Is there any attention to the disposal of old boards?

There is nothing wrong with throwing away the old cutting board and knife, and there is nothing special to pay attention to in feng shui. On the contrary, after the cutting board has been used for a long time, there will be cracks on it, which likes to breed bacteria, so it is best to replace it.

The old wooden cutting board at home is uneven and blackened after a long time, and it is a pity to lose it, so you can renovate it yourself.

Tools Raw materials.

An old wooden cutting board with a grinder (angle grinder.

One, a piece of red sand louver sanding piece, and a mask.

Method steps.

1 3 Step by Step Reading.

Take out the old refurbished cutting board that you need, attach the prepared grinding blade to the sander, secure the cutting board, and put on a mask.

The grinder is connected to the power supply, toggle the control switch of the grinder for a long time, and then you can grind the cutting board, the middle of the cutting board is lower, the external test is higher, and during the grinding process, you can grind a little more forcefully, and then slowly grind the middle part, until the cut marks of the middle part of the cutting board have been ground off, visually check the flatness and feel it at the same time (turn off the grinder in this process), and then slowly trim it according to the height until you are satisfied.

Same as above, after polishing and trimming one side, turn over and polish the other side, and then simply polish the surroundings to polish off the old traces before. After all the surfaces are sanded, the corners are chamfered appropriately.

This makes it easier for us to use, so that we may have a new cutting board.

Precautions. If the cutting board is wet, it needs to be dried and sanded, otherwise the wood chips are easy to stick to the grinding sheet.

If there are metal handles, rings, etc. on the cutting board, first.

1.How to maintain the new cutting board, the maintenance of the wooden cutting board, the maintenance method of the bamboo cutting board:

Brush the new cutting board with dish soap, rinse it with water, wipe it dry and dry it naturally.

2.After drying, use a brush dipped in cooking oil, brush the front and back sides of the cutting board with a layer of oil, wait for the oil to slowly penetrate into the board (about 1 hour or more), make sure that it is completely infiltrated, brush another layer of oil, and then continue to dry, then repeatedly brush the oil, dry, about 3 times on it.

3.Use a paper towel to wipe the front and back of the cutting board clean.

5.Be sure to use this method when you buy the cutting board for the first "maintenance", and the old cutting board that has been used or cracked will not work. Moreover, this method of "maintaining" cutting boards is limited to wooden or bamboo cutting boards, plastic and glass, ahem, there is no need to ha.

6.Wipe down the board with a paper towel and don't put it in the sun, as excessive exposure can also cause the board to crack.

There is nothing particular about this, you can directly use it as firewood or as a waste product**, it's very convenient.

Hello, don't have any superstitions, the old board is handled, nothing is exquisite, as long as you don't litter, it's okay, thank you.

In fact, there is nothing to pay attention to in the treatment of the board, and you can throw it away if you don't use it, in fact, there is nothing to pay attention to when you deal with it according to the board, and you can throw it away if you don't use it.

There is nothing particular about the processing of the board, but it has been a long time, and the middle of the board is a little dented. At this time, we can report it with a carpenter's planer. Zhao Ping is fine.

Of course, it is not excluded that some ethnic minorities or some areas with customs will be particular, but most areas are not particular.

The old board is more particular about the method of disposal, and it must be cleaned and disinfected after each use.

There is nothing particular about the disposal of the old board, that is, if it can't be used, it can be burned on the fire, or it can be thrown away, and there is no special use.

If the old board is handled, it is normal to pay attention to it, because it is normal to classify and screen out the useful first.

There is nothing particular about the handling of the board, you can deal with it at will, and it is recommended that you do not think too much.

Is there any attention to the handling of the board, this must be particular, if you don't deal with this board, it will breed bacteria.

I think if you deal with it, you shouldn't be careful, as long as you leave it for a while, don't let him get moldy.

Is there any attention to the disposal of old boards? The old board can be thrown away when it is used, and there is nothing to pay attention to.

You have to deal with it according to the board, I don't think there's anything to pay attention to, just throw it away.

There should be nothing particular about this, as long as you don't care, because there is nothing to do.

Is there any attention to the processing according to the board? Just by the board, there is nothing to say.

You're talking about whether the board is sticky or not. I don't think there's anything special about it, if you don't need it, just throw it away.

Hello, old boards are disposed of so as not to harm others