What are the pros and cons of the absorbent brick directly brushed adhesive construction without soa

It is not recommended to absorb the tile directly brush the adhesive construction Reason one, the absorbent tile directly brushes the adhesive, so the construction is not good, the absorbent tile is the decoration paste of the wall tile, also called the porcelain piece, some people do not know much about the wall tile material, the surface of the wall tile and the bottom of the billet is not the same material, that is to say, the surface material of the wall tile is good, it is not absorbent, the bottom material is rough, the water absorption is particularly high, such as the absorbent tile is not blistered, or the water absorption is insufficient, like this case, the tile can not be pasted on the wall.

If you do this, the tile will not be firmly pasted, and it will be raised in the later use, which will affect the appearance very much.

If the absorbent brick is brushed with adhesive and not cleaned, it generally does not have much effect, but there should not be too many things on it.

The advantage of this is that there is no need to soak in water, the construction is fast and simple, and the tiling can be completed more quickly. The disadvantage of this is that the absorbent bricks are easy to crack and easy to fall off.

The tile can be pasted without soaking in water and directly brushing the adhesive.

The bricks that brush the adhesive are generally all porcelain, which does not need to be soaked in water, and the bricks that want to be soaked in water are not all porcelain bricks.

It should be completely moistened, but there should be no open water. Use a toothed scraper to evenly apply the tile adhesive to the wall and the back of the tile, and ensure that the angle between the toothed scraper and the base surface is consistent in the scraping. The ratio of high-quality glue is scientific, the stirring is sufficient, and the powder is relatively uniform.

After the glue is completed according to the proportion, it is also necessary to add water and stir.

You don't need to soak in water, because the adhesive is originally water-based, and you don't need to soak in water when you use the adhesive.

The decoration foreman explained the situation of tile brush adhesive and soaking in water, which needs to be treated differently, and I hope to help you in decoration.

You can use structural adhesive tape, but with cement tape, it will not be closed, and the jacking bag will be taken off.

Yes, the current ceramic tile process can be pasted with structural adhesives.

What are the pros and cons of the absorbent brick directly brushed adhesive construction without soaking in water?

Absorbent tiles are directly brushed with adhesive, so that the rock sells slippery construction is not good, absorbent tiles are decoration pasted wall tiles, also called porcelain tiles, some people do not know much about the wall tile material, the surface of the wall tile and the bottom of the billet is not the same material, that is to say, the surface material of the wall tile is good, it is not absorbent, the bottom material of the billet is relatively rough and rough, and the water absorption is particularly high, such as the absorbent tile has not been blistered and treated, or the water absorption is insufficient.

1. The soaking brick is not soaked in water, and the adhesive cannot be brushed directly.

2. The soaking bricks still need to be soaked, and if you brush the adhesive directly, there may be hidden dangers of hollowing, shelling and even cracks. Soaking brick refers to the tile that needs to be soaked, because its water absorption will be relatively large, so in order not to make the mortar of the paving lose water, resulting in the mortar can not play its due bonding role, so the tile needs to be put into the water for full soak before paving, and then take out to dry for paving.

Soaking bricks are very common in decoration, not that the quality is poor, but that its properties are like this. So, is it okay to brush the adhesive directly without soaking the water brick? Is there a difference between soaking bricks and not soaking bricks? Let's take a look!

The tile can be applied directly with adhesive without soaking it in water.

The adhesive brush brick closure bucket is usually an all-ceramic tile that does not need to be soaked in water, and it is not an all-ceramic tile that needs to be soaked. Do not apply adhesive to such bricks after soaking.

It must be completely moist but not clear water. Use a toothed absorbent spatula to evenly distribute the tile adhesive over the walls and back of the tile. During the squeegee, make sure that the angle between the toothed squeegee and the bottom surface is the same.

The high-quality glue ratio is scientific, the mixing is even, and the powder is relatively uniform. After the glue is finished proportionally, it needs to be stirred with water.

1.The soaked bricks need to be immersed in water before they can be pasted with cement. If the bricks are not immersed in water, cement is used.

Later in the bonding process, the tiles are likely to be fixed or cracked. Unsoaked bricks do not need to be soaked in water and can be mixed directly with cement mortar.

2.Water-soaked bricks can be better glued to cement and bricks during construction. After use, there will be no cracking in the later stage, and the hardness of the unsoaked bricks will not be soaked.

Good firmness. Even if you buy non-soaked Sunbi-style bricks, it's a good idea to soak them before using them.

The fact that tiles need to be soaked in water does not mean that they are of poor quality. Whether a tile needs to be soaked in water or not depends on its water absorption. If the water absorption is less, there is no need to soak in water such as vitrified tiles or polished tiles, just dry them directly.

The water absorption rate of using more glazed tiles in the kitchen and bathroom is usually greater than 10, so water immersion is a must. This can effectively prevent the dry bricks from absorbing moisture in the mortar after laying, which can lead to hollowing, cracking and even falling off in later use.