Can laminate flooring be laid on top of existing tiled floors? What is the reason?

Laminate flooringIt can be laid on the original tile floor, because it will be smoother on the original tile floor, and it is easier to lay the wooden floor, which can speed up the decoration progress and save decoration time.

Social and economic development is getting faster and faster, and people's requirements for their quality of life are getting higher and higher. Using the old tile underlay and laying a wooden floor on top can not only maintain the flatness of the indoor floor, but also speed up the renovation process, which can be said to kill two birds with one stone.

What are the advantages of laminate flooring compared to ordinary flooring?

The hardness of laminate flooring is not as large as that of ceramic tiles, for ceramic tiles, there will be a cold feeling in winter, the foot feeling of tiles will be more comfortable, there are elderly people or families with children at home, the choice of laminate flooring can better avoid bumps, from the point of view of non-slip, ordinary flooring is particularly smooth for the surface of ceramic tiles, once it is wet, it will become more slippery, for families who maintain hygiene at home at all times, it is easier to produce the risk of falling, and laminate flooring does not have this trouble.

What are the disadvantages of laminate flooring?

Everything has two sides, and the same is true for the choice of flooring: the base material of laminate flooring is density, fiberboard.

Contains a certain amount of formaldehyde, long-term use of laminate flooring, will also affect people's health, and normalize, the floor in the process of use, if there is moisture or soaking in water, it is likely to appear deformation and hollowing, etc., the above is the advantages and disadvantages of laminate flooring, we must understand the relevant knowledge before choosing.

Laminate flooring has scratches, what to do?

I think that laminate flooring can be laid on the original tile floor, which can also be more economical and environmentally friendly to meet our use requirements, but it should be noted that laminate flooring, in the process of use, there are likely to be surface scratches, at this time we can first clean the laminate flooring, and then apply repair agent to the scratches to repair.

Of course not. This method of laying may cause the two floors to crack, or it may cause the floor to be subjected to more stress, which can lead to cracks in the floor.

No, you cannot. If it is not on the original tile, the viscosity is not particularly good, so it is easy to have some problems when using it.

No. The reason is that this way of tiling will cause both floors to be seriously damaged, and they cannot withstand heavy objects, which will cause the floor to crack.

Floor tiles. The floor can be laid directly. Flooring requires a solid and level floor.

The tiles that were previously laid on the floor can meet this requirement. However, because the floor of the whole house is kept level when the bricks are laid in the early stage, the floor will be more than the door stone at the door of the kitchen and bathroom.

high, so the closure needs to be reprocessed. This problem needs to be dealt with. Unless the floor tiles of the kitchen and bathroom are to be re-pasted, the stone at the entrance of the kitchen and bathroom should be kept at the same level as the wooden floor of the living room.

Otherwise, there will be a phenomenon that the closing place will hang up because of the height difference. Not only the renovation of second-hand houses, but also many owners first lay a layer of floor tiles and then floor when renovating a new house. Floor tiles should not be too high-end, you can go to the building materials market to find sample bricks, it doesn't matter if the color is different, as long as the specifications are consistent, it is very cheap.

The key is to control the flatness and not have empty drums.

Laminate flooring on tiles.

is better, very flat and not dust-free. Wooden floors are also fine, and the feeling of softness and elasticity on them is almost as good.

Generally, our common laying of flooring is to first lay moisture-proof cotton on the ground, and if it is a solid wood floor, it also needs to be laid with keel. In addition to paying attention to moisture-proof work, it is more important to pay attention to laying the floor smoothly. Pay attention to this problem when laying on floor tiles.

Make sure the floor tiles are flat before laying them so that they don't bulge out on the floor.

Formaldehyde takes 20 years to evaporate, which is very harmful to the body. I have used a formaldehyde tester to test formaldehyde for hundreds of neighbors in the community, and the excess rate of wood flooring at home is more than 80 percent, while only 20 percent of those who do not use wood flooring exceed the standard. If you have children or the elderly at home, you must be cautious, and the whole house tile is still the best solution.

It's completely okay, at the end of last year, a household was constructed, and the tile upper floor is generally tiled, and the parquet is mostly selected.

and laminate flooring. It is also very simple to deal with, if the floor tiles do not fall off, you can directly lay a moisture-proof film on the floor tiles and install the floor. If the floor tiles are falling off, use cement mortar.

Smooth and dry before installing. In general, the materials and wages of the sweeping.

It can be omitted. <>

It is possible to lay the floor directly on the tile. This saves time and costs without compromising on the finish of the floor. It can also save labor and remove the tiles.

The first is the tile flooring, which is fine. As long as the flatness of the ground meets the pavement requirements, it can be done. Laminate flooring is not recommended on top of wooden flooring.

If you want to re-lay the floor at home, you can't directly lay it on the basis of tiles. Because the tiles themselves are very slippery, if you lay the floor on the basis of the old tiles, it will be unstable.

It's best not to, because this will affect the overall effect, or you need to get rid of the original one, and then lay new floor tiles on it, so that the effect will be better.

No, because the shrinkage of the tile and the floor are not passable, and there is no way to combine the two.

Summary. Hello, whether the concrete floor can be directly laid depends on the actual situation of your home. If the ground base of your home is better, then you can abandon the wooden keel and directly lay the floor, but remember to do a good job of moisture-proof!

