What are the precautions for sealing glaze and what is the function of sealing glaze?

The basic principle of sealing glaze is to rely on the shock polishing technology to repeatedly and deeply press the glaze into the texture of the car paint to form a special network protective film, so as to improve the gloss and hardness of the original car paint, so that the car paint can better resist the invasion of the external environment, effectively reduce scratches, and maintain the brightness of the car paint. Before sealing the glaze, the whole car should be polished first to avoid the isolation of the oxide layer between the glaze and the paint surface, which will affect the sealing effect. Compared with ordinary wax, the sealing glaze has obvious advantages in gloss, wear resistance, paint protection effect and durability.

In terms of gloss, the gloss of the car using glazing technology can reach more than 95. In terms of wear resistance, the sealing glaze can form a hard protective layer on the surface of the paint layer to prevent the wear caused by wind and sand weather, sediment splashing and long-term car washing, while ordinary car wax is only attached to the surface, the protective film is very thin, and the wear resistance is low.

Just after sealing the glaze, you should pay special attention:

Remember not to rinse the car with water within 8 hours after sealing the glaze, because during this time, the glaze layer will continue to penetrate before it has completely condensed, and the rinse will wash away the uncondensed glaze.

Try to avoid washing the car after the glaze is done, because the product can be anti-static, so the dust can be wiped off with a clean and soft cloth.

Do not wax again after glazing, because the wax layer may adhere to the surface of the glaze layer, and the sealing effect will be affected by the isolation of the wax layer when adding glazing.

1. Glazing should be insisted on, and car beauty service providers should provide long-term glazing services after the first glazing, once every 1 2 months. Because in the periodic glazing process, the glaze that has been oxidized on the surface can be removed, and the glaze can be re-glazed at the same time. This is how it retains its shine for a long time.

2. Due to the insolubility of the glaze, it must be explained to the master before repairing the paint, otherwise the new paint and the old paint surface cannot be melted. 3. Try to polish as little as possible, and the polishing should be aimed at the scratches that cannot be removed by general grinding. 4. In order to recommend the glaze sealing service, please ask the car beauty service provider not to deify the glaze, but to publicize it truthfully, the most important thing is to lower the glaze, especially the follow-up service.

Of course, it can't be cheaper than waxing) 5. The hardness of the glaze is limited, it is impossible to prevent scratches, and maintaining the luster is the biggest feature!

Midsummer fruits. Regarding the question you asked, I personally think that it is necessary to seal the glaze and chassis sealing of the new car, and there is no need to do it after the run-in period. Because although the original factory itself is also sealed, it is only done at the lowest part of the chassis, and there are basically no other parts.

After the chassis is sealed, it will play a very beneficial role in protecting the chassis part of the vehicle in the future, especially when running on gravel roads and rain, snow and ridge weather, it will play a protective role in the chassis, which is definitely beneficial and harmless to the vehicle. The glaze can improve the hardness of the paint surface to a certain extent, with anti-ultraviolet radiation, anti-rain and snow acid and alkali erosion, windproof sand blowing, delay the paint is oxidized and cause fading, in addition to the glaze can also be fire-proof, oil-proof and light hard scratches. The glaze is pressed on the surface of the paint by the high-frequency vibration of the machine, which can make the protective layer achieve the purpose of protecting the paint surface.

After the glaze is sealed, there is no need to wax again.

Remind you that it is best not to use the waxing method, because as long as waxing, it is applied to the paint with wax, and the brightness of the paint is increased by manual rapid friction or high-speed rotating polishing machine. Therefore, whether it is a decoration shop or doing it yourself, it will damage the surface of the car paint, resulting in the appearance of sun lines, and the more operations, the thinner the bright oil part of the car paint surface, and eventually cause the car paint to stain.

The body enameled wire paint surface can achieve or even surpass the original paint effect, making the old car new, the new car brighter, and at the same time has the characteristics of high temperature resistance, sealing, oxidation resistance, brightening, washing resistance, corrosion resistance and so on. and also lay the foundation for the car beauty, paint and refurbishment of the future.

Sealing glaze refers to the use of soft wool or sponge through the high-speed vibration and friction of the vibratory polishing machine, using the unique permeability and adhesion of the glaze, the glaze molecules are strongly penetrated into the gaps of the automobile surface and paint. Sealing glaze is to shock the polymer glaze into the pores of the paint surface to form a firm network protective layer attached to the paint surface, improve the gloss and hardness of the original paint surface, make the paint better resist the invasion of the external environment, effectively reduce scratches, and maintain the brightness of the paint surface,[1] so as to achieve the purpose of protecting the paint surface.

When driving on various roads, it is easy to cling dirty. Soon after the freshly washed car is driven out, the paint will turn gray again. However, the non-stick and non-stick characteristics of the glaze make the paint surface clean for a long time even in harsh and polluted environments, and can effectively resist the influence of temperature on the car paint.

It has the functions of acid resistance, alkali resistance, anti-fading, anti-oxidation, anti-static, high fidelity and so on. Sealing glaze can effectively reduce the surface roughness, reduce the friction between the paint surface and the outside world, so as to better protect the paint surface. However, the sealing glaze itself is limited by its material and construction method.

After buying a new car, you can seal the glaze, and you can keep the brightness and brilliance of the car paint forever. Using a second-hand car as a sealing glaze can restore the brightening and oxidizing faded paint, which is quite refreshing. Most of the prototypes at the show are glazed, so they look crystal clear and shiny.

So the car wants to protect its car and give the car a long-lasting brilliance. Glazing is a good way to do this. Sealing glaze is an alternative to waxing.

Generally, there is no need to wax within half a year after glazing.

Millions of car purchase subsidies.