Before driving out of the roundabout, you should turn on the right turn signal

Huandao Road. Generally at the intersection, the traffic is busy, there are more motor vehicles in and out, in order to drive safely, remind passing vehicles to pay attention to safety avoidance, such as entering the roundabout before the motor vehicle should turn on the right turn signal, all motor vehicles driving in the roundabout are preparing to get off the road, so the motor vehicle should be turned on in advance before preparing to get off the road, prompting other motor vehicles to pay attention to avoidance, because the turning down road should appropriately reduce the driving speed, and turning on the turn signal is to prompt the following motor vehicle to slow down and avoid.

1) You are about to enter the roundabout.

2) Standard 4 exits roundabout, you drive at least a quarter more.

2. When going out of the roundabout, you should use the right turn signal, which has two purposes:

1) You're about to drive out of the roundabout.

2) Remind vehicles outside the roundabout to pay attention to avoidance.

3. If it is a right-turning vehicle, you need to drive into the roundabout, directly hit the right turn signal, and drive on the outside of the roundabout.

4. When encountering pedestrians, non-motorized vehicles and motor vehicles that have not been avoided, it is natural to take necessary safety measures and take the initiative to give way.

Generally, the exit roundabout is two lanes, and vehicles generally drive on the right side, so. There will be a right turn.

There are several exits at the roundabout, and turning before leaving the exit is a safety reminder to other vehicles, so as to ensure the safety of the vehicle.

If you change lanes, you have to turn signals, and if you enter the roundabout in one direction, you don't need to change lanes, and you have to turn on the lights when you come out in different directions.

After entering and passing through the toll gate, there will be a "Insa-shaped intersection", and it is indisputable that you need to drive to the right with a right-going indicator and a left-oriented indicator on the contrary. Before exiting the highway, enter the side road, known as the "speed lane", but please note that the right direction light must be turned on in advance before entering the lane. Some sections have speed points at the end of the speed lane (the start of the slope), so the speed limit is mostly 40 km/h.

For a vehicle to slow down from 120 km/h to 40 km/h, it basically needs to be close to the standard of a rapid inspection. If you don't turn on your lights ahead of time, the car behind you may be rear-ended. Because in the end, many novice drivers don't understand the school rules.

But there is one section to be aware of, and that is the "left turn waiting area" at the intersection. You don't need to turn on the rotating lights before entering the rotating waiting area. Because the waiting time for a left turn is very long, if you keep turning on the turn signal, it will affect the front and rear drivers.

However, after entering the waiting area, the direction indicator must be turned on to serve as a reminder to the direct vehicle. Vehicles must turn to the left accurately when turning, and if there is a zebra crossing on the road ahead, they must make a "big turn", i.e. cross the zebra crossing and then turn again. This is a requirement to prevent the rotation radius of some vehicles from being too large, and one rotation cannot pass normally and affect other vehicles.

This is part of the scene where the implementing regulations allow the twin islands, etc. In fact, in low-visibility weather on expressways, it is not only necessary to turn on the double flashing lights, but it is also possible to drive when driving on roads such as city roads, urban highways, and national highways where the field of view is too low.

Not being able to use dual flashes is a mistake that many novice drivers are more likely to appear in a self-service fleet operation when there are no special conditions in normal weather. At the same time, when turning on the dual flash, a near light source should always be used. Because the visibility is lower, it can be difficult to identify the road state with directional light, and the refraction of the directional light can form a "light curtain" in front of it, which can affect the recognition effect.

When driving into a roundabout, should I turn on the left or right lights? According to the current traffic regulations, when driving into a roundabout, you should first turn on your left turn lights and enter the roundabout in turn, avoiding cars driving out of the roundabout. Do not steer while driving at a roundabout.

Before exiting the roundabout, you should turn on your right turn lights in advance and exit the roundabout.

Vehicles in the roundabout have the right of way, and vehicles traveling in the roundabout and the roundabout should be avoided when entering the roundabout. The order of passage at roundabouts is first-come, first-served, first-served. Roundabouts with many cars pass slowly, so you must obey traffic rules, pay attention to civilized driving, never rob, forcibly cut in line, affect the speed of traffic, and are prone to traffic accidents.

You should turn on your left turn signal when driving into the roundabout, because while driving, the roundabout is on the left hand side of where we are driving. If you pass a roundabout, you need to drive right and then switch to a right turn signal.

