-
First of all, the floor tiles, no matter how big they are, under normal circumstances, only cement and sand are used, and nothing else is used. Only thin stickers will use tile adhesive, so under what circumstances do you need thin stickers? It's that the threshold of your home is very low.
Because the cement sand will have a thickness of five centimeters, the threshold will be covered after use, if this is not the case, and tile adhesive is used, then it will be cut purely.
The second wall brick, from the material is porcelain and semi-porcelain, and semi-porcelain is soaked water brick. Before pasting, you must soak the floor tiles in tap water, so that the floor tiles are full and not the stove, and then directly cement and sand paste, without any glue. The 400 by 800 full tiles have this finished product, as well as those that are laser cut with floor tiles.
This kind of brick first has to roll on the back of the tile with adhesive, which is a white emulsion. This step is a must-do, and then the normal paste is directly cement sand paste, if you choose a thin sticker, you need to level the wall with cement sand below. Then scrape tile adhesive on the wall and on the back of the tile.
At this moment, it is necessary to pay attention to the fact that it is not the right practice to mix tile adhesive and cement together. Absolutely not used, and then a larger full tile on the wall, 800, 600 by 1 meter two. 750 times 1.5 meters, all of them have to be thin.
It should be noted here that the tile adhesive label is divided into grades, and different specifications match different types of grades!
Finally, I would like to give you two suggestions, the first full tile back coating glue must be used. Moreover, it is necessary to have a big brand with a warranty period, and tile adhesive cannot be mixed with concrete. Secondly, clarify the size of the tile material in advance.
Negotiate with the construction unit on the pavement method, what is the grade of the well-known brand of glue, so that it is not easy to build in the middle and late stages.
-
Tile paving should be done with special construction adhesive. When laying tiles, it should be used in conjunction with some cement mortar, and the amount should not be too much.
-
933 glue can be used; When paving, we must use glue with high viscosity, wear-resistant, freeze-resistant and aging-resistant.
-
We can choose tile adhesives, they stick particularly firmly; We should pay attention to their gaps when sticking, don't get into our hands, and choose according to their quantity.
-
I think you should use tile glue, pay attention to the glue evenly, so that it will stick firmly.
-
Floor tiles are also a necessity for home décor, and tiles are also a technical activity. If it is not placed correctly, it will affect the overall effect. Therefore, there are still many issues to consider when placing them.
The following will tell youHow to lay tilesReasonable and what glue to choose.
How to lay tiles1: The reasonable method of pasting tiles should first be placed according to the design drawings or design requirements. First, find the color of the brick you want to test for the hail key. At the same time, it is also possible to choose defective tiles.
How to lay tilesTwo: once the tiles are in the scene, they must be sorted, classified and at the same time their location determined to avoid damage.
How to lay tilesThree: The tiles must be soaked before they are placed on the floor. The aim is to prevent the absorption rate of the tile from absorbing moisture from the cement. If not later, serious cracks may appear.
How to lay tilesFour: The floor also recalls that it used to be stained with water, the purpose of this is to reduce dust, and also to allow the soil to absorb some water, so there is no shortage of water in the subsequent steps.
How to lay tilesFive: Next, it is a mixture of cement mats. It is also important that the volume ratio of cement sand to the placement of floor tiles is preferably about 1:
5. Then spray must, shake well. Usually, the thickness of the cement is controlled at a few centimeters; The joint layer and floor tiles must be sufficient. At the same time, these sections were laid.
When paving, it is best to use cement slurry or dry web sludge spraying water for bonding.
How to lay tilesSix: After the tile comes into contact with cement oil, it is slowly beaten with a rubber hammer until it reaches the standard level. Keep in mind that the cement oil must be smooth and there will be no hollowing.
How to lay tiles seven: within half an hour after applying the paste, you should use a clean cloth to clean the delicate surface in the tile layer. The width of the seam between the plates must meet the design requirements.
In general, the width of the seam should not exceed 2 mm. Unless otherwise required by the design, please pay attention to old bricks.
