-
The tile adhesive has thickened, can I continue to use it when I stir it with water? Why? In the engineering construction and application of tile adhesive category, it is necessary to comply with the standard that it should be used with stirring and is not suitable for mixing too much at one time.
In fact, the amount of mixing at one time should not be too much, and the total area of one batch scraping should not be too large. If there is too much mixing at one time, and the rhythm of the construction is not well controlled, it is very easy to miss the operation time. Because the tile adhesive is made of high-quality concrete, quartz sand, fiber and other raw materials, the raw materials have already produced a solidification reflection after the first water release, so it is difficult to achieve effective paving effect after releasing water.
Everyone pay attention to understand that the tile adhesive instruction manual is strictly forbidden to continue to use acrylic paint secondary water, the opening time of the general tile adhesive is 2 hours, in the case of hot and humid temperatures, it is best to stir the construction of the project, if a little stay for a period of time, it is very likely to condense and harden the bottom, which will lead to huge consumption.
The application of tile adhesive water will change the reliability of ceramic tile adhesive and make the adhesion of ceramic tile adhesive ineffective. Even in the barrel, the tile adhesive has already begun the whole process of hard bottoming, so the water content will be reduced and then the water will destroy the tile adhesive ingredients PreparationDue to the agglomeration of the tile adhesive, its related components have begun to reflect and should be discarded. Tile adhesive this kind of goods, or have to be mixed anytime and anywhere to use up is more appropriate, in the ceramic tile adhesive category of engineering construction application, a mixing amount is not too much, so even if it is not used up consumption is not more serious, there are, before the operation to do a good job of material budget, to prevent consumption, increase costs.
How to use tile adhesives; Clean the adhesive part first, and there should be no dirt such as dust inside. Then wipe the anti-crack agent in the position where the water absorption is relatively large, how to improve the moisture resistance and crack resistance of the adhesive surface. Then mix the tile adhesive according to the specified proportion and mix it well with a stirring device.
Finally, rub the adhesive on the back of the tile and stick it to the wall or floor.
-
The tile adhesive that has been prepared can not be reused with water, because the tile adhesive is made of high-quality cement, quartz sand, cellulose and other materials, and the material has undergone a hydration reaction after adding water for the first time, so the water can not be added to achieve a good paving effect. ”
-
It is not possible to add water for secondary use, because this cannot achieve a good brick-laying effect, and the decoration is ugly.
-
It is very important in the process of tile adhesive decoration, if you find that the properties of ceramic tile adhesive have changed, you need to go through simple treatment before you can continue to use.
-
Tile adhesive, also known as tile adhesive, is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, floors, toilets, kitchens and other building decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.
Add water to the tile glue, and then use an electric mixer to stir evenly until it is a paste without flour balls. However, the following points need to be paid attention to to avoid the problem of poor tiling because the simple steps are not done well.
First, the tile adhesive can not be stirred on the ground with a hand shovel. This is the traditional mixing method of cement and sand, and tile adhesive cannot do this. Because of this uneven mixing, the active ingredient will also be lost, and the adhesion will be greatly reduced.
Second, tile adhesive can not be added to cement, sand and other substances. This will change the product ratio, can not guarantee the quality of the paste, and is easy to lead to the hollowing and falling off of the tile.
Third, tile adhesive can not be used in water. Cement because of the water retention is not good, to use it in this way, but the tile adhesive must not do this. Otherwise, the tile adhesive will easily lose its strength and adhesion.
Fourth, the tile glue can not be reused with water when it is dry. The tile adhesive that has not been used up but has no stickiness and dry surface must not be used again and must be thrown away, otherwise it is easy to fall off the brick due to poor adhesion.
-
Summary. The tile adhesive still remains sticky after a day may be due to the following reasons:1
Humid weather: Tile adhesive will maintain a high humidity in a humid environment, resulting in the glue still remaining viscous. 2.
The temperature is too low: If the ambient temperature is too low, the tile adhesive may take longer to dry. As a result, the glue remains sticky even after a day.