If the ground base of your home is potholed and very uneven, in this case, your home is not suitable for laying wooden floors directly, but should first use wooden keels to lay the foundation, and then you can put some insect repellent drugs and the like in the place of wooden keels to increase the life of wooden keels, and finally lay the floor.

Can laminate flooring be applied directly to hardwood flooring? In order to change the color.

What to look out for? Do you need to put a layer of aluminum film in the middle of the floor? Is it better to be two centimeters or three centimeters thick?

If there is a part of the original floor that is not very flat, can it be adjusted?

Hello, whether the concrete floor can be directly paved should be based on the actual situation of your home. If the ground base of your home is better, then you can abandon the wooden keel and directly lay the floor, but remember to do a good job of moisture-proof! If the ground base of your home is potholed and very uneven, in this case, your home is not suitable for directly laying wooden floors, but should first use wooden keels as a base, and then you can put some anti-trembling insects and the like in the place of wooden keels to increase the life of wooden keels, and finally pave the floor.

Please understand my question.

My current home has hardwood floors.

Hello, this is completely okay, as long as the ground is flat, you can directly shop the round pants! If it is uneven, it will be leveled and then paved! On the tiles, the wooden floors are all chained and trembling can directly lay the wooden floor!

How to level? Tools Raw material repair mortar elastic sealant blowtorch concrete method Step (1) First, clean the expansion joints of the damaged road surface, remove all the debris that may affect the deformation of the expansion joints, and then fill the joints with elastic airtight cover dust code sealant; (2) Cutting along the surrounding boundary of the pit to form a vertical façade with a depth of more than 3cm around the periphery; (3) Thoroughly clean the pit and remove all loose and loose parts until it is firmly layered; (4) Check whether the cleaned pit is dry, otherwise it should be dried or dried with a blowtorch; (5) Paint a layer of repair mortar at the interface of the pit and wait for about 30 seconds; (6) Pouring solidified concrete, after pouring to vibrate and compact; (7) Stir the powder for more than 2 minutes before use, so that the inside is completely uniform; (8) When using, the water is distributed in the corresponding proportion until it reaches a viscous state; (9) Pour concrete into the pit to be repaired, and constantly vibrate to make it compact; (10) Finally complete the pit repair.

The disadvantages of laying laminate flooring directly on the floor tiles: the wooden floor is prone to noise, sliding and displacement. And because the surface of the floor tiles does not absorb water, the wooden floor is easily deformed by moisture.

Before laying laminate flooring on the floor tiles, check whether the floor tiles are loose, and if there are loose floor tiles, it is best to ask the construction team to help fix them. Secondly, it is necessary to measure the flatness to see whether the original floor tiles are laid horizontally, if the original tile leveling is very good, there is no need for leveling. Other things to note are that there is a drop in the height of the floor between the space with the additional floor and the space without the floor, and the joint should be treated well so as not to affect the appearance.

Also, pay attention to the ground clearance of the door.

Laminate flooring is generally composed of four layers of materials, namely a wear-resistant layer, a decorative layer, a high-density substrate layer, and a balanced (moisture-proof) layer. Qualified laminate flooring is made with one or more layers of special impregnated thermosetting amino resin. It is covered on the surface of substrates such as high-density boards, and the back is made by adding a balanced moisture-proof layer, adding a decorative layer and a wear-resistant layer on the front.

Painting snakes is against low-carbon life! His eldest uncle and his second uncle are all his uncles, and the floor bricks and wooden floors are all floors!

The disadvantages of laying laminate flooring directly on the floor tiles: 1. The surface of the floor tiles is smooth, and the wooden floor is prone to noise; 2. The surface of the floor tile does not absorb water, and the wooden floor is easy to be deformed by moisture; 3. The wooden floor cannot be fixed on the floor tiles, and it is easy to slide and displace

Yes, just add a thin pad. Generally, this is how it is constructed.

A few points to pay attention to when installing laminate flooring:

1. After the floor is just laid, it is necessary to keep the indoor air circulation.

2. Overweight items should be placed smoothly, and furniture and heavy objects should not be pushed, pulled and dragged hard, so as not to scratch the surface of the wear-resistant layer.

3. Do not scrape or scratch the surface of the floor with sharp tools.

4. Do not soak the floor with water during use, and if there is an accident, you should mop the floor with a dry mop in time.

5. Keep the floor dry and clean, and if there is dirt on the surface of the floor, generally wipe it dry with a dripping mop.

6. Prevent the floor from being deformed by the cooking utensils.

7. A rubbing mat should be placed in front of the door to reduce the wear and tear of sand particles on the floor.

8. Use a special floor cleaner to remove spots and stains. Do not clean with items with damaging properties, such as metal tools, nylon friction pads, and bleaching powder.

1. The surface of the floor tiles is smooth, and the wooden floor is prone to noise;

2. The surface of the floor tile does not absorb water, and the wooden floor is easy to be deformed by moisture;

3. The wooden floor cannot be fixed on the floor tiles, and it is easy to slide and displace

Summary. Laying an extra layer of laminate flooring is not recommended. Because laminate flooring is already a more wear-resistant flooring material, if you lay another layer of flooring, it may lead to an increase in the height of the floor, resulting in unevenness, and may affect the opening and closing of the room door, and even affect the overall appearance.

If you want to replace the flooring, it is advisable to remove the original laminate flooring and reinstall the new flooring. This ensures that the floor is flat and stable, and that the new floor will last and last. It is best to consult a professional flooring installer or