What glue to use for tiling.
1. Brick wall adhesive is more complicated. Generally speaking, we know that glue is also made from a variety of materials. Generally speaking, this material is also provided by the owner, and the construction personnel can match the glue. If.
2、.Wall tile adhesive has high strength adhesion, waterproof, frost resistant, anti-aging properties. Therefore, the use of this material can also replace the traditional product yellow sand cement, so that the adhesive strength of glue tile glue is several times better than that of cement mortar.
As a rule, this material is still used in wall tiles.
Summary:How to lay tilesReasonable and what glue to use for tiling is introduced here, this tile adhesive is also very diverse, but no matter what method is used, the right method must be used to achieve the effect you want. effect, but also the use of appropriate auxiliary materials.
You can get it for free
-
Now I have cement, but I have never used tile adhesive, and I don't know which one is better. : Mosaic tiles or use special tile adhesive will be better, because the viscosity of tile adhesive is much greater than cement.
Tile adhesive also has good flexibility and waterproofness, anti-aging and anti-cracking effect is better than cement, it is also very convenient to construct, no need to soak the brick wall can be directly pasted mosaic bricks. If you don't know which tile adhesive is easy to use, I can recommend one to you, last time I did DIY when I bought a Dunlop tile adhesive, the viscosity is very good, there has not been a phenomenon of falling off, that is, to pay attention to the time of painting, to paint double-sided, that is, to apply tile adhesive on the tile and the place to be pasted. Dunlop, a well-known brand under the German ARDEX GmbH Group, is a leading brand from Europe
-
There are many kinds of glue, tile glue will be used in the decoration of wall tiles, mainly used for posting tiles, face tiles, floor tiles and other decorative materials, widely used in the surface and interior walls, on the ground, bathhouses, kitchens and other building decoration occasions. So, let me introduce to us what glue to use for tiles and what are the methods for tiling. There are many kinds of glue, tile glue will be used in the decoration of wall tiles, mainly used for posting tiles, face tiles, floor tiles and other decorative materials, widely used in the surface and interior walls, on the ground, bathhouses, kitchens and other building decoration occasions.
So, let me introduce to us what glue to use for tiles and what are the methods for tiling.
What glue to use for tiling.
1. Commonly used tiles are tile adhesives, mainly ceramic tile adhesives have high bonding strength, water resistance, frost resistance, aging resistance and convenient construction of wall tile glue, it replaces the traditional cement yellow sand with a variety of ceramic tile glue, and the adhesive force of ceramic tile glue is several times that of cement mortar, and is now widely used in various building occasions such as walls, ground, bathhouses and kitchens.
2. Tile adhesive is scientifically formulated by cement, polymer additives, etc., it is an inorganic material that meets the requirements of environmental protection, and has a strong posting force for smooth appearance.
3. Tile adhesive is divided into the following types:
1) Ordinary tile adhesive. Usually tile adhesive is suitable for posting all kinds of tiles on the usual mortar surface or small bricks on the wall.
2) Enhanced tile adhesive. It has strong adhesion and anti-falling force, and can play an excellent role in the posting of wall tiles and non-mortar surfaces with large requirements for adhesion, such as wooden boards.
3) Heavy brick tile adhesive. This type of glue has a large adhesion and is flexible, which can resist the stress of the adhesive layer due to thermal expansion and contraction, and can be used for gypsum board, fiberboard, splint or old veneer and other large area of various stone slabs.
The method of tiling
1. Above-ground treatment.
Before laying floor tiles, it is necessary to carry out ground treatment, and the level measurement must be completed, so that the slope of the ground can be understood, and the role of paving can be well controlled. Then, according to the floor area and the scale of the floor tiles, the number of tiles required for each row and column is determined.
2. Spread cement mortar.
After the above-ground treatment is completed, it is necessary to spread a layer of mortar on the ground, the ratio of mortar and water is 3:1, forming a semi-dry layer, and fill the surface with a shovel and plastering knife, usually the thickness of the mortar is 3-4 cm.
