How to protect wet ground from moisture? How can the ground be moisture proof?

Moisture-resistant primers are applied to humid environments, wet floors, and poorly ventilated working environments, which can effectively prevent moisture. Jinan Jin Shunyu.

Hello, there are probably the following methods for the practice of ground moisture-proof: (1) waterproof mortar ground moisture-proof layer at the position of the moisture-proof layer to wipe a layer of 20mm or 30mm thick 1:3 cement mortar mixed with 5% waterproof agent to make waterproof mortar; It is also possible to use waterproof mortar to build 4-6 skin bricks, which are located above and below the indoor floor.

The use of waterproof seepage mortar is more suitable for buildings with seismic fortification requirements. (2) Linoleum ground moisture-proof layer, first wipe a 20mm thick mortar leveling layer at the moisture-proof layer, and then dry-lay a layer of linoleum or paste one felt and two oils with hot asphalt. Linoleum is the same width as the wall thickness, laid along the length, lap length loomm.

The linoleum moisture-proof layer has certain toughness, extensibility and good moisture-proof performance, but it is easy to age and fail over time, and at the same time, because the linoleum layer reduces the cohesion between the upper and lower brick masonry, thus weakening the seismic ability of the brick wall. (3) The moisture-proof layer of fine stone concrete ground uses the characteristics of good concrete compactness, certain waterproof performance, and can be combined with masonry, and is commonly used with 60mm thick reinforced fine stone concrete moisture-proof belt. This practice is suitable for buildings with high overall stiffness requirements.

4) vertical ground moisture-proof layer, the vertical wall surface of the vertical bush field with the height difference part of the indoor floor of the room, in addition to setting up the upper and lower two horizontal moisture-proof layers, this vertical wall surface (on the side of the fill) is first plastered with cement mortar, brushed with cold bottom oil, and then brushed with hot asphalt twice; It is also possible to use the practice of plastering with mortar mixed with waterproofing agent, and the other side of the wall requires the plastering of the wall with cement mortar as the base. Hope it helps.

How can the ground be moisture-proof, I believe everyone should know that the moisture in the southern region is relatively heavy, so it is easy to get damp inside the house. Let me share with you how the ground can be moisture-proof, and interested friends should come and find out about it.

How can the ground be moisture-proof?

1. The ground is damp, and some dehumidification products can be used for adsorption, and reasonable placement can be carried out in each space, which has a certain preventive effect on space moisture-proof, so that indoor items can be kept dry at any time and mildew and odor can be reduced. Generally, activated carbon or special dehumidification packs are used, and these products can be purchased in household stores, which are not too expensive. We can also put some mothballs on the inside of the wardrobe, not only to prevent moisture, but also to prevent insects from crawling in and damaging the clothes.

2. Indoor moisture-proof can also be prevented by using a special dehumidifier or air conditioner to fully drain the indoor water vapor and keep the indoor air dry. However, the dehumidification effect of the air conditioner is relatively slow, and it often takes two or three hours to see results. On sunny days, we can also open windows for ventilation to reduce the feeling of humidity in the room.

3. Buy some waterproofing agent directly on the surface of the tile for a spraying, which can ensure that there is no leakage for life. But pay great attention to some details, such as the roots of pipes, walls, and other objects, and make sure they are in place.

4. Brush paint, you can buy waterproof materials.

5. When paving the waterproof coating, it should be painted evenly, and there should be no missing brush, bulging and falling off, and the thickness of the waterproof coating layer should not be less than, otherwise it will affect the waterproof effect.

What are the moisture-proof materials on the ground?

1. Waterproof mortar

Waterproof mortar is one of our most common moisture-proof materials, using a special moisture-proof layer in the mortar to effectively isolate water vapor on the surface of the mortar. Generally, waterproof mortar construction, with a thickness of between 2 cm, is then reinforced and painted with asphalt.

2. Tiles

Ceramic tiles also have a certain effect on the ground moisture-proof, there are ceramic tiles fired by clay at high temperature, the surface gap is small, not easy to absorb water, effectively block the penetration of water vapor. But when we buy, we need to test the water absorption rate of the tile, and we should also see whether the glaze layer is delicate, and the tile that is more crisp is better.

3. Waterproofing membrane

Waterproofing membrane is also a more common moisture-proof material, suitable for various space ranges, as a new flexible material made of special materials, has a very significant effect on waterproof and moisture-proof. Since the membrane is mainly made of asphalt as raw material, it is extremely water-resistant, bendable and not easy to crack.

4. Coating

Moisture-proof coating is also our most common moisture-proof method, mainly water-based materials and polymer materials, after special processing of the coating, not only has good performance characteristics, in addition, in the construction, can be directly constructed, the adhesion is very strong, greatly improve the moisture-proof property of the ground. In addition, a special protective layer is formed on the surface, so that the ground is not easy to seep water, and it is also very easy to maintain.

1. If the ground is particularly damp, then we must pay attention to whether it is because of the moisture outside, and the doors and windows must be closed in humid weather. 2. You can also buy desiccant and other products, and put the desiccant on the ground for dehumidification. If there is no desiccant, laundry detergent and quicklime can also play a certain role in moisture prevention.

3. We can also use dehumidifiers, air conditioners and other electrical appliances to help, because most air conditioners have the function of dehumidification.

Now, most families will choose to do a ground moisture barrier, and the specific method of ground moisture barrier is about three steps. First of all, the dirt and gravel on the ground are cleaned up, and if the floor tiles are loose, we need to rebuild the bricks. Secondly, the edge of the ground is plastered with a moisture-proof layer, the thickness of the moisture-proof layer should be at least 20 mm, after wiping, the surface of the mortar is smoothed, and then wait for the surface to slowly dry out, after drying, it needs to be applied again, at least two or three times.

Finally, use three layers of asphalt and two layers of linoleum paper, and then smear a layer of cement on it, mainly to prevent the release of harmful gases with cement, and then lay a layer of moisture-proof film after it is completed. The ground moisture barrier can be well protected from moisture on the ground and can be used in decoration.

Summary. Hello, you can place limestone indoors to prevent moisture, limestone is a better desiccant. At the same time, it can also spread waste newspapers on the ground, which can also have a good moisture absorption effect and keep the indoor air dry.

2. You can light candles in the damp place of the floor, which can effectively reduce the humidity in the room, if the musty smell at home is relatively large, you can also choose natural plant aromatherapy, which can effectively remove the musty smell in the air. 3. Or you can also use air dehumidifier to carry out, and the effect of dehumidification and dehumidification is very good.

Query the results for you, query the results for you, hello, you can place limestone indoors to dress up for moisture, limestone is a better desiccant. At the same time, it can also spread waste newspapers on the ground, which can also have a good moisture absorption effect, and can keep the indoor air smoldering and dry. 2. You can light a candle on the floor of the damp ground worm, which can effectively reduce the indoor humidity, if the musty smell at home is relatively large, you can also choose natural plant aromatherapy, which can effectively remove the musty smell in the air.

3. Or you can also use air dehumidifier to carry out, and the effect of dehumidification and dehumidification is very good.