Does the kitchen need to be made into a cistern? Why?

I don't know if you're referring to a residential room or a restaurant. I'm a chef, and most restaurants don't build cisterns.

Generally, there will be no water outage, and even if there is a water outage, it will be repaired and restored soon. If it is a private house, a bungalow or a small building, if you are afraid of insufficient water pressure, I suggest you install a booster pump.

The kind of more than a thousand is very good and can be used for many years, but it needs to be installed with a pre-filter.

This makes it less likely that impurities can clog the filter screen of the booster pump. If it is just in case of water outage, you can consider buying a stainless steel water reservoir, which is more hygienic, but it also needs to be cleaned once every six months or a year, which is still a bit troublesome.

Before decoration, carefully check whether there is leakage in the kitchen and bathroom on the upper floor, and if there is, you should first do the waterproof project upstairs before decorating. If there are no occupants on the upper floor for the time being or for other reasons, the waterproofing works on the upper floor cannot be treated for a while, measures should be taken to remedy the situation: apply polyurethane to the bottom of the leaking part, but the plastering layer of the leaking part should be disposed of and the base layer should be dried.

Whether the kitchen needs a water storage tank, this should be based on family conditions and environment, if the conditions allow, of course, a water storage tank is necessary, with a water storage tank we do not have to worry about stopping the water for a few days, and the water caused by natural disasters is muddy, and it is more convenient for household water.

It is necessary to waterproof the wall The waterproof height of the bathroom and the adjacent wall should be about 2 meters, and the height of the bathtub wall should be higher than the height of the bathtub, because if we don't do waterproofing, the water will splash on the wall when we take a bath, if you don't do a good job of waterproofing the wall, it will cause the growth of mold, and the mold on the wall is not the result we all want to see.

If there is a water outage for one or two days a year, the population.

Three or five or less, it is recommended not to do it. Under the normal water supply situation, the faucet is generally turned on, which is easy to use, on the contrary, the reservoir is rarely used, resulting in the deterioration and pollution of the water storage, and the reservoir is cleaned in ten days and a half months, resulting in waste and labor.

The greatest possible not to destroy the original waterproof layer Many simple houses, kitchens, bathrooms, and balconies have basically been waterproofed, but sometimes we will modify and move accordingly for the needs of life, and at this time, it is necessary to repair or mend the damage of the waterproof layer to prevent water seepage.

When decorating the kitchen and bathroom, if the original wall and floor tiles are removed and redecorated, regardless of whether the original waterproof layer has been made, the waterproof layer should be redone before re-pasting the wall and floor tiles, and the waterproof layer of the surrounding side walls is 200mm high, and the waterproof layer exceeds the top of the bathtub by 200mm. When there is a shower and there are no other waterproof measures, the waterproof layer should be so that the shower can spray all parts.

The installation location of the floor drain The floor of the bathroom, kitchen, and balcony that needs to be waterproof should be sloped to the floor drain, so that the water can flow to the floor drain with the slope, if the location of the floor drain is higher than the ground, the water level in these places will flow to the living room or other places, and you don't want to take a bath at home.

Summary. How to deal with the sink in the kitchen Step 1: Flip the sink in the placement position and place it by pressing and holding the sink and trace the * outline along the edge of the sink Step 2:

Take away the sink and draw the cutting line inside the * profile of the sink Step 3: Drill a 3 8 hole in the cutting line, put in the saw blade and cut along the cutting line, and then smooth the cut with sandpaper Step 4: Fill the outside of the incut with transparent silicone with a width of Step 5:

After installing the kitchen faucet, put the sink close to the front edge slowly, cover the glue and slowly lay it flat Step 6: Check the position of the sink on the countertop again, apply glass glue to the link strip, and finally clean the countertop.

How to deal with the sink in the kitchen Step 1: Place the sink in the placement position and hold it, and trace the sink along the edge of the sink Step 2: Take the round sink away, touch the orange and draw the cutting line in the * outline of the sink Step 3:

Drill a 3 8 hole in the cutting line, put in the saw blade and cut along the cutting line, and then use sandpaper to smooth the cut Step 4: Fill the outside of the cut with transparent silicone, the width is Step 5: After installing the kitchen faucet, put the sink close to the front edge and slowly put it in, cover the glue and slowly lay it out Step 6:

Double-check the position of the sink on the countertop, apply glass glue to the link strips, and finally clean the countertop.

The cistern is next to the gas stove, generally speaking, the decoration of the kitchen is done in accordance with the order of washing, cutting and frying, the pool and the gas stove are too close to be inconvenient in use, because I don't know how many floors you are modeling, the best way is to change the waterway. The location of the gas determines that it is difficult to move your gas stove, and the only way to change it is to change the water route. The sewer pipe is generally a PVC pipe with a diameter of 5 minutes, which can be changed.

