How to deal if the screen of the electric heating stove is not lit?

<> Inovi smart solar electric auxiliary heating.

This is a screen not lighting effect.

This is the screen lighting effect.

If the screen is not lit, please check whether the heating is still hot, touch the screen with your hand, whether it is lit up, and make treatment methods according to these two items.

1. The heating is still hot, touch the screen and light up: the system is normal at this time, the screen itself has a screen protection function, and the screen will be extinguished if no one operates it for more than 30 seconds.

2. The heating is not hot, touch the screen and light up: at this time, check the lower left corner, whether the display system is turned off, if the display system is off, click lightly to turn it on.

<>3. The screen is still not lit after touching it, don't deal with it first, call ** to the company's maintenance station, report for repair, I believe they will deal with it for you.

4. Make sure that there is no water ingress into the host, if the water is ingress, immediately turn off the leakage protector, call the company's maintenance station, report for repair, I believe they will deal with it for you, at this time remember not to do any operation, and truthfully inform the maintenance personnel to deal with it, remember not to conceal it, concealment will lead to incomplete treatment, and bury hidden dangers for accidents.

Because the temperature set by the electric heating stove reaches the temperature it is scheduled to set, it is no longer heating, so the lights will go out, the screen will not be on, and when it is heated, the lights will turn on normally!

If this problem is ruled out, it means that there is a mechanical fault inside the electric heating furnace, which needs to be checked and repaired by a professional master!

Let's start by saying that the radiator is not hot.

Phenomenon: The radiator is not hot.

Check the target temperature of the room and the actual temperature, if the target temperature is reached, it is normal, the system setting is to reduce the radiator heat dissipation and heat preservation when the target temperature is reached, and the radiator temperature is not very hot at this time.

Phenomenon: The radiator is not hot, and the room is not hot.

2. Check the target temperature of the room, if the target temperature of the room is too low, modify the appropriate target temperature, and the system will automatically run to the target temperature of the room.

3. Check whether the operation mode of the basic check system is in a closed state. If yes, modify it to the appropriate mode.

It's not normal, it means that you have a problem, and you have to find a maintenance person to help you take a look.

The red light can be seen on the back, and the front is very weak, which is normal.

When the light is first powered on, it will flash several times quickly to indicate the address value of the module, which is used to verify whether the correct code is correct when the module address is set.

After normal operation, it will flash once in about 3-4 seconds, which is used to judge the working state of the system, if it does not flash for more than 10 seconds, there may be a problem with the mold delay blind block, and it is necessary to contact the manufacturer to replace it.

Ainovi smart sun friends shouted energy and electricity auxiliary heating.

This is the back, and from this direction, the light flickering is more noticeable.

Ainowei smart solar electric auxiliary heating.

This is the front, and this direction light flashes very weakly, reducing the disturbance of people at night.

The Inovi electric heater panel has a red light that flashes back and forth.

<> Inovi smart solar electric auxiliary heating.

According to the description, I feel like this.

Click on the information view from the home page, open the information view page, and then click on the alarm message again, and this page will appear. This page is for maintenance personnel, and some common problems are recorded in this **, which is used as a reference when repairing.

Ordinary users do not need to view this information, and the alarm information given to users is displayed through the following alarm page, which does not mean that there is a problem with the device.

<> Inovi smart solar electric auxiliary heating.

Now all household appliances are intelligent, he is with external induction, well, it is based on the induction to determine the temperature of each room in your home, he will bring intelligent adjustment.

Is this the warning page below?

<> Inovi smart solar electric auxiliary heating.

This situation is generally caused by the high temperature of the boiler inlet and outlet water, and the reason is generally.

1. There is no water in the heater, please check the water tank with infiltration, and add water immediately if there is no water in the hall.

2. If the temperature sensor is faulty, it is recommended to contact the maintenance station for replacement.