3.Uneven mixing: If you don't stir enough during the mixing process, the ingredients in the tile adhesive may not be evenly distributed.
This will result in the glue remaining sticky after a while because the ingredients are not well mixed. If the tile adhesive still remains viscous after a day, it is advisable to check whether the environment is too humid or too cold. You can also re-stir the glue to ensure that the ingredients are well mixed.
If the tile adhesive does not dry for a long time, or if other abnormalities occur, please consult a professional.
The tile adhesive still remains viscous after a day may be due to the following reasons: Manuscript change Yu 1Humid weather:
Tile adhesive will maintain a high humidity in a humid environment, causing the glue to remain viscous. 2.The temperature is too low:
If the ambient temperature is too low, the tile adhesive may take longer to dry. As a result, the glue remains sticky even after a day. 3.
Uneven mixing: If there is not enough keying rock stirring during the mixing process, the components in the tile adhesive may not be evenly distributed. This will result in the glue remaining sticky after a while because the ingredients are not well mixed.
If the tile adhesive remains viscous after a day, it is advisable to check whether the environment is too humid or too low. You can also re-stir the glue to ensure that the ingredients are well mixed. If the tile adhesive does not dry for a long time, or if other abnormalities occur, please consult a professional.
Can you add, I don't quite understand it.
The tile adhesive still remains viscous after a day may be due to the following reasons: Manuscript change Yu 1Humid weather:
Tile adhesive will maintain a high humidity in a humid environment, causing the glue to remain viscous. 2.The temperature is too low:
If the ambient temperature is too low, the tile adhesive may take longer to dry. As a result, the glue remains sticky even after a day. 3.
Uneven mixing: If there is not enough keying rock stirring during the mixing process, the components in the tile adhesive may not be evenly distributed. This will result in the glue remaining sticky after a while because the ingredients are not well mixed.
If the tile adhesive remains viscous after a day, it is advisable to check whether the environment is too humid or too low. You can also re-stir the glue to ensure that the ingredients are well mixed. If the tile adhesive does not dry for a long time, or if other abnormalities occur, please consult a professional.
-
It can be sticked, but it is not recommended to use it on the floor of the bathroom; It's best to use it on the wall, but it won't take long for it to fall off. Porcelain white glue has a waterproof effect, but it is generally only used in small areas such as washbasins, cabinets, and glass windows. However, if the ground orange is a cement floor, it is generally not suitable for use, and the amount is estimated to be very large, and the cost is relatively high.
If the ground is wet for a long time, it is not possible to use porcelain white glue, and the glass glue can not be firmly glued in the construction of the place where it is not dry.
-
Hello dear! We are glad to serve you to answer: cement mortar and a small amount of tile adhesive are completely unacceptable.
Cement mortar can not be added tile adhesive. Because tile adhesive contains high-quality cement, quartz sand, modified polymer and other materials, imitation and their proportions are carefully designed and blended by R&D and the team. If the two are mixed, the performance of the product cannot be guaranteed, and it will also break the balance of the bonding system, resulting in problems such as hollowing and falling tiles in the later stage.
-
1. What is the shelf life of tile adhesive?
In a cool, dry environment, the shelf life of unopened tile adhesive is 1 year. Tile gluing blocks, indicating that its active ingredients have begun to react, should be discarded.
2. The mixing time of tile adhesive.
Tile adhesive should be stirred with a low-speed mixer (500r min), and the powder should be added to the water and stirred for 3-5 minutes to form a uniform non-dough-free glue.
3. How long can the tile adhesive be used after adding water to stir?
Generally, we use a blender to stir for 3-5 minutes, let it stand for about 5 minutes, and then stir it again to use.
There are two functions of standing here: one is to remove the air brought in during the mixing process, and the other is to let the tile adhesive fully cure, which is conducive to maximizing the adhesion of the tile adhesive.