However, it should be noted that: 1. The sewer pipe should not be changed to be too long, and the fewer turns the better, so as to prevent the blockage of Minnasai. 2. The two points of the water change should have a certain slope, not less than 5°, which will not affect the water.

At present, stainless steel sinks, no matter how high or low, are basically made of 304 stainless steel! The reason is that (good processing performance!) Heat and corrosion resistance) is very suitable for factory welding and mass productionWhen buying a kitchen sink, I wandered between a single sink and a double sink, until I saw the neighbor's sink, I can only say, we are not a problem, it is too outdated!

Why? When people make two cuts on the sink countertop, there is an extra drain board, which is so smart!

1. The design of the folding drain rack; 2. Faucet design that can be rotated and pulled; 3. Faucet aerator design; 4. The anti-blocking design of the sink pipeline is indispensable in the kitchen, but the design of the sink also covers a lot of skills. First of all, it is the choice of the location of the sink, compared to the stove, the sink will not produce too many stains in the process of use, so there are still more places where the sink can be placed.

Large objects such as woks and pots can not be cleaned in a single tank, which is very inconvenient, and it is easy to splash water outside, and the ** of the double tank is expensive, because of the two sinks, it is also very troublesome to install the sewer pipe to drain the water. The most widely used sink material, stainless steel is the ideal material for kitchen sinks, which is lightweight, wear-resistant, high-temperature resistant, not easy to age, not easy to corrode, no oil absorption, no water absorption, no scale, no odor, is incomparable to other materials. A single basin is more suitable for infrequent **, or for island use in Western-style kitchens.

On the other hand, double basins are relatively suitable for small space kitchens, or located in the corner of the kitchen.

At present, the types of kitchen sinks are mainly divided into, single sink, double sinks and large double sinks. The large and small troughs are scientifically partitioned, and the fruits and vegetables, pots and pans are cleaned in different areas, which is clean and hygienic. The common sizes of double slots are 880*480mm and 810*470mm; There are also larger three-tank sinks, the general size is 970*480mm, 1030*500mm, and there are relatively few three-tank sinks for ordinary residences.

I think you can work on the materials used in the pool and the shape of the pool, and instead of using the square pool of ordinary people, you can design a better shape according to your preference.

I think that when designing the kitchen sink, it should be designed in the color of a flower, so that the design will be more beautiful, so that it will be more practical, and it will also make the kitchen a bright color.

I think we can make some changes to the location of the pool and the material, such as using stainless steel.

In fact, the kitchen pool is the sink we often mention, the kitchen pool is an indispensable kitchen supplies in our lives, people will brush dishes or wash vegetables in the kitchen pool, most of the kitchen pools are directly purchased from the sales business, and then go home directly for installation, but when we install the kitchen pool, we still need to have a certain understanding of the feng shui layout of the kitchen pool, because the feng shui of the kitchen pool may also affect the fortune of the home, Let's find out together.

How to design a sink in the kitchen

The role of the sink in the kitchen is to wash vegetables, pots, and dishwashers, so the design of the sink should be practical, and the sewer pipe should not leak, otherwise you will make the kitchen splash when you cook, and if the floor is wet, it will bring hidden dangers to your own safety. In the design of the kitchen sink, we must first pay attention to the rationality of the design and the drainage function. In this way, the safety of people in the kitchen is basically guaranteed.

Feng Shui knowledge of the layout of the kitchen sink

From the perspective of the five elements of numerology, we all know the truth of water and fire, and we all understand the truth that water and fire are incompatible, so in the design of the kitchen pool, we can't design the pool too close to the stove, which will bring health problems to the people who cook in the kitchen, and it will affect the cooking heat, so that the food made is not good, and it will make the family feel uncomfortable after eating. Therefore, the kitchen pool feng shui says that the pool must be far away from the stove.

For the location of the kitchen sink, it is best to choose the place by the window, because the location of the kitchen stove can be selected from the south and north, so as to avoid the sunset to bring bad feng shui to the stove, so that the person who cooks in such a bad mood to cook is different. This kind of problem is also mentioned in the kitchen pool feng shui, we all want our family to be healthy, and we all hope that the meals we make can bring health to our family, so we have to have a clear understanding of the feng shui knowledge of the kitchen. Kitchen pool feng shui is one of them, I hope to bring you a good reference.

The above is all the content we have introduced about the layout of the kitchen pool, you can see that we have divided the knowledge related to the kitchen pool into two parts to introduce, first of all, we introduced in the first part of the kitchen pool how to design, the design is actually the most important thing to master is the practicality of the kitchen pool, and then when the kitchen pool is laid out, it is necessary to pay attention to the location by the window, because the window can avoid the problem of bad feng shui of the stove.