If the decoration can be repeated, which 5 don ts must be adhered to when tiling and plaving?

Don't tile the whole room, don't put the tiles together with the floor, don't use golden seams, don't use tiles of small colors, don't use tiles that are too absorbent.

Be sure to find a professional, don't listen too much to other people's opinions, just like yourself.

There are many things that need to be paid attention to in the process of tiling, and the large and small matters are done, and the tiles will look good. 1. Check the foundation treatment of the wall and ground before paving, to see whether the foundation treatment of the wall and ground meets or meets the requirements of paving tiles, if it does not meet, it needs to be rectified and repaired first, such as no brushing needs to be brushed first; 2. Before tile paving, pay attention to the corresponding finished product protection work to prevent damage to other items in the process of tile handling and paving; Such as the protection of windows, waterproofing, water and electricity laying pipelines, etc.; 3. When using cement mortar to pave tiles, the dry base should be sprinkled first to prevent it from absorbing the water in the cement mortar too quickly, resulting in hollowing and delamination of the tile paving. 1. The base should be cleaned before tiling, such as lime paste, latex paint, wallpaper and other decorations on the wall, or there is dirt on the ground, it must be cleaned up, otherwise the cement mortar and the base are not firmly bonded.

2. The floor tiles should be pasted from the inside to the outside, if the ground has a slope or a floor drain, attention should be paid to finding the slope according to the drainage direction; The wall tiles should be paved from the bottom up, and for the sake of aesthetics, the bottom bricks should be pasted later. After the wall tiles are pasted, press the floor tiles, and when there is half a brick, it should be placed below as much as possible. In addition, a wall should not be pasted to the top at one time to prevent the tile from falling due to its large weight.

3. Wall tiles have a high moisture content, and this characteristic must be taken into account when pasting. The base layer should be fully watered and moistened before tiling, and the tiles should also be soaked in water for at least 20 minutes before use.

Ceramic tiles are very important when decorating interiors; When pasting tiles, you need to pay attention to not to have empty blockages, and you must keep them clean, and you need to pay attention to these problems.

Tiles are particularly important, first of all, choose their quality and color, it can play a great role in making your room brighter; We have to look at its size, it can't be particularly wasted, it needs to be soaked in water, so that it is more compact.

is very important; When decorating the interior, we must pay attention to choosing some better tiles, and we must choose professional personnel when pasting, do not leave gaps, and do beautiful seams.

1.Whether the floor tile paving is standardized or not directly affects the future use. Only in accordance with the correct paving process can the floor tiles not warp or crack.

Whether the floor tile paving is standardized or not directly affects the future use. Only in accordance with the correct paving process can the floor tiles not warp or crack. Confirm the specifications and dimensions of the floor tiles.

This is a very crucial step. If you want to design floor paving, you must first choose the right size of the floor tile. For example, the current living room is generally paved with 800mm 800mm, or 600mm 1200mm, or 750mm 1200mm to the floor tiles.

We can choose the right floor tile from these specifications and sizes.

2.For the choice of the starting position of the indoor floor tiles, the location varies according to the room. For example, in the bathroom, it is recommended that you start with the first brick from the innermost part of the bathroom and then lay it back.

For the living room or dining room, it is recommended that you go shopping from the balcony to the door. In the case of the kitchen, lay it out from the inside of the kitchen so that we can confirm the location of the first brick. For the choice of the starting position of the indoor floor tiles, the location varies according to the room.

For example, in the bathroom, it is recommended that you start with the first brick from the innermost part of the bathroom and then lay it back.

3.For the living room or dining room, it is recommended that you go shopping from the balcony to the Golden Gate. In the case of the kitchen, lay it out from the inside of the kitchen so that we can confirm the location of the first brick.

In terms of the thickness of the ground, the thickness of the mortar for dry paving is about 3 4 cm, while for wet paving, cement is applied directly behind the bricks and then spread on the wall or ground. This reduces the thickness of the ground. Don't underestimate this thickness.

