Should the insulation wall be shoveled? How to repair the insulation wall after it is removed

To shovel off. If the insulation layer of the interior wall is not removed, the latex paint will be painted in the later decoration, and cracks will appear on the wall. Interior wall insulation takes up a lot of space and doesn't mean much to southerners, especially for southerners. Moreover, the internal wall insulation is retained, which means that the new house cannot be directly opened on the wall when decorating.

Thermal insulation is generally divided into internal insulation and external thermal insulation, external thermal insulation is done on the exterior wall and open balcony wall, the material is generally extruded plastic board or thermal insulation mortar, the exterior wall has nothing to do with the interior decoration, if it is on the balcony to shovel off, otherwise the balcony wall is easy to fall off after the wall tiles, if it is the paint it will be fine.

The internal insulation is generally used insulation mortar, and the indoor wall is latex paint without shoveling, but the ground must be shoveled, otherwise the keel is not fixed when laying the floor, even if the hole is deepened, the floor will still be loose.

It cannot be eradicated. Because the wall insulation can play a role in indoor temperature control in summer and winter. According to the national energy-saving requirements, all residential and other buildings must be energy-saving and thermal insulation measures on the exterior walls. And it is a mandatory requirement of the state.

There is a protruding part of the wall, it is generally recommended to shovel and do flat, the whole wall is insulated, you can shovel or not, this depends on the actual requirements of the landlord, the removal of the insulation layer is definitely charged, and the base layer after the shovel needs to be leveled, which may also increase the cost.

Insulation walls cannot be shoveled.

The insulation layer is placed on the outside of the building, which greatly reduces the influence of natural temperature, humidity, ultraviolet rays, etc. on the main structure, so that the main structure can be better protected. This insulation method not only improves the thermal insulation of the wall, but also increases the thermal stability of the room (the indoor temperature can be kept relatively stable), and the wall has good moisture resistance.

It can avoid indoor condensation, mildew and other phenomena, can create a comfortable indoor living environment, and has a good energy-saving effect. The insulation layer is placed on the inner side of the external wall of the building, which has the advantage of convenient construction, and does not have high requirements for the waterproof and weather resistance (natural climatic conditions) of the insulation material, and the relationship between these residences is not large.

Hello, I'm sorry to keep you waiting, how to repair the insulation wall after it is removed: 1. Treat the wall. After the orange layer is removed, the first thing to do is to remove the covering on the wall, spray the wall with water and remove it with a small shovel.

After removing the covering, clean the surface with detergent. Wait for the wall to dry before repainting. 2. Treat the insulation layer.

The insulation will fall off once it breaks, so be sure to dispose of the insulation. It is processed with an electric shovel and a cutting machine, and after treatment, it is leveled with cement mortar. 3. Scrape putty.

The last step is to scrape putty, which is very absorbent. Once completely processed, you can decorate your walls.

Summary. In the process of our construction, we have only seen the indoor exterior wall with thermal insulation, from the inside, if it is an indoor wall, we have never seen thermal insulation.

Hello, I'm glad that your problem is envy then our personal decoration, in the open balcony insulation needs to be eradicated, because if the balcony is sealed, the insulation will lose its meaning of existence in the future, and the divination shed is slow to use the indoor space, so there is no need to leave it on the balcony, it should be eradicated, clean up I hope mine will help you, thank you

You can make a voice.

Indoor insulation.

If the balcony is insulated, the indoor needs to be eradicated, because the balcony needs to be sealed indoors, and her insulation will lose its original meaning.

Living room. Not a balcony.

in the room. Where is the living room insulated? Can you take a **?

The whole room has insulation as long as it is not the kitchen and bathroom.

In the process of our construction, we have only seen the indoor exterior wall with thermal insulation, from the inside, if it is an indoor wall, we have never seen thermal insulation.

It's really the first time I've seen this one of yours, so it's convenient to take a picture and take a look?

Whether the wall insulation layer needs to be removed should be decided according to the actual situation of your house

1. First of all, you should check the quality of the insulation layer, whether the thickness and quality meet the requirements, whether there is slag dropping, whether the wall is smooth and other problems. If the insulation layer of the blank house is made of high-quality materials, the thickness of the wall is relatively thick, the wall is relatively flat, and the surface will not appear slag and other phenomena, it is of qualified quality, and can not be removed, or only part of it is removed.

2. For parts such as bathrooms and kitchens that need to be tiled in a large area, including those who want to put tiles on other parts, the insulation layer must be removed. When the inspection finds that the quality of the insulation layer is qualified, of course, it can not be shoveled, saving money and effort.

It is important to note that even the best and most advanced insulation materials have a very limited load-bearing capacity. So try not to hang heavy objects on top of the insulation. In addition, if you choose to keep the interior wall insulation, it means that the new house cannot be renovated directly on the wall.

Hydropower renovation should avoid wall slots with insulation layers.

If you do not remove the insulation layer, continue to open the trunking on the wall, and then use cement to repair the trunking, within half a year, the trunking will definitely crack, and the kraft paper can not be pulled. The reason for cracking is simple, because there are foam particles in the insulation layer, and the foam will shrink and age. The cement mortar will not change, and it will cause cracking if it is still the same as a solid nuclear tomb.

What is the function of an insulated wall.

1. The insulation layer is a professional structural layer, which is made of insulation materials, and its main function is to improve the thermal insulation and thermal insulation performance of high houses.

2. When the insulation layer is a part of the building wall, it is more than the wall is glued together, divided into two kinds of external wall insulation layer and inner wall insulation layer, the inner wall insulation layer is relatively thin, and the external wall insulation layer must reach a certain thickness in accordance with the relevant regulations to be qualified, it is composed of high-quality insulation materials, plays an important role in thermal insulation, and is a professional structural layer.

