What about terrazzo floors? Advantages and disadvantages of terrazzo flooring

The advantage is that it is more beautiful, and the disadvantage is that it is not good to look after a long time.

Is terrazzo flooring practical? High strength and abrasion resistance. This is a crucial factor in the selection of terrazzo flooring in many pot lovers' homes.

After the terrazzo flooring is finished, it is very strong, which has a great advantage compared with their wooden flooring, and it is not much far from the floor tiles. Like the terrazzo flooring that we have now, the strength has reached four to five levels. What does this mean?

It shows that the strength of terrazzo flooring is basically the same as that of natural marble granite. Therefore, there is no problem in applying terrazzo flooring in the home.

Anti-fouling, the effect of anti-slip on the ground is obvious. In fact, the key lies in the performance of the terrazzo floor itself and the characteristics of its operation. Because terrazzo flooring is made of raw materials and polished by grinding, its anti-slip characteristics are very high-quality.

If you compare it with the floor tiles, you will find that the terrazzo floor is particularly non-slip. In addition, in the case of terrazzo flooring, there is no gap in the middle, which is a very big advantage compared with floor tiles. Therefore, terrazzo flooring is very convenient to clean and hygienic.

It is not like the floor tiles have a lot of gaps, and if there is dust in the gaps, it is not easy to clean.

What are the advantages of terrazzo flooring? The maintenance of terrazzo floors is very simple. It can be said that the terrazzo floor at home is almost not used, and it can be used normally without deliberate maintenance.

Like many of our homes, we usually use a mop to mop the terrazzo floor, and it is very clean and clean. Compared with the floor in our home, this is also a very great advantage. For example, pure solid wood flooring, especially pure solid wood flooring, must be well maintained, otherwise it will look worn out or even damaged after a long time.

There are also some floor tiles that are polished by glaze polishing, if they are not maintained for a long time, the appearance will become more and more dull, which is not good-looking. But terrazzo floors are particularly good.

Terrazzo floors have a very long service life. I don't know if you have done terrazzo floor pavement in your home, so to speak, after the terrazzo floor is made, you basically need to use it for the next interior decoration. In other words, it will take more than ten years, and there is no problem.

The situation that you can see is that there may be slight gaps in the terrazzo floor, which is actually caused by unreasonable engineering construction, but there is no harm in the service life. As for floor tiles and floors, because of the paving or the factors of the raw materials themselves, the service life of these is actually not as long as that of terrazzo floors.

It's very practical, and it's very simple to clean, and the pattern is relatively simple. The advantage is that it is very convenient to clean, and there will be no accumulation of dust, the cleaning effect of the ground is better, and it will make the ground look more gorgeous, and it will also make the decoration effect of the home look simpler.

Not only is it very practical, but it is also very beautiful. The advantage is that it is very convenient to clean, and it is not easy to accumulate dust, the effect is very good, and the decoration method is very good, which can save costs.

Personally, I think terrazzo flooring is very practical, not only cheap and cost-saving, but also relatively strong and durable when used, especially when cleaning in the later stage, it is also very easy.

First, the advantages and disadvantages of terrazzo floor.

After the terrazzo floor is high-brightened, its high brightness reaches more than 70, and it also has the functions of dustproof and anti-slip. The surface of high-gloss terrazzo with high-gloss treatment is hard, and its hardness can reach 6-8 grades. When making high-gloss terrazzo, it can be spliced at will according to the preferences of consumers, and its color can also be customized.

The terrazzo floor is not afraid of heavy dragging, nor is it afraid of heavy truck rolling, and even if there are these conditions, it will not crack, and it will not shrink and deform. The terrazzo floor is resistant to aging, fouling, and difficult to burn, and has no peculiar smell and no pollution.

Terrazzo is made of concrete, so its weight is relatively heavy, the weight of a cement stone is about 5kg, the bigger the bigger the weight, so it is very laborious to carry it too early. Terrazzo flooring cannot be used in highly corrosive locations, which will cause severe corrosion of terrazzo flooring, resulting in a shortened service life. There are many voids in the terrazzo floor, and if there is a stain in water, it will penetrate under the ground, thus contaminating the terrazzo floor, and it is more difficult to clean.

Second, terrazzo ground construction process 1Do the screed.

The screed is made of 1:3 dry hard cement mortar, which is then flattened and then compacted and smoothed.

2.Lattice bar inlay.

After that, it should be plastered with cement to form a figure-eight corner through the long seat, and it must be firmly embedded. In this construction stage, it should be noted that the coating height of the cement slurry should be about three to five millimeters lower than that of the lattice strip, the joints should be tight, and the top surface should be in the same horizontal plane, which requires relatively high construction skills.

3.Plastering the surface layer of stone slurry.

When wiping the mud and stone slurry, it should be proportioned according to the requirements, and the stone slurry surface should be at least swept with hair twice to open the batter, and only after the stone particles are uniform can it be smoothed and compacted with an iron trowel until the slurry is spread. It should be noted here that the ripples must be flattened, and the stones on the top surface of the lattice strip must be cleaned up.

4.Burnish. If the terrazzo ground construction area is large, then a mechanical stone machine should be used for grinding. For small areas or corners, a small portable mill can be used for grinding. For parts where mechanical grinding is not possible, manual grinding is possible.

Terrazzo is a traditional concrete product, the weight of a terrazzo floor is about 5kg, the larger the terrazzo floor, the heavier the weight, making it very time-consuming and laborious in the handling process. Moreover, it has poor corrosion resistance, and there are many voids in the middle of the floor, which can not only hide dust but also suck in dirty water, which is very difficult to clean.

Terrazzo materials are gradually being withdrawn from the market, replaced by Norman wear-resistant flooring. Wear-resistant flooring has the advantages of high surface hardness, high density, wear-resistant, no dust and sand, no shedding, economy, applicability, and wide range. The concrete base and the wear-resistant surface layer form a whole, which eliminates the quality problems of cracks and hollowing caused by the poor combination of the base and the surface layer, shortens the construction period, saves labor costs, and is more and more widely used in factories, warehouses, runways, docks and other projects.

Compared with terrazzo flooring, it has the advantages of low cost and easy maintenance in the later stage. If the floor of the factory is a floor that requires high wear resistance, the wear-resistant floor is the best choice. Wear-resistant flooring is used as factory floor treatment with the advantages of impact resistance, high wear resistance, dustproof, and improving the grease resistance of the ground, which is suitable for the surface strengthening treatment of floor slabs and mortars with various wear-resistant and dust-free requirements, especially for the ground that requires very high resistance to mechanical wear.

Therefore, if it is a highly wear-resistant factory floor treatment, it is appropriate to choose a wear-resistant floor. Wuhan Norman Building Materials **** for you tailor-made emery wear-resistant flooring can relieve your worries, save money, time, and effort, and create a clean and healthy working environment for you.

Wuhan Norman focuses on R&D, production and construction of various types of industrial floor coatings, nationwide contracted labor and material door-to-door service, providing two-year warranty, and has provided services for more than 1,000 enterprises so far