Pine needles can t be watered thoroughly, is there any way to solve it?

Watering potted plants requires a good grasp of the amount of water used, which is not easy to grasp. Today, we are going to teach you a simple "trick" to solve all your watering problems.

1.Inadequate watering or stagnant water can causePotted plantsRoot rot

The traditional way to water flowers is to pour a scoop of water directly into the pot, but this is mostly based on feelings. It is very unscientific to use this method for a long time. It is well known that potted plants are most afraid of waterlogging.

If you pour it in like this, you'll either not survive it or pour too much, resulting in stagnant water. If there is too much water in the pot, the roots will rot due to lack of oxygen. The amount of watering is directly related to the potting soil, especially for potted plants that have not been turned over for several years, the soil in the pot is agglomerated and the water enters the pot, and before the roots absorb the water, the water flows directly out of the cracks in the plate, making people feel that the water coming out of the bottom of the pot has been completely watered.

In fact, some root systems can dry up and rot over time if left unwatered for a long time.

2. The best "watering" trick

The amount of water used for potted plants is based on accumulated experience. It depends on the choice of soil and the protection of the environment.

It's not the same. Since it takes experience to master how much to water, how should a novice gardener water a potted plant? Prepare a pot that is larger than a pot.

Simply install a basin with a waterproof bottom. Fill the pot with less water than the pot and "put" the pot in the pool to soak. Here's how to soak.

The principle of pot soaking is that the water starts to draw water from the drain at the bottom of the pot, and when you see that the soil on the pot is wet, you can take out the pot after the soil has absorbed enough water. The biggest advantage of soaking pots is that the clumped soil absorbs water well without causing water accumulation in the potting soil.

This method of watering is suitable for all potted plants, especially succulents, which have strict water requirements. The soaking pot thoroughly soaks the soil inside the pot so that each root can absorb water. The principle of watering most potted plants is "dry thoroughly, not dry, no watering".

It is best to wait until the potting soil is completely dry for a few days, then water the potted plants to allow the roots to "slow" in the dry potting soil for a few days. After watering again, the potted plants will grow more vigorously.

Pine needles are not watered thoroughly because it has an oily sponge-like structure, which is difficult to be soaked by water, as long as you put it into a basin of water before use, squeeze out the bubbles by hand to make it fully soaked with water, and then drain the water, the effect will be better. In addition, it also has a good effect on some other ordinary soils.

Improve watering methods.

Our traditional watering is direct watering.

1. Water frequently.

This is mainly because the water content of pine needle soil is very small at the beginning, and it takes a process to absorb it, so it must be watered frequently at the beginning to achieve the purpose of slow penetration.

2. Observe diligently.

One is to observe whether the plant has signs of water shortage, and the other is to observe the surface of the soil, if there are signs of whitish pine needle soil, it means that there is a shortage of water and need to be watered in time.

Put the pot in the bucket, the water surface should not exceed the pot, soak for 10 to 20 minutes, and it will be completely thorough. Pour it repeatedly with two pots, and you can see through it after pouring it 10 times.

You can add a part of vermiculite to the soil, the function of vermiculite is to absorb water and retain water, if you mix it and water it directly, vermiculite will absorb water, which is a common method. Because vermiculite also contains minerals.

You can loosen the soil first. Before watering, you can turn the land up and then water it so that the water doesn't penetrate? But the turning area needs to be separated from each other, and don't turn all the ground.

It's easy to solve! Soak in water for 20 minutes, if not, it will take time to finish!

Pine needles are oily, should not be dried directly into the pot, if you really want to pick up pine needles, pick up the kind of pine needles that have rotted in the wild.

It also needs to be spread out for drying and insecticide disinfection, and disinfection can be planted directly.

The advantages of pine needle soil are mainly summarized as follows:1 Lightweight texture and wide coverage.

2. It has better moisturizing effect and can effectively prevent and control soil erosion.

3 It has a better insect repellent effect, such as termites, so it can better protect garden plants.

It is said that pine needles are good for flowers! How to make pine needle soil, the method is not so simple!

The pine needles that can be used should be the kind that have turned brown over the years, and the soil should be disinfected and sterilized before use--- usually scalded with boiling water.

If you pick it up, it's dry, and if you want to dry it, how long will it take?

Summary. Soil quality can be improved by removing a portion of the pine needles to allow the soil to air underneath, or by adding other organic matter.

Soil quality can be improved by removing a portion of the pine needles to allow the soil to air underneath, or by adding other organic matter.

Excuse me, but please go into more detail?

If pine needles are mixed directly into the soil, the soil will become more loose and permeable, increasing its air and water content, which is conducive to the growth of plants. However, if there are too many pine needles, it may affect the pH and nutrient content of the soil. If you find that there are too many pine needles mixed with soil, you can consider adding other organic matter to balance the soil structure, such as decompost, straw, etc.

In addition, we can also carefully observe the growth of the plant and make adjustments and corrections in time. It is best to mix the pine needles well before fertilization to avoid the situation of pure pine needle covering, which will affect the effect of filial piety and longevity.

I think I can plow the land first and then water it. It will be a lot more convenient.

Generally, it is artificially loosened for watering, and the other costs are relatively high.

I think it is possible to loosen the soil properly, or add something that can loosen the soil into it.

This can be loosened a bit, which may have a good effect.

Yes, but dried pine needles can be raised directly in pots to increase the nutrition of pots, and fresh pine needles are not suitable for direct pot raising. The main reason is that it is not fermented and buried in the potting soil, which will burn the root system of the flower due to the heat generated during the fermentation process.

Extended Materials. 1. The benefits of pine needle soil.

Pine needle soil generally refers to the black pine needles after natural fall, mixed with the soil on the ground, after a long time of continuous accumulation and rain irrigation, when the temperature rises after fermentation and blackening, the pine needles at this time nutrients are all decomposed, this is what people refer to pine needle soil.