3. Uniform paving.
After smoothing the mortar, use the cement mortar diluted into 1:1 shares to wipe the back of the floor tile, and then evenly pave it on the ground that is pre-paved with mortar, and after acknowledging that the floor tiles are evenly paved, the next step can be carried out.
4. Trimming and wiping.
Use a rubber hammer and a level to check the hollow drum and flat condition of the floor tiles, and after all the ground paving is completed, after admitting that the pattern and texture are correct, you can use caulk to fill the caulk the next day.
-
In the process of tile paving, glue is an indispensable adjuvant. Tile adhesive is made of high-quality cement and polymer additives, which meets the requirements of environmental protection and has strong adhesion to smooth surfaces. This kind of tile adhesive effectively replaces the traditional cement yellow sand, and the adhesion is several times that of cement mortar, and the application range is very wide.
So, what glue is good for paving tiles? Let's answer this question with the rolling noodles, and let's take a look at it with interested friends!
First, what glue is good for paving tiles - deacetate type.
The vulcanization speed of this kind of glue is extremely fast, the transparency is very good, the acetic acid is easy to be released during the curing process, and it has a very strong taste, and it is corrosive to metals, coated glass and some inorganic materials.
Second, what glue is good for paving tiles - dealcoholization type.
This tile adhesive has a low curing shrinkage, a low chance of peeling off when immersed in water, and most substrates are non-corrosive. For fluorocarbon profiles, plastic steel and marble, the adhesion will be poor. If you work at high temperatures, the reaction will be relatively fast, and the small molecules will not be able to exert their effects in time, forming bubbles, which will affect the quality of construction.
Third, what glue is good for paving tiles - deacidification.
Acid adhesives are not suitable for use on cement and stone, because acid adhesives will solidify to produce acetic acid, which will react with the surface of alkaline materials such as cement and stone, and the expansion coefficient of the substrate is very large, which may cause displacement or vibration. If the construction is too thin, the skin is easy to cause wrinkles on the surface of the neutral glue after curing; If the neutral glue is used in combination with acid glue, it is very likely to cause the neutral glue to turn yellow and the glue to be too thin.
Tile adhesive for floor tiles.
Paving will be hollow, basis: tile adhesive is commonly known as tile adhesive, it is based on the traditional mixed mortar to add glue and the rest of my admixtures to update the production of a common use of ceramic tile raw materials. This kind of raw material has good characteristics, and the quality of floor tile parquet can be better ensured. >>>More
Tile adhesive, also known as tile adhesive or binder, adhesive and other names, is a new type of material for modern decoration, replacing the traditional cement yellow sand, the adhesive force is several times that of cement mortar, can effectively paste large ceramic tiles and stones, and avoid the risk of falling bricks. Good flexibility to prevent hollowing in the production of drums. This product is a polymer modified cement-based tile adhesive, which is divided into No. 1 (ordinary type (reinforced) and No. 3 (larger size tile or marble) and other varieties. >>>More
Mix the glue evenly, and do not have corn starch dough.
Method: 1. Mixing of vitrified brick adhesive. >>>More
Tile adhesive, also known as tile adhesive, is a kind of high-quality cement, quartz sand, cellulose and other materials made of scientific proportioning, relative to cement river sand, its adhesion force is more than three times, and the construction is simpler, you can omit wet the wall, soak the tile, fix the support and other steps, only need to add water in proportion to the construction, the following is the conventional construction method: >>>More
Tile adhesive, also known as tile adhesive or binder, viscose, etc. The construction wall should be moist (wet outside and dry inside), and maintain a certain degree of flatness, and the uneven or extremely rough parts should be leveled with cement mortar and other materials; The base layer must be cleared of floating ash, oil stains, and wax, so as not to affect the adhesion; After pasting the tiles, you can move the correction within 5 to 15 minutes. The water-cement ratio is about 1:4, and the binder after stirring should be used up within 5 to 6 hours (when the temperature is about 20 degrees); Apply the mixed adhesive to the back of the adhesive and press firmly until it is flat. >>>More