For units with low floor heights, it can effectively reduce the sense of space oppression. Suitable type: suitable for European and rustic style, and the paving method is more abundant.

It is usually possible to use marble or tiles slightly darker in color than the main tile laid, enclosing the ground with an edge of about 15 cm.

4.The pavement effect makes people feel that the materials are more refined, which can better set off the atmosphere of the space. Because there are many tiny gaps inside the tiles, these gaps have a certain amount of water absorption.

If the tile is not soaked in water, it will absorb the moisture in the cement, resulting in a gap between the tile and the cement, resulting in hollowing, tile falling off and other problems. To tile the balcony, you need to brush thick mud on the basis of the original exterior wall, which will make the tiles more firm. If you don't brush, the tile can also be pasted, but it is easy to fall off during later use.

First of all, the tiles should be soaked, secondly, the relevant flat line should be found, and secondly, it is time to enter the pre-paving stage. Then find the relevant location to determine. 1:

3 ratios, so that the water and mud are fused together. You can go and soak the ground first, and you can sprinkle water.

The method is neat and beautiful, when paving, it is necessary to straighten it with a level, and then pay attention to the thickness, the tile must be beautiful, and the whole tile should be left in a large area, and then the tile should be paved on the joint.

When tiling, the wall and the ground must be laid flat, and there should be more cement slurry, so as to achieve a better effect, and the surface of the cement slurry must be scratched.

In the decoration, for the installation of the ground tile bush, if you feel that the technical content is not large, then you are indeed a layman, did not see through the hidden doorway, many things if you do not want to think about the skills are not good to do the reeds, tile paving is no exception. In the ground decoration, the paving of tiles is not as simple as it seems, and there is no doorway and skills, which is not good. So what are the doorways and skills contained in tile paving?

Read on.

1. The tiles are soaked in water as needed

If the tile wants to be paved well, it should be soaked in water before installation, but the tile manufacturers or merchants who have soaked in water generally do not return it, resulting in unnecessary waste.

Suggestion: Combined with the construction progress, how much you need to soak, don't soak it all at once.

Second, the tile should be arranged before paving

Some workers will be more blind when decorating, as soon as they get the bricks, they will find that the proportions are not coordinated, and they will be removed and re-paved, which will not only affect the aesthetic effect later, but also cause unnecessary and pure loss and waste.

Suggestion: Before paving, be sure to measure the size and do a good job of brick arrangement plan and plan.

3. Correctly mix the mixing ratio of cement and sand and select the cement number

The proportion of cement is large, and the tiles can be quickly tamped, but if the expansion coefficient of cement mortar is large, it is easy to squeeze the tiles after paving.

Suggestion: The mixed ratio of cement and sand is 1:3 for wall tiles, 1:2 for floor tiles, and good for cement labels.

Fourth, be careful in tile processing

Especially when the wall tiles touch the sunny corner, the edging should be more careful, do not destroy the glaze layer of the tile, and pay attention to the gap when connecting, not too small.

Fifth, the gap of the tile should not be too small

The ceramic tile is easy to squeeze the glaze during thermal expansion and cold contraction, and if the tile gap is too small, it is easy to reduce the service life.

Suggestion: Whether it is a tile with a gap or a tile without a gap, you must pay attention to the gap during construction.

6. Caulking should wait until the tiles are completely dry before proceeding

If the tile is not completely dry and solidified, it is easy to loosen the tile, and it is likely to fall off in the later stage, leaving potential safety hazards.

Suggestion: The grout should be carried out after the tile is dry, usually after 24 hours.

7. The wall should be cleaned before tiling

Before the wall is tiled, the putty that has been scraped before must be thoroughly removed before pasting, otherwise it is easy to cause the tile to fall off.

8. Do a good job of protection when tiling and plaving

Do not pollute or scratch the brick surface. Do not walk around on brick surfaces that are not dry and solid, as this will cause damage to the tiles.