Situation 1: Drive from the ramp onto the main highway road, raise the vehicle to about 60 km/h in the ramp, and continue to turn on the left turn signal, and turn off the turn signal after entering the main highway road.

Situation 2: If you enter another highway from one highway to another, or where two highways intersect, and there will be another highway merging into the vehicle on the right side of the highway you are driving, try to keep driving in the left lane without turning on the turn signal, and it is best not to change lanes to the right at this time.

Situation 3: Similar to Situation 2, except that you are driving in from the right, at this time turn on the left turn signal to merge into the normal lane, but it is best not to change to the leftmost lane after the merging all at once, you need to change lanes one by one.

Safety first, I wish you all peace and security!

Depending on your orientation, you should generally use the left light, because the roundabout is turned in from the left, and there are many left turn curves.

If the vehicle wants to turn left, it should choose the left lane in the roundabout, and the vehicle should use the left turn signal when entering the roundabout; If the vehicle is only going straight and does not need to change lanes, then the vehicle does not need to use the left turn signal when entering the roundabout. If the vehicle is going to turn right to another intersection, it does not need to use the left turn signal. When the vehicle selects the corresponding intersection, it should use the right turn signal in advance.

How to use the turn signal when driving into the roundabout:

1. Turn left when entering the roundabout If the vehicle wants to turn left, you should choose the left lane in the roundabout. Since vehicles need to cut into the inner road from outside the island, vehicles should use the left turn signal when entering the roundabout, telling the vehicles on the island and the rear car "I want to cut the inner road to turn left, pay attention". Before the vehicle leaves the roundabout, it should use the right turn signal in advance, and after confirming the safety, start from the inside lane to change lanes outside the roundabout, and finally drive out of the roundabout.

2. Go straight into the roundabout If the vehicle wants to go straight, you should choose the middle lane in the roundabout. Since the vehicle does not need to change lanes after entering the roundabout, the vehicle does not need to hit the left turn signal when entering the roundabout; When the vehicle is about to exit the roundabout and continue going straight, it needs to cross the right lane in the roundabout, so you need to use the right turn signal to alert other vehicles to pay attention, and then drive out of the roundabout.

3. If the vehicle wants to turn right to other intersections, you can choose the right lane in the roundabout, or turn right from the periphery of the roundabout. The situation is similar to that of a straight line when the vehicle enters the roundabout, so there is no need to use the left turn signal; When the vehicle chooses the corresponding intersection, it should hit the right turn signal in advance, and turn right out of the roundabout after confirming the safety.

Before entering the roundabout, the vehicle should turn on the right turn signal. When leaving the roundabout, you need to turn on the right turn signal again.

The roundabout road is generally at the crossroads, the traffic is busy, there are more motor vehicles in and out, in order to drive safely, remind the passing vehicles to pay attention to safety avoidance, such as entering the roundabout before the motor vehicle should turn on the right turn signal, all the motor vehicles driving in the roundabout are preparing to get off the road.

Therefore, before the motor vehicle is ready to get off the road, it should turn on the right turn signal in advance to remind other motor vehicles to pay attention to avoidance, because the driving speed should be appropriately reduced when turning down, and turning on the turn signal is to prompt the following motor vehicle to slow down and avoid.

When driving in and out of the roundabout, the car owner must understand the rules for the use of turn signals, otherwise it will.

Motor vehicles do not need to turn on the turn signal when entering the roundabout, but they need to have a turn signal when exiting the roundabout to remind the car behind. Because it will not affect other vehicles when entering the roundabout, the exit is uncertain when exiting the roundabout, so you must turn on the lights.

Normally, roundabouts are set up at multiple intersections (more than 3 intersections), and all vehicles heading to each intersection are required to enter the roundabout except for right-turning vehicles. The roundabout is generally designed with four lanes: the left lane is used for left turns, the middle two lanes are used for straight ahead, and the right lane is used for right turns out of the roundabout.

How to use the turn signal: do not hit the left light when you enter, and you must hit the right light when you go out. The best time to turn on the right turn signal is when you exit the road before the "roundabout" exit.

How to drive: All motor vehicles entering the "roundabout" should drive in a counterclockwise direction and choose their own driving route correctly. Generally, the "roundabout" is two circles.

