Home in the humid area of the south, how to choose the floor to better prevent moisture?

Generally speaking, the location is not suitable for assembling wood flooring, because the wood is very easy to return to moisture, and then cause a series of bad conditions such as mold, deformation, swelling, etc., for example, the gas in the south is more humid in winter, especially in the case of rain and rain, at this time, the solid wood board or composite wood floor at home will change the probability of moisture, so as to crack, more serious and even mildew. But those can not stand everyone's enthusiasm for wooden flooring, and wooden flooring is very advantageous in many fields, therefore, if you choose to install wooden flooring, how to waterproof the wooden floor, is particularly important.

Important 1: Pay attention to waterproof countermeasures when assemblingIn general, solid wood flooring is very easy to return moisture than composite wood flooring, so when laying, it is best to add a layer of moisture-proof film at the bottom end, although the cost of this kind of processing technology has risen, but it can be guaranteed for life. Important 2:

The maintenance method in the middle and later stages is very important: 1. Usually some items that can be affected by moisture can be placed in the room, such as charcoal, dehumidifiers, etc., which can solve the slightly wet and cold situation that sometimes occurs. After the wood floor is applied for a period of time, it must be polished and waxed again, which can not only volatilize the residual moisture of the construction project, but also increase the service life of the wood floor.

Built-in appliances such as home dehumidifiers, such as home dehumidifiers, can solve a variety of wet and cold conditions. Compared with organic chemical damp methods such as dehumidifiers, dehumidification bags, lime powder, etc., its advantages depend on the fact that dehumidification is not limited to small indoor spaces, but is dehumidification of the whole space, and the effect is fast, and the dehumidification is effective, as long as the equipment does not have common faults, it does not need to be replaced; In addition, long-term can not only solve the sometimes mild damp and cold conditions, but also solve the long-term and perennial damp and cold conditions that cannot be handled by other dehumidifiers, such as basement dehumidification, wine kiln dehumidification, etc., and its very obvious damp and cold conditions, such as the rainy season, water vapor solidification in the room on southerly days, etc.

Wood flooring should be polished and waxed once a quarter to maintain the brightness and moisture-proof characteristics of the surface of the wood floor. Usually clean should be careful not to spill excessive water on the floor tiles, generally with a semi-wet mop to clean, after the opening of the household dehumidifier to carry out indoor drying, to ensure that the wooden floor or the objects in the room are not easy to return moisture. When the climate is relatively wet and cold, the windows and doors facing south or southeast (i.e. the direction of the induced air) should be closed as far as possible, and only the windows and doors at the lower prescription position should be opened to reduce the water vapor entering the room, or the household dehumidifier should be opened immediately to dehumidify.

When the sun is shining, all windows and doors can be opened for natural ventilation to speed up water evaporation. In the afternoon, the relative humidity of the air in the room is generally at the maximum, but the outdoor ambient humidity value is at the minimum, and indoor ventilation is appropriate. In the morning, dusk and evening, the outdoor ambient humidity value is at the maximum value, and the indoor ventilation should pay attention to the time.

1. Keep a ventilated and dry environment.

We can keep the room ventilated regularly, which can not only make the chemicals in the floor as volatile as possible and discharged to the outside, but also allow the humid air in the room to be exchanged with the outside. Then especially in the case of long-term unoccupied and maintained, indoor ventilation is more important. So what we commonly do is:

Open windows or doors frequently to allow air to circulate, or use air conditioning and ventilation systems to create a dry and clean environment.

2. Maintain the wooden floor regularly.

We can wax the wooden floor, waxing can not only make up for the scars left on the wooden floor in daily life, improve the brightness of the floor, but also the wax itself has the function of waterproof and moisture-proof. In fact, the number of waxing can vary depending on the old and new floors, the new wooden floors are beaten every half a month or a month, and after 3 or 4 waxes in a row, you can wax every six months. In addition to waxing, we can also regularly maintain the floor with essential oils to enhance the stability of the floor and avoid absorbing moisture.

3. Correct cleaning and care methods.

We pay attention to controlling water consumption in cleaning, and in the daily maintenance of the floor, in fact, cleaning is a necessary item. Because the humidity of the rainy weather is large, it is not suitable to mop the floor with water or a damp mop, so as to avoid excessive humidity on the floor, the general stains can be treated with a soft dry rag, and the stains must be cleaned with water. So we recommend using a cloth that has been soaked and wrung out until it does not drip clean.

Open the doors and windows immediately after the floor has been plastered, let the air circulate, and blow dry the floor. In humid weather, you can wipe it again with a dry cloth and then use an air conditioner to dehumidify.

If the southern region is more humid, try not to choose wooden flooring, but choose marble or tile flooring, which can better prevent moisture and not easy to corrode.

Try not to choose wooden flooring when choosing flooring in humid areas in the south, because the moisture-proof effect of wooden flooring is not as good as tiles, and the moisture-proof effect is good, so try to choose ceramic tiles.

Choose a moisture-proof floor, and when laying the floor, lay a moisture-proof film on the ground, which can effectively block the humid air, which is better for the floor and the family.

1. Quicklime moisture-proof. It can absorb water vapor in the air and turn it into calcium hydroxide, which keeps the indoor air dry. Quicklime will melt after moisture absorption, and should be replaced in time.

2. Light a candle. In the bedroom or living room with flooring, light the aroma to save energy and effectively dry the air, and get out the musty smell in the room. Lighting candles prevents water vapor from condensing, thus reducing indoor humidity.

