Self learning method of weaving holes, self learning methods of cashmere sweater weaving and repairi

The self-study method of weaving and repairing holes is as follows:

Preparation materials: threads of the same color as the sweater or threads of similar colors, sewing needles.

1. First of all, turn the sweater over, fold the back of the sweater to yourself, and then find the hole.

2. Align the hole with the weaving direction of the fabric.

3. Then put a hand through the hem of the sweater.

4. Then the needle is threaded with the same color, and the framed part of the following figure is first sewn, <> 5. When suturing, pay attention to the stitches not too big, and the traces will not be too obvious. Once the stitches are sealed, the stitches are cut first.

6. Tie the thread in a knot, and then sew the larger part of the hole, and sew the edge part of the hole together when suturing.

7. Then it's time to suture to the place where the union is combined, <>

8. It is necessary to carry out the seam of the butt and <>

9. Slowly shrink the mouth, and the thread can be broken after stitching, <> 10, so that the holes in the wool can be repaired.

A patched cloth glue is required.

1. Choose your favorite cloth glue and tear it off, as shown in the figure below.

2. Then paste it to the position that needs to be repaired, paste it and press it hard.

3. Paste it like this, don't tear it off, and look at it clearly before pasting.

4. Pour a cup of hot water and press it just on the cloth glue, so that the temperature can strengthen the cloth glue.

5. Even if the hole in the clothes is repaired, it should be left for a few days before washing.

The self-study method of weaving and repairing holes is as follows:Preparation materials: threads of the same color as the sweater or threads of similar colors, sewing needles.

1. First of all, turn the sweater over, fold yourself blindly on the back side of the sweater, and then find the hole.

2. Align the hole with the weaving direction of the fabric.

3. Then put a hand through the hem of the sweater.

4. Then thread the needle with the same color thread, and first stitch the framed part of the following picture first.

5. When suturing, pay attention to the stitches are not too large, and the marks will not be too obvious. Once the stitches are sealed, the stitches are cut first.

6. Tie the thread into a knot, and then suture the larger part of the hole, and sew the edge of the hole together.

7. Then it's time to suture to the place where the union is combined, <>

8. It is necessary to carry out the seam of the butt and <>and shouting.

9. Slowly shrink the opening, and the thread can be broken after the suture is completed.

10. In this way, the holes in the wool are repaired.

<>1. Weaving method: There are four ways to repair the holes of the cashmere sweater, when using the weaving method to deal with the holes, you should use the sweater needle to hook up a line from the hole net, and then prepare a color matching wool thread, and use the method of knitting a sweater to weave it in the hole position.

2. Felt method: After the cashmere sweater is torn, it can be treated with the felt method. Prepare a model you like, then choose the right felt wool, keep poking it on the cashmere sweater until it forms a perfect shape, and then use an iron to iron the felt area.

3. Patch method: After the cashmere sweater is torn, it can be buried by patch method. Prepare a piece of cloth with a patch, then sew it along the edge of the patch with a needle and thread to the place where the hole is broken.

4. Sewing method: The holes in the cashmere sweater can be treated by the sewing method, choose the silk thread with color matching, sew it on the sweater with an embroidery needle, connect the holes on the cashmere sweater, and make the silk thread form a complete shape.

Here's how to mend the holes in your clothes**

1. Draw a square and thread a needle from the inside to the outside in the upper left corner of the square.

2. Thread the needle from the lower left corner of the square, and then thread a needle from the lower left corner of the square, and then thread the needle repeatedly in turn.

3. Cover the hole until it is completely covered, and use another color line through the first line.

It can be summarized as imitating the warp and weft of the fabric to repair the broken place, that is, weaving. Weaving is a very technical and professional type of work. Weaving can be divided into manual weaving, machine weaving, etc.

Hand-weaving is made by using the original warp and weft yarn of the garment according to the weave pattern of the garment, which needs to be seamlessly combined with the weave pattern of the garment. The advantage is that it is smooth and the texture is perfectly connected, and the disadvantage is that many fabrics cannot be woven Seiko, either the yarn cannot be used, or the color difference is too large.

Machine weaving is a kind of modern clothing weaving technology, the spike ridge uses a sewing machine, using a special imitation repair technology to imitate the color and texture of the fabric to repair the broken place. The machine imitation technology effectively complements the manual precision weaving technology, so that the range of clothing that can guess the bimei weaving is wider and wider, the advantage is that the appearance is almost invisible, the texture and color are consistent, and the disadvantage is: not all clothes can be traceless imitation.

Self-learning methods for weaving holes, as follows:

When there is a hole in the sweater, you can use the weaving method, felt method, patch method, and sewing method to repair it, the method is very simple, and you can learn it immediately.

1. Rolling weaving method: prepare a large pin wool similar to the color of the sweater, or wool of different colors, first start the needle on a rod needle, then pick the needle at the hole, pick it up on another rod needle, and weave it according to the sweater texture.

2. Felt method: prepare a part of felt, a baking abrasive, a rod needle, cover the abrasive to the hole, evenly spread the felt in the abrasive bucket, and then press the felt with a rod needle to make it tight and strong, and after determining that the felt has perfectly formed the shape of the abrasive, remove the abrasive and iron it with an iron.

3. Patch method: If the sweater has a large hole, you can prepare a piece of cloth with sequins, cut the cloth into the shape you like, but it must be larger than the hole, cover the cloth with the patch on the hole, and finally sew it with a needle.

4. Stitching method: first determine the shape you want to sew, prepare different colors of threads, and then sew according to the shape, if you want to sew a heart, first sew a heart shape vertically, and then use another color of thread to sew horizontally, which will appear more beautiful, but also perfectly cover the hole.