How do I wash off the 502 that dripped onto my rubber shoes?

If you can't get it off, the shoe will have to be scrapped.

1. You can use a wet hot towel to stick 502 there. After ten minutes, the cured 502 will become soft and can be removed. In addition, you can put a drop of 502 on the place where there is 502, and the cured 502 will also become soft, so it can be removed with a towel.

2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly.

Glue is an instant glue that can be used with a dissolved organic solvent, such as acetone. Acetone solution washable. However, inhalation of acetone is toxic, pay attention to the internal use method, you can stuff the adhesive part into the bottle.

It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

4. Stick 502 glue on a small area, as long as you soak it in hot water, if a large area is stained with 502 glue, coated with acetone, and wait for about 5 10 minutes to remove.

502 is a kind of super glue, while bringing convenience to people, sometimes accidentally sticking to things that do not want to paste, the way to remove 502 is:

Use banana water to drop on the glue stains, and at the same time use an old toothbrush to constantly stir and brush, until the glue stains become soft and take off, then rinse with water, brush repeatedly, and brush until you know. You can also put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it with cotton dipped in water.

Answer: If the shoes are stained with 502 glue, you can use a hair dryer to tear off the hot air to make the glue soft; Wipe back and forth with industrial alcohol; Banana water drips on the old gum and brushes repeatedly with an old toothbrush; Apply nail polish remover to the glue to soften the old glue and rub it off with sandpaper. Here's how:

1. Use a hair dryer to blow hot air for 10 minutes, if you feel that the glue is soft, take the opportunity to tear it off, and then use a dry cloth dipped in baking soda to wipe off the traces left by the glue.

2. Wipe back and forth with industrial alcohol, medical alcohol can also be used improvised, the effect will be weaker, wipe back and forth with a dry cloth or cotton swab dipped in alcohol until the glue is removed.

3. Banana water drops on the old glue, brush repeatedly with an old toothbrush, and after the glue is removed, you can use white vinegar to clean up the glue traces.

4. Apply nail polish remover to the glue to make the old glue soft, and rub off the glue with sandpaper. This process is slower, be patient.

How did I accidentally touch my shoes when I washed them, and now I wash them.

It's a pity to kiss you.

Ask what dye you can use to dye it blue.

Dear, ** there is a suede dye for sale.

You can take a look.

Ask a good love for you

If you can, please kiss me and give me a thumbs up.

Thank you, kiss.

<> when the shoes are sticky to 502, you can soak the shoes in hot water first, and then wash them with a brush. Generally, the shoes that have just been glued to 502 for a short time, and those who can easily go with hot water are noisily removed. If the effect is not obvious, you can soak the part of the shoe sticking to 502 with alcohol, or wipe the nail remover and 502 remover.