Why can t the lifting drying rack be shaken?

When using it for the first time, it is best to shake the drying rod down first, hang the clothes, and after repeated lifting and lowering several times, after running-in, the lifting is smoother. Once you encounter stuck, first pull the wire rope by hand, check whether it can be shaken when the hand crank is not forced, if it can be shaken, it proves that it is a problem with the corner device, if it can not be shaken, you should check the hand crank, generally this method can be checked.

Related Notes:Lifting drying racks, and floor drying racks, outdoor push-pull drying racks, household steel ladder drying racks, etc. have become a kind of fashion items for modern home furnishings. Fall in love with the feeling of the morning sun, starting with drying clothes.

There are two main types of lifting drying racks: hand-cranked and electric. The electric drying rack with intelligent clothes dryer as the mainstream is unique in material selection, technology, technology and quality, and strives for excellence in product innovation, and now has a standardized and orderly procurement platform to ensure that every material meets industry standards.

Hello dear, glad to answer for you. The reason why the electric drying rack cannot be lifted: 1. The reason for the overheating protection of the motor is that if you press the remote control up and down frequently, the motor will be overheated and protected, and the reason is that the electric drying rack starts the self-protection mechanism, and it can be suspended for an hour and then turned on.

2. The power problem of the remote control is that the remote control of the electric drying rack does not have an indicator light, so it is impossible to determine whether the remote control has electricity, you can try to control it manually to see if the electric drying rack is good. 3. The kernel plays an important control role in the intelligent drying rack, and if it is damaged, it will not work normally. In this case, it is necessary to have it repaired or replaced.

4. If the aging of accessories is due to rust or damage to the drying of the electric drying rack, the top seat, or the hand crank and other components, resulting in the drying rack not lifting, then it is necessary to drip lubricating oil on its surface to reduce the friction generated to see if it can be used normally. Precautions for the use of electric drying racks 1. When using electric drying racks, because they need to be energized, it is strictly forbidden to place them in the rain for use, and it is very easy to have the danger of leakage. And in order to ensure the safety of use, it is necessary to install a grounding wire for the electric drying rack, and there will be no problem with grounding.

2. When cleaning the electric drying rack, the power supply should be switched, and the corrosive cleaning liquid should not be used for construction. Then the fixation of the drying rack must be firm, otherwise it is very dangerous to fall.

Hello dear, your question: what to do if the lifting drying rack does not go up: the drying rack has a hand crank and intelligence, and the reasons for the use of the drying rack are as follows.

1. The kernel is damaged, the kernel plays the role of controlling the hanger, if it is damaged, it cannot work, and it needs to be repaired by professionals. 2. The remote control is damaged or out of power. Batteries need to be replaced or replaced.

3. There is a problem with the internal mechanism parts, and the strand transmission plays a lifting role, 4. The reason why the hand-cranked drying rack cannot be lifted is caused by the damage and rust of the drying rod, hand-cranked device, top seat, steel wire and other components. I hope this helps, and if you have any questions, you can continue to ask me.

Dear, I'm glad to answer for you: What should I do if the lifting drying rack doesn't go A1, first of all, you need to check whether the battery of the remote control is still charged, whether the power is sufficient, if it can't be raised because the battery is out of power, you can replace the battery. 2. If there is no problem with the remote control, you need to check whether the remote control and the host have not been successfully matched.

When the host is powered on, the host emits a "tick" sound, and you can press the rising key with the remote control. 3. You can also check whether the micro-moving switch has failed. 4. You can also check whether the circuit fuse of the motor and the whole machine is loose or burned.

5. It is also possible that there is a problem with the upper and lower ends of the drying rack telescopic rack, and you can check whether it can be retracted freely.

Summary. Hello, electric drying racks cannot be raised and lowered. Reason 1:

If the remote control battery is dead, you can try to change the battery. Reason 2: The electric drying rack is not connected to the power supply, you can check whether the machine plug has poor contact, or whether the socket is energized.

Reason 3: The remote control is not matched to the code, and it is recommended to re-check the code to see if the situation has improved. Reason 4:

The motor of the electric drying rack is faulty and needs to be serviced.

The electric drying rack can't be raised and lowered.

Hello, electric drying racks cannot be raised and lowered. Reason 1: If the remote control battery is out of power, you can try to change the battery.

Reason 2: The electric drying rack is not connected to the power supply, you can check whether the machine plug has poor contact, or whether the socket is energized. Reason three:

The remote control is not matched with the code, and it is recommended to re-check the code to see if the situation has improved. Reason 4: The motor of the electric drying rack is faulty and needs to be overhauled.

The remote control press the indicator light on, but the drying rack does not respond, and the light does not turn on.

The indicator light on the remote control, there is no indicator light on the drying rack.

It may be caused by a damaged kernel, which plays an important control role in the smart drying rack and will not work properly if it is damaged.

Hello Piqian Seepage, thank you for waiting, let me explain to you, 1. Drag the wire rope on both sides with your hands, and then use a little force downward, and then press the remote control again to solve this problem. Everyone should also maintain the electric drying rack frequently in daily life. 2. It may be because the internal steel wire is stuck, if there is a stuck phenomenon in the process of use, it can not be forcibly driven, which will lead to damage to the internal parts when it is used.

3. You can smear a little lubricating oil on the pulley of the electric drying rack, with lubricating oil, the pulley of the electric drying rack can be used normally, and the electric drying rack can be raised, I hope you can be satisfied with it, give a thumbs up and encourage it, thank you!