Drive to the adjacent road on the right. Pass according to the "shallow entry and shallow exit" method, that is, turn on the right turn signal when entering the island, and drive away from the "roundabout" in the outer ring. Drive to other intersections (including U-turn vehicles) and drive according to the "deep and shallow" method, that is, the motor vehicle directly enters the inner circle to drive, and then at an intersection in advance, turn on the right turn signal and drive away from the outer circle.

The right turn signal should be turned on before the vehicle exits the roundabout. When a motor vehicle leaves the roundabout, it needs to change lanes in advance, and it is also necessary to turn signals in advance. When exiting the roundabout, you must first turn right turn your lights and observe the movement of vehicles and pedestrians on the right.

If there are two or more lanes at the roundabout, when leaving the roundabout, turn right and turn to the outside lane. It is forbidden to drive directly out of the roundabout from the inner lane.

The correct way to drive a motor vehicle at a roundabout:

1.When driving into the roundabout, be sure to look at the road conditions. If the driver is not familiar with the road conditions at the roundabout, slow down and pay attention to the road signs.

Even if the driver misses the exit inside the roundabout, don't worry, because the island is a circle and you can drive around the island one more time to find the exit.

2. When driving a motor vehicle around the island, be polite and cooperate with the driving of vehicles entering the island and vehicles leaving the island; Vehicles outside the roundabout should give way to vehicles inside the roundabout; Turning vehicles to give way to vehicles going straight; The vehicle behind gives way to the vehicle in front.

Drivers do not need to turn on their turn signals when driving at roundabouts, as roundabouts are usually built at traffic interchanges. After entering the roundabout, the vehicle is in a straight state and does not need to turn on the turn signal function. In the roundabout, if the driver needs to change lanes, he or she needs to turn on the left turn signal to change lanes under the condition of ensuring road safety.

When exiting the roundabout, the driver needs to turn on the right turn signal in advance and then exit the inner lane of the roundabout and enter the outer lane of the roundabout before the vehicle can leave the roundabout. When driving on a roundabout, drivers need to control their speed and observe the driving dynamics of vehicles on both sides to avoid unnecessary traffic accidents.

Legal basis

Article 57 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China Motor vehicles shall use turn signals in accordance with the following provisions:

1. When turning left, changing lanes to the left, preparing to overtake, leaving the parking place or making a U-turn, the left turn signal should be turned on in advance;

2. When turning right, changing lanes to the right, returning to the original lane after overtaking, and parking on the side of the road, the right turn signal should be turned on in advance.

Before entering the roundabout, the vehicle should turn on the right turn signal. When leaving the roundabout, you need to turn on the right turn signal again.

Huandao Road. Generally at the intersection, the traffic is busy, there are more motor vehicles in and out, in order to drive safely, remind the passing vehicles to pay attention to safety avoidance, such as entering the roundabout before the motor vehicle should turn on the right turn signal, in the roundabout driving in the rolling family of motor vehicles are preparing to go down.

Therefore, before the motor vehicle is ready to go down, it should turn on the right steering premature light in advance to remind other motor vehicles to pay attention to avoidance, because the driving speed should be appropriately reduced when turning down, and turning on the turn signal is to prompt the following motor vehicle to slow down and avoid.

When passing through the roundabout, the use of turn signals is as follows: 1. If you want to turn left when entering the roundabout, you should choose the left lane in the roundabout.

Because the vehicle should cut into the inner road from outside the island, the vehicle should use the left turn signal when entering the roundabout, indicating that the vehicle on the island and the rear car "this car will cut the inner road and turn left". When driving out of the roundabout, turn right in advance, change lanes from the inside lane to the outside of the roundabout after confirming safety, and finally drive out of the roundabout. 2. Go straight into the roundabout:

Vehicles should go straight and choose the middle lane inside the roundabout. Because the vehicle does not need to change lanes after entering the roundabout, the vehicle does not need to hit the left turn signal when entering the roundabout; However, when the vehicle is ready to drive out of the roundabout and continue to go straight, it must cross the right lane in the roundabout, so you should use the right turn signal to remind other vehicles to pay attention and drive out of the roundabout after confirming safety. 3. Enter the roundabout right**

If you want to turn right to other intersections, you can choose the right lane inside the roundabout, or you can choose to turn right outside the roundabout. When the vehicle enters the roundabout, the situation is similar to that of going straight, so there is no need to use the left turn signal; However, when the vehicle chooses the corresponding intersection, it should use the right turn signal in advance to confirm the safety and turn right out of the roundabout.