3. Dried chili peppers, cannonballs, braziers. Place dried chili peppers to absorb a certain amount of water, but be sure to replace them with new dried chili peppers frequently; Place a reliable quality cannonball, because there is sulfur in the cannonball, which can not only dehumidify but also remove insects. You can burn a stove in the room to raise the temperature in the room so that the water vapor cannot condense, thereby reducing the humidity in the room.

4. Enter the door to change shoes. Before entering the door, you should change into dry slippers or dry the moisture from the soles of your shoes to avoid bringing moisture into your home from the outside. At the same time, it is also necessary to develop good habits and pay attention to personal hygiene at home.

For example, do not pour the waste water in the cup on the tiles, step on the soles of your shoes after going to the bathroom and then enter the living room, etc., and keep the tiles dry at all times.

5. Spread waste newspapers at the door. When the damp "Huinantian" hits, in addition to closing the windows of the home, spread waste newspapers on the ground of the "wet entrance" such as the door, bathroom, and kitchen door, which can not only absorb the water on the ground, but also wipe the water on the shoes, killing two birds with one stone.

The method of moisture-proof flooring is simply to lay a moisture-proof mat at the time of installation, and then lay the floor, which is a common moisture-proof method.

To complicate it, it is that we need to carry out dry and wet partitions when decorating, and do a good job of waterproofing, especially in areas with more water such as kitchens and bathrooms.

In addition, in spring and summer, there is a lot of water, and closing the doors and windows is also a way to avoid moisture on the floor.

Hello, the method is as follows:1Reasonable window ventilation:

Close windows during the day and at night to reduce indoor humidity. In humid climates, walls can be very damaged, so be prepared to protect against moisture. Always remember to keep the windows of your home closed.

This way, no moisture will penetrate in. In the morning and evening, the moisture content of the air is higher than at noon, and if you don't close the windows in time, the moisture in the air will take advantage of it. You can choose to open the window for a short time at noon.

2.Mop the floor with warm water: add more salt.

First, bring the water to a boil until it's not hot, add a teaspoon of salt, stir it a little until it melts completely, and then you can start mopping the floor. This is because, the rate of evaporation of the liquid is related to the temperature, the temperature is high, the volatilization is fast, and the floor is wiped with hot water, of course, it will be faster. In addition, magnesium chloride and calcium chloride in salts have strong water absorption, and they will become fine particles after drying on the ground, which can keep the soil dry for a longer time.

3.Apply a water-repellent coating. The PU coating itself is capable of forming an elastic protective film with a certain tensile resistance.

The waterproof coating should be applied evenly, and there should be no missing brushes, bulging, peeling, etc., otherwise the waterproof effect will be affected. The yin and yang corners and the root of the pipe can be coated with another layer.

Nowadays, people love to lay flooring at home, but usually due to improper maintenance and other problems, it is often easy to cause the floor to be damp. As we all know, if the floor is damp and not treated in time, the consequences will be serious, and even rot. Therefore, it is necessary to avoid the appearance of damp floors.

So, how exactly do you avoid the floor from getting wet? Let's talk about the main ways to avoid dampness on the floor, let's take a look!

1. Close the window at the right time.

When the humid air hits in the spring, be sure to close the windows in your home, especially those facing south and southeast. The important period of moisture prevention is in the morning and evening, when the air humidity is higher than at noon, and if the doors and windows are not closed in time, the moisture will seriously penetrate into every corner of the home, resulting in damp floors.

2. Clever use of air conditioning.

The most convenient way to prevent moisture in the room is to use a dehumidifier or turn on an air conditioner to extract moisture from the air. The use of air conditioning to change the environment of indoor air is a good way to prevent moisture at home.

3. Skillfully place desiccant.

Now there are many desiccants on the market that are specially used for moisture prevention and dehumidification, and if placed reasonably, they can also receive a good effect of preventing moisture. There are two common types: moisture absorber box and dehumidification bag.

Lay the flooring at the right time.

1. Select the paving time and environment: The material of the floor itself is natural wood, and the requirements for ambient temperature and humidity are relatively high. Generally, the temperature of the flooring is between 16 and 30 is more suitable, so that the wood flooring can be kept in the best natural condition.

In terms of season, spring and autumn are more suitable than summer and winter. 24 hours a day, try to avoid midday and evening work, preferably after 2 p.m.

2. Reasonable arrangement of decoration construction: the process of floor paving should be carried out after the completion of all basic decoration construction, so as to avoid damage to the laid floor during other construction. Especially after the completion of painting, tiling and other construction, do a good job of site sanitation before you can start laying.

If the space where the floor needs to be painted, you can also reserve the last painting when painting the wall paint, wait until the floor is paved, and then apply the final wall paint, wait for the slow wall paint to dry thoroughly, and then finally install the baseline of the floor.

Method Step 2:

The floor is moisture-proof, so you can be prepared.

1. Moisture-proof treatment of materials: The flooring material should be stored at room temperature for two days before paving. For better protection from moisture, the floor should be stored in a ventilated and dry place and protected with plastic film.

Floors that have been damp are more likely to become moldy, and their service life will be greatly shortened, so they cannot be dried for reuse. The purchased floor is also treated with moisture protection before being laid. Apply a layer of moisture-proof protective paint to the reverse side of the floor to prevent the dampness of the paved floor from affecting the floor, resulting in a hollow floor.

2. Ground treatment before paving: ensure the cleanliness of the ground and floor before installation. If necessary, brush a layer of thin cement slurry to remove stains from the floor before paving, and wait for the cement to dry before paving.

In order to ensure that the floor is protected from moisture, the floor must be waterproof and moisture-proof, especially in the space near the kitchen and bathroom.