3. The insulation layer has a good protective effect on the main structure of the building, it is mostly pasted on the wall of the exterior wall is a very important part of the building structure, the insulation layer has a good thermal insulation effect, it can avoid climate change in the external environment, has too much impact on the indoor temperature, can buffer the temperature change, resulting in structural deformation, and can also extend the service life of the building and improve the durability of the main structure. The insulation layer can not only make the indoor environment more comfortable, but also reduce the damage of wind and moisture, which will keep the room in a relatively dry state, which can prevent mildew in the room.

Summary. Hello, the wall insulation layer first check the quality of the insulation layer, whether the wall surface is smooth and so on. If the insulation layer reaches the standard thickness, the material used is qualified. It is not possible to eradicate it. All unqualified should be eradicated.

Hello, I am the all-round answerer, I will try to reply to you within five minutes. Please wait.

There is an insulating layer on the interior wall and now there are cracks, do you want to tear it down?

Hello, Qi Xisheng, the wall insulation layer, first check the quality of the insulation layer, whether the wall surface is smooth and so on. If the insulation layer reaches the standard thickness, the material used is qualified. It is not high to eradicate the old. All unqualified should be eradicated.

Shovel out and reinstall.

I'm going to add porcelain on top of it.

The crack is not big.

Shovel off only the cement wall instead of the line.

There are cracks all over the wall.

Can be replaced with a cement wall.

Shovel them all. Quality is not good.

Otherwise, there is no thermal insulation effect.

That's right. It is also possible to reinstall the insulation.

Why the insulation of the wall is soft.

Because the material of this wall is different, most of the insulation walls are soft.

Enter the area and get the decoration for free**].

Nowadays, people's requirements for decoration are getting higher and higher, not only in the decoration is good-looking, but also in all aspects of decoration to meet the needs, for example, like the insulation wall many people will do one. The following will introduce to you how to quickly shovel down the insulation wall. How to quickly shovel off the insulation wall 1, first shovel off the wall skin, clean it with a cleaning agent, or brush it with clean water, as long as the paint is re-brushed after cleaning, there will be no peeling and bulging phenomenon.

2. You can also use a sprayer to spray it at intervals, and when the wall is wet, you can use a shovel to remove it, and it is much easier to remove it. What are the functions of the external wall insulation layer 1, with this product can reduce some interference, especially for the exterior wall transformation, the internal insulation will be damaged, if the use of external insulation can be combined to prevent damage. 2. If it is better than internal insulation from the perspective of thermal insulation and heat insulation, you must know that this material is attached to the outside of the wall, and Zhaoye's practice is also to reduce the cost, and at the same time increase the area of the house, which has higher economic benefits.

3. The external wall insulation board is also conducive to weakening the internal and external joints, as well as the impact of the junction between the frame beam and the parapet wall. 4. Its heat storage is very strong, and the main structure is indoors. The thermal stability is very good, preventing large temperature differences, and the wetting of the wall is also a good improvement.

5. It can be said that it also plays a good role in protecting the main structure, generally speaking, such as thermal insulation is used on the outer side of the structure. When the outdoor climate changes greatly, it plays a buffering role, and will not deform the structure because of temperature changes, so as to avoid a large temperature difference in the internal structure, and also improve the durability of the main body, so that the service life is prolonged. Summary:

The relevant content on how to quickly shovel the insulation wall is introduced here, and the above methods can be used to shovel the insulation wall. If you want to know more about related knowledge, you can consult Qijia.com.

Do the math how much it will cost you to renovate your home

The shoveling of the wall insulation layer will have an impact on the thermal insulation performance of the wall, and measures need to be taken to repair it in time. Here's how to deal with the situation where the wall insulation layer is shoveled:

1.Remove old insulation.

First of all, the old insulation material needs to be removed so as not to affect the adhesion and fixing properties of the new insulation layer. In the case of a match, use manual or mechanical tools to remove the old insulation materials, clean up the oil, dust and other debris on the surface of the wall, and then wipe it clean with water.

2.Add a waterproof layer.

Add a layer of waterproof material to the wall insulation material to ensure the waterproofness of the wall. The waterproofing layer can be applied to the wall using materials such as paint, cement mortar, etc., and a horizontal line about one meter wide is drawn on the wall with a pencil or thin line to facilitate the installation of insulation boards.

3.Re-take Weiga to install insulation.

When installing a new insulation, extruded core insulation board or extruded plastic board can be used as the insulation material, which can be fixed vertically on the wall. Use sealing glue or other sealing materials to seal the gaps between the panels to ensure the thermal insulation performance of the wall. The plate is then fixed to the wall surface with nails or expansion screws on the surface of the panel.

To sum up, the wall insulation layer needs to be repaired in time, otherwise it will affect the thermal insulation performance of the wall. When reinstalling the mountain vertical insulation layer, it is also necessary to pay attention to the selection of suitable insulation materials and construction methods to ensure the quality of the project.

Do you shovel off the insulation layer earlier when you hammer the wall: If there is no cold wall in the wall at home, you can remove the indoor insulation wall, and the space can be increased a lot. If it's the north, it's okay to smash the internal insulation wall, and the indoor heating won't be cold.

However, generally speaking, some remedial measures are needed after the insulation wall is removed, such as if the internal insulation wall of the kitchen is removed, the base layer of the sedan car should be treated (re-hung with net ash) and then tiled. Sometimes whether the indoor insulation wall is smashed or not depends on the outside. If the exterior wall is not insulated, the entire wall may freeze through and crack in winter, and then the wall of your home will be finished.

In addition, the quality of general indoor insulation walls also needs to be studied, because developers may dig this shop because they will do it casually because of the inspection, so if the residents do not know that it is bad, it may crack in a few years, and if it is not eradicated, the wall cracks are difficult to remedy.