How to prevent all ceramic floor tiles from falling off the wall, hollowing and large scale falling

Most people will use ceramic tiles when decorating, ceramic tiles are a decorative material, whether it is a living room or a bathroom, they will use tiles to lay. Ceramic tiles are cost-effective, and durable, in the tile laying, but also to master the skills, so as to avoid the problem of magnetic adhesive falling off. Due to the uneven craftsmanship of the tiling master, the quality of the tile is also good or bad, accidentally encountered a poor master, the quality of the tile is not good, then it will fall off in a large area, which is a headache for the owner.

Large-scale peeling off of tiles will not only affect daily use, but also cause injuries to personnel. If you want to avoid tile hollowing and falling off, then you need to pay attention to some things. The easiest way to determine whether the tiles in your home are hollow is to use the percussion method.

Hit the tile with a metal rod, if you hear a crisp sound, it means that the tile has a hollow drum phenomenon, and the tiler master can remove it and re-pave it. <>

Hitting the 4 corners of the tile with a metal stick makes a dull sound, indicating that the tile is firmly paved. When buying tiles, be sure to check the water absorption rate of the tiles. It is necessary to avoid choosing tiles with excessive water absorption, which are easy to absorb water and expand in the process of use, and there will be a phenomenon of hollowing and falling off.

When buying ceramic tiles, you must go to a regular manufacturer to buy, compare more, and contact the manufacturer in time if you find that there is a quality problem. <>

In order to avoid the phenomenon of falling off on an empty stomach, when choosing tiles, it is necessary to pay attention to avoid choosing tiles with too shallow back lines. The texture on the back is too shallow, and the brick master is prone to falling off when laying cement mortar. It is very important to pave tiles, and it is necessary to hire a professional construction team.

The ratio of cement and sand must be carried out in accordance with the strict ratio, if the ratio of cement mortar is high, then there will be excessive water loss, and it is easy to hollow in the process of paving. Laying tiles can be carried out by a professional decoration company, not to blindly save costs.

Attention should be paid to the selection of regular building materials and the construction in accordance with the standard process requirements. Formal building materials include cement and floor tiles themselves, and high-quality materials should be purchased, and the floor tiles should be pretreated according to the requirements such as soaking in water, and then the wall operation should be carried out. Attention should be paid to the use of sufficient cement mortar, and ensure that the corners and planes of the floor tiles are evenly fitted.

Some owners use floor tiles with a large self-weight, and often choose special tile adhesives to increase the stability of the decoration.

The best way is to plaster more cement on the back of the tile, try to smooth the cement and then paste it, so that it is not easy to fall off.

The full-time floor tile wall treatment must be in place in the early stage, and a professional master must be asked to do each process in place, so as to prevent the hollow drum from falling off.

When decorating a new house, how to avoid the problem of hollowing and falling off tiles? In order to prevent empty barrels and falling off, the wall base must be cleaned, and all kinds of dirt on the wall should be cleaned and watered the day before, with a general humidity of 3070%. If the base layer is a new wall, the cement mortar should be lined with bricks, wires, and tiles when it is made into seven stems.

Before using the tile, be sure to clean it, soak the tile with clean water until there are no bubbles, and then take it out, and wait for the surface air to dry before it can be fixed. When necessary, the cement mortar is mixed with 108 glue with a cement weight of 3% and 5%, so that the adhesive mortar is easy to retain water and has a certain retarding effect, which can not only increase the cohesion, but also reduce the thickness of the adhesive layer, and facilitate the guarantee of coagulation quality.

<> construction should be in strict accordance with the standard operation, the specific paste procedures for basic cleaning treatment, wipe the bottom ash, select bricks, soak, brick row, elastic line, paste standard points, paste tiles, hooks, wipe joints, cleaning. During construction, the tiles must be clean, and the bonding thickness should be in line with the construction specifications, and should not be too thick or too thin. When pasting, to make the face brick and the bottom paste dense, you can use a wooden hammer to gently knock it.

When making empty barrels, the porcelain bricks should be removed, the original adhesive sand should be shoveled off, and re-paved. There are plaster, latex paint, wallpaper and other decorations on the wall, or there is dirt on the ground, which must be cleaned up, otherwise the cement mortar is not firmly bonded to the base layer; In addition, if there are cracks in the wall itself, they should be properly treated before bricklaying to avoid cracking or falling off the tiles, and the cracks in the foundation structure will become larger later; Also, for the flatness or verticality gap is too large for the ground and wall, it is necessary to use cement mortar leveling, and the color difference of the tiles before paving should be compared.

When laying bricks, the ground is not coated with cement bricks, knock it flat, coat the cement slurry with floor tiles, spread it on the ground, and the diagonal position of the four bricks is flush. And the order of burial is also very particular. Tiles should be glued from the inside out.

If there is a slope or floor drain in the ground, care should be taken to determine the slope according to the direction of drainage. The wall tiles should be paved from the bottom up, for the sake of aesthetics, the wall tiles should be pasted and then the bottom of the bricks should be pasted, and then the floor tiles should be pressed. In addition, a wall should not be glued to it to prevent the tile from collapsing due to its heavy weight.

After laying the floor tiles, do not step on them for a short time.

Especially when paving porcelain tiles with a large area, more attention should be paid to reserving sufficient expansion joints to ensure the required shrinkage. There is no special process requirement for porcelain tiles, according to the traditional pasting method, but when paving, attention should be paid to the grouting and exhaust in the bottom layer of the mortar, check whether the density is consistent, such as local loosening, to add the grouting and exhaust again, and coat the brick back with 3mm thick pure cement mud to knock flat to complete the paving.