1. The tiles should be fully soaked. 2. Use high-quality cement sand. 3. Cut tiles should be placed in the corner of the wall. 4. The location of the first brick must be selected 5. The wall must be pressed to the ground.

One is to pay attention to the size, the second is to pay attention to whether the edges are neat, the third is to be aligned with the color, the fourth is to correct in advance, the fifth is to pay attention to the material, the sixth is to mainly clean up, the seventh is to brush the mud in advance, and the eighth is to pay attention to the beauty of the seam.

1. Closed water test 2, before paving, according to the size of the whole house typesetting 3, small details of bubble bricks 4, wall pressing process 5, tile gap 6, floor drain details 7, floor tile surface flatness 8, water and electricity identification.

From the point of view of decorative effect, the chamfer "pressed strip". The tile chamfer is more beautiful and grade, with edges and corners, and the overall coordination is strong. As for the strip, to be honest, most of the colors will be very different from the tiles, the viewing degree is not enough at all, and if you want to improve the decoration grade of your home, remember to carry out anti-slip treatment.

Wives and children, husbands, children, the elderly, pregnant women, slipping and falling, big or small, will cause family misfortune. Slipping on the ground is the number one accident in the family. Pay attention to the arrangement method, the overall effect, the beauty of the paste should be considered from the firm seam and horizontal and vertical vertical, but also consider the non-slip and easy to clean.

<> bathroom because the daily water vapor is heavier, so pay attention to waterproofing when pasting tiles, you can use tile adhesive to strengthen the fit of the tiles, the wall will become worse after waterproofing, and it is easy to fall off the tiles without tile adhesive, so it is necessary to The bathroom is heavy because the daily water vapor is heavier, so you should pay attention to waterproof when pasting tiles, you can use tile adhesive to strengthen the fit of the tiles, the water absorption of the wall will become worse after doing waterproofing, and it is easy to fall off the tiles without tile adhesive. Therefore, after pasting the tiles, the carpenter can enter the field to do the ceiling wardrobe cabinets, of course, the furniture part can go, and the factory will do a good job of on-site installation, which is more trouble-free, and pay attention to the buried pipes and air outlets in advance when doing the ceiling.

Introduction to the steps of decoration construction: The first step is the transformation of the wall, that is, the bricklayer project. The second step is the transformation of water and electricity, and the arrangement of water pipes and wires in the home.

The third step is the bricklayer's tiling or the carpenter's ceiling. The fourth step is to make these things clear, and the floor should be wrapped with a protective film, otherwise the paint will be difficult to clean! At that time, because the wall was uneven, there were many layers of low ash, and there were cracks, pasted a net, called a painter to do more than ten days, and then the ceiling of the kitchen and dining room paid attention to the acceptance of tiles, horizontal and vertical, no hollow drums, no warped corners, after the bricklayer acceptance, you can contact the carpenter master to do ceilings, cabinets, bedroom doors, bathroom door measuring rulers, stone countertops, window sill plate measuring tapes.

When pasting tiles, you must buy the glue for tiles, you must not believe the opinions given by some unprofessional people, and you must ask professional masters, let these professional personnel to paste tiles for us, and do not buy some bad tile adhesive to paste.

First of all, you must choose a professional decoration team, and you must choose some waterproof tiles, after pasting the tiles, do not open the window for ventilation in a short time, and do not choose some of the smell is relatively large.

First of all, it is necessary to carry out a certain treatment on the wall, to eradicate the previous wall skin, after tiling, the tile must be soaked, so that the tile has enough humidity, and the tiling must be brushed with adhesive, when pasting must be on the joint, must pay attention to the appearance.

The problem to pay attention to is to paste from the bottom to the top, so that the tiles will not break, so when pasting, it will be more stable and the adhesion is very high.

When pasting tiles, we must pay attention to not having any gaps below, and we must pay attention to choosing better materials when buying tiles, so as to ensure that there will be no problems in the process of use.