Problem 5 of the ball machine not spinning automatically

Pelletizing machine is special equipment for cement, chemical industry, charge and so on. It is characterized in that: this ball-forming machine has a main shaft, the main shaft is connected to the shaft support by bearing, the top of the main shaft is connected with the cone umbrella rotator, the main shaft, the cone umbrella rotator is connected with the support, the upper end of the support is connected with the hopper, the material agitator, the returner, the ball forehearth are also connected on the support, and the lower part of the support is connected with the belt conveyor and the ball bin hopper.

The ball-forming machine is mainly used to press powdery materials that are difficult to form, which is characterized by large forming pressure, adjustable rotation number of the main engine, and equipped with screw feeding device. The main engine is controlled by an electromagnetic speed regulating motor.

The power is provided through the pulley, cylindrical gear reducer, and transmitted to the driving shaft through the rod pin coupling. The active and passive shafts are synchronized by open gears. Hydraulic units are installed behind the passive housings.

The screw feeding device is driven by the electromagnetic speed regulating motor, rotates through the pulley and worm reducer, and the pressed material is forced into the main feeding port. Due to the constant torque characteristics of the electromagnetic speed regulating motor, when the pressing amount of the screw feeder is equal to the amount of material required by the main engine, the constant feeding pressure can be maintained to make the pellet quality stable. If the feeding volume is too large, the electrical overload of the feeding device; If the supply amount is too small, it will not form a ball.

Therefore, skilled operation skills are an important condition to ensure the normal operation of the ball. The hydraulic protection device is a hydraulic pump that pumps high-pressure oil into the hydraulic cylinder to cause axial displacement of the piston. The front joint of the piston rod is pressed against the housing to meet the production pressure requirements.

When there is too much material feeding between the two pressure rollers or into the metal block, the piston rod of the hydraulic cylinder is overloaded, the hydraulic pump will stop, the accumulator will buffer the pressure change, the relief valve will open the oil return, and the displacement of the piston rod will increase the gap between the pressure rollers so that the hard objects will pass through the pressure rollers, and the system pressure will return to normal, which can protect the pressure rollers from damage. This machine can adjust the pressure according to the requirements of the ball density, and the production is flexible and flexible.

The ability to control the four directions of the ball machine means that the front and rear ends and wiring are no problem, if you want to cruise automatically, you need to go to the DVR to set the cruise attribute, Hanbang's video recorder is used less, but it is generally to enter the setting, select the preset position, select the path, the mode of cruising start, you can let the ball machine rotate automatically.

Generally, in the gimbal control place, there is an automatic rotation button in the middle of the four buttons, up, down, left and right, and it will automatically shake the head when you click it.

The cruise function in the monitoring refers to the rotation of the dome machine, first set the preset point for the dome machine, and then click to start the cruise, and then the dome machine will start cruising according to the preset point set before the dawn of the world.

Wiring method of monitoring ball machine:

2. Suspension series: Take out the upper ball cover from the upper ball cover packaging box, and install the upper ball cover on various brackets.

Introduction to the monitoring dome machine:

The ball machine is a combination of a bolt machine and a gimbal machine. Dome machine full name dome camera, is the representative of the development of modern TV surveillance, she integrates color integrated camera, PTZ, decoder, protective cover and other multi-functional in one, Anyan shelter is convenient, simple to use but powerful, widely used in open area monitoring. The main components of the dome include an integrated limb camera, a high-speed stepper motor gimbal, an embedded decoder board and other electronic devices and a dome guard.