaldehyde, hope mine can help you <>

Do you have any other questions for you?

It's troublesome, because it will have to be installed when the time comes, which is simply redundant.

Save trouble. If you want to decorate, then you should change the heating as soon as possible, which will reduce a lot of trouble for yourself in the later stage.

If you want to change the heating, then it must be more convenient, you just change it and then decorate, then the whole is very perfect, and you don't need to remove the decoration equipment and then decorate the heating.

It should be more convenient, after changing the heating first, it will be very convenient when laying the floor, and it will also make our next decoration more convenient.

Of course, this is a hassle, if there is no problem with the heating, do not change it, so that it is lonely and wastes materials, and it will cost a lot of money and waste time.