4. How long will it take to use up the tile adhesive after mixing?
The tile adhesive can be operated for about 3 hours under standard conditions (20 °C at 50% humidity). The actual operating time depends on the weather conditions, and the operating time will be shorter in hot and windy weather. For example, in summer, the operation time of tile adhesive in the southern region will be shortened indoors, and the stirred tile adhesive should be controlled to be used up within 1 hour.
5. How long does it take to paste the tile adhesive batch after scraping?
The drying time of the tile adhesive scraped on the wall can not be too long, which is about the same as the time that the glue batch scrapes on the base surface to keep it moist and does not crust. In windy and hot weather, the drying time will be greatly shortened, so special attention should be paid when pasting tiles in summer, once the crust is pasted again, it will seriously affect the adhesion of tile adhesive. Generally, the tiles should be pasted within 20 minutes after scraping the wall.
6. How long can the dislocation adjustment be carried out after the tile adhesive is applied without affecting the bonding strength?
The time for tile pasting to be adjusted without affecting the bond strength is generally less than 30 minutes. If the adjustment time is exceeded, it will affect the performance of the tile adhesive.
-
After the tile adhesive is evenly stirred and constructed, the initial setting time is 20 minutes, the surface drying is 24 hours, and it takes 28 days to reach the inside dry in a week, and the performance is stable and completely dry. After 28 days, the properties of the product are completely stabilized. Generally 24 hours can be, the main characteristics of Chenguang tile adhesive are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, is an ideal bonding material.
Under normal circumstances, the tile can be started after 24 hours after the paving, and the joint is completed and then 24 tiles have been basically solidified, and there is no problem with daily stepping on it.
First of all, you need to use an electric mixer to stir for about 5 minutes, the specific gravity of the water is as small as possible, as thick as possible, and the slurry can stick to the scraper.
The water content must not be too much, and it must not be stirred with a shovel!
-
Generally, it can be used after stirring evenly, like when I use rain tin strong tile adhesive at home, it can be used when stirring evenly, you can look at the instructions when you use it, and it will not delay for long, and save follow-up trouble.
How long does it take for tile adhesive to dry and harden after tiling?
It refers to the time for the tile adhesive to solidify and harden after pasting, and the curing time of ceramic tile adhesive is usually 24 hours. In the environment of low temperature and high humidity, the hydration reaction rate of cement-based products will be slowed down. In order to better lock in the moisture, the tile adhesive is added with a water-retaining agent, so the curing time will be extended accordingly, so the product protection should be done during winter construction.
After the tile is firmly pasted, the performance of the tile adhesive as a cement-based product will not deteriorate. Under the influence of no force majeure, it can have the same life as the structure.
Precipitation bar, if it is bottled, it has instructions on the outer packaging.
Tile adhesive, tile adhesive silly can not be distinguished, tile adhesive and tile adhesive are different: the ingredients are different, the main components of tile adhesive are gravel, concrete calcium formate, styrene-butadiene rubber powder and its acrylic emulsion. The main components of ceramic tile back coating glue are moisturizing emulsion raw materials, inorganic silicates and their polymers. >>>More
Both are materials used to pave ceramic tiles, the main difference is that the product form and usage are different, the function of tile adhesive is similar to cement mortar but better than cement mortar, it can be used alone, but the adhesive should be used with tile adhesive, it will be more firm, especially for large tiles or floor tiles on the wall, it is more recommended to use adhesive; The landlord can learn about the brand of Keshun home waterproofing, which has tile adhesive and tile adhesive, and the adhesion is quite good, which is worth using. You can go yourself.
Tile adhesive, also known as tile adhesive, is a kind of high-quality cement, quartz sand, cellulose and other materials made of scientific proportioning, relative to cement river sand, its adhesion force is more than three times, and the construction is simpler, you can omit wet the wall, soak the tile, fix the support and other steps, only need to add water in proportion to the construction, the following is the conventional construction method: >>>More
Of course, home decoration is inseparable from ceramic tiles, so tile adhesive is indispensable. It's just that tile adhesive can't be used indiscriminately, are you doing the right way to use the following? 1. Apply the glue to the working surface with a toothed scraper to make it evenly distributed and form a toothed shape. >>>More