Many people will shovel off the insulation of the ground when they drill into the ground, what are t

When decorating, it is necessary to do insulation, especially when the top layer is designed, especially in the south. Of course, there are often some problems encountered during the construction process. This issue needs more reference and attention. <>

Thermal insulation is generally divided into internal thermal insulation and external thermal insulation. Exterior walls and open-air balcony walls are insulated. The material is generally extruded plastic board or insulation mortar.

The exterior wall has nothing to do with the interior decoration. If it is on the balcony, it is recommended to shovel off. Otherwise, the balcony wall is easy to fall off after being tiled. If it's paint, that's okay. The internal insulation is generally made of thermal insulation mortar. If the interior walls are latex painted.

There is no need to shovel, but the floor must be shoveled, otherwise the keel will not be fixed when laying the floor, and even if the hole is deepened, the floor will still loosen after a long time. If you choose to enclose the balcony, you can directly remove the insulation. Because the exterior walls must be insulated, there is no need to seal the balcony.

Insulation. For closed balconies, removing the insulation layer has the following advantages, although the insulation layer looks relatively flat and is suitable for direct tiling, but the insulation layer is mainly asbestos mesh.

and foam, can not absorb the moisture of the cement, and the tiles will fall off after a long time. But this will not be the case with the bricks after dismantling and then putting the bricks. Removing the insulation layer is conducive to the expansion of the balcony space, and families with small balconies can try it. <>

When decorating the home, the balcony is not sealed, and the insulation layer can be shoveled or not. If you don't remove the insulation, you have to put tiles, and it's not the best of both worlds. The exterior wall insulation layer is added with steel wire mesh, and then a layer of plastering mortar (special for insulation layer construction), then flexible mortar is smeared, and the wall is smashed with large nails (special for insulation layer construction).

The more professional method is to remove the insulation layer and use rock wool.

and the keel is re-fixed, and then a layer of anti-cement board is applied.

Tiled on a cement slab. Is it necessary to shovel off the insulation? If it is insulation, there are two kinds of insulation: internal insulation and external insulation.

It is also necessary to understand whether the problem needs to be shoveled on a case-by-case basis. If it is on the balcony, it is recommended to practice Zen Buddhism, otherwise it will be easy to fall off. These can be referred to for more reference.

How to make an insulating layer, and the specific ways and methods of making an insulating layer can be learned. The specific methods of sealing balconies and not sealing balconies are different, and these tips can be referred to more. <>

The advantage is to increase the height of the point floor. The disadvantage is that the heat loss will be greater, especially for household heating, that is, most of your neighbors who are not heated will have a greater impact on you. Of course, the heat is from the bottom up, and it doesn't have much effect.

If you have heating downstairs, it will have less impact on you. What's more, a reflective film will be laid under the pipe to prevent heat loss.

1.Most of the insulation layer is made of polystyrene board or rock wool or extruded plastic board and sand paddle, which are relatively soft, and the thermal insulation layer can play the role of house insulation, heat insulation and sound insulation. Eradicating it may have less effect, but re-laying the floor heating actually has little effect, and it is minimal.

2.If you still need to groove on it, it may destroy the reliability of the floor slab, and the floor layer has steel bars, it is best not to destroy the steel bars, and it is not recommended to go down further after slotting to the steel bars, after all, safety is the most important.

Pros: This will make the floor smoother. It is conducive to the fixation of the ground keel when laying the floor, even if the hole is deepened. Disadvantages: After eradication, the fire rating and insulation of the house will be reduced, and the cost of air conditioning and heating will be doubled.

The advantage is to shovel the insulation layer of the ground can increase the space of the room, but the disadvantage is that it will affect the insulation effect of the home, and in winter, the home is still relatively cold.

Yes, for the following reasons:

1. The thickness of the insulation layer of the inner wall should be 3-5 cm, if it is a single protrusion of the whole surface, it will affect the overall appearance, but also affect the later life, for example, the owner wants to hang something in this wall hole, without removing the insulation layer is absolutely not hanging. Because most of the insulation layer is made of polystyrene board or rock wool or extruded plastic board and sand paddle, it is relatively soft.

2. If the insulation layer of the interior wall is not removed, there will be cracks on the wall surface of the latex paint in the later decoration.

3. The insulation layer of the interior wall occupies a lot of housing area, especially for Chengdu, which is not a northern city, which is of little significance.

The insulation layer is removed because if the tile is directly paved on the insulation layer, the tile will be easy to loosen and fall off due to the insufficient adhesion of the plastering layer on the insulation layer.