First of all, when buying tiles, we should try to choose tiles with a relatively small water absorption rate, and then soak in water before using imitation hidden guesses, and use coarse sand when preparing cement, the oak hall also uses coarse sand, which can solve these problems.

First of all, we must choose the right mortar, so that we can effectively avoid this problem, we must ensure that it is smooth, and we can also avoid hollowing.

Before tiling the new house, it is necessary to keep the wall very flat to avoid these problems.

When the tile is paved, the mortar is not full or the tile is not gently knocked and squeezed compactly; The tiles are not soaked in water or soaked enough before they are laid; The plastering of the base layer of the wall is not treated as required or the garbage of the base layer is not cleaned up.

The tiles should be soaked in water for more than 2 hours before paving, so that the tiles can fully absorb water, and then take out the shade to dry or wipe the clear water; Check whether the plastering of the wall base meets the requirements, and the stolen goods and dust of the wall base must be cleaned; When paving, the back of the tile is covered with cement mixed mortar or 108 cement slurry and the wooden handle of a small shovel is tapped on the tile, so that the cement grout crowds the back of the tile, and then pressed hard to make the tile firmly combined with the wall base.

In one case, it is because the workers are not serious about their work.

In our modern home decoration, many of our wall and floor tiles will be used, but after the use of wall and floor tiles for a period of time, some local tiles will appear hollow or fall off, which not only makes our living room look very unsightly, but also makes the wall and floor tiles lose their effect, for such a phenomenon, how should we solve it? Today, I will talk to you about the small ways to avoid hollowing out the wall and floor tiles.

First of all, during construction, the cement slurry binding layer should be evenly painted, and the painting time should not be too long, so as to prevent the air from drying and hardening, so as to cause the separation of the stove stool layer and the base layer, resulting in bulging.

Second, the small way to avoid hollowing out the wall and floor tiles 2

It is necessary to mix the mortar according to the proportion, not add water casually, and the mortar should be dry and hard, and it is better to control the general thickness of about two to three centimeters.

3. Small ways to avoid hollowing out wall and floor tiles 3

When laying the floor tiles, we first need to clean the back of the floating dust, and water it wet, so as to ensure that its bonding is relatively good.

Fourth, the small way to avoid hollowing the wall and floor tiles 4

When paving the floor tiles, the four corners are pressed hard at the same time to make it parallel to the mortar and two to three centimeters higher than the pull line, and then hit with a wooden or rubber hammer, and the face is leveled with a level; After paving a piece, pave it sequentially to the sides or in the backward direction; If you find that there is a phenomenon of sagging, you should lift the tiles and flatten them with mortar before paving.

This situation generally has the following several reasons, the first is that the brick master is not serious about the mortar is not filled, this is generally a local hollow, the problem is not big, the second reason is that the wall is too dirty and the powder layer is not clean, the mortar is dry and the wall does not have a good bonding effect, the probability of falling off should be noted.

This is because the tile is not soaked in water, or it may be because of the choice of tile adhesive problems, be sure to choose the right tile, you need to pay attention to the choice of tile adhesive.

In the process of tiling, if you do not choose the right tile adhesive or there is a problem with the cement ratio used, it is likely that the hollow drum will fall off. Extra care should be taken during construction.

The contact between the tile and the wall and the floor is insufficient, resulting in the loss of support, and the bearing leads to problems such as falling off, arching, inability to drill, cracking, etc. Most of the hollow drums appear in the four corners of the tiles, one or more of them, here is a detection method, five-point percussion detection method: use a metal rod to hit the four corners and the center of the tile, and judge whether the tile is a hollow drum by the sound of percussion.

If the percussion sound is more muffled, the paving is more solid. On the contrary, the sound of "dong dong dong" is clear, indicating that the walls and floor tiles are not well paved, and there are hollow drums. The hollow drum rate is also the standard, the hollow drum rate of the floor tiles should be controlled within 3%, and the main channel can not be hollowed; The empty bucket of wall tiles needs to be controlled within 5%, that is, the empty bucket area of the tiles cannot exceed 5% of the tile area.

After the home is renovated, if the tiles on the wall are hollow and fall off, it is estimated that everyone will be very depressed at this time. Then I will think, how can we ensure that the wall tiles we paste do not appear hollowing and falling off? Let's go to the point where we need to know a little bit about this.

The most fundamental reason for the natural fall off of ceramic tiles is that the bonding is not good, there are many types of tiles, such as porcelain tiles, vitrified tiles, glazed tiles, etc., although they are all ceramic tiles, but the construction method is slightly different. This mainly depends on the craftsmanship of the bricklayer, bonding is the main reason, and other reasons also have a certain influence.

Decoration is a very hard thing, from the material into the decoration workers to start the decoration, running back and forth every day, the material, the construction progress, the master's craftsmanship are all in mind, I am afraid that it is not easy to decorate once, there are such and such problems. Finally, the decoration was completed, and it didn't take long for the tiles to fall off, and think about how bad it should be. When paving tiles, no bottom sealing treatment is carried out, or inferior stone bottom sealants are used, resulting in too fast evaporation of water at the bottom after paving, and a gap is formed between the adhesive and the stone, resulting in hollowing of tiles and other bulging phenomena.

Generally speaking, the natural falling off of tiles is the bathroom, kitchen, balcony, and other spaces with relatively harsh environments, and the wall is hollow, and falling off is a thorny problem. There are two phenomena of tile peeling, one is that the tile itself and the adhesive layer fall off, in this case, the back of the tile is clean, without cement mortar or tile mortise. If you use a full tile, it is easier to fall off if you don't use the back glue, and the whole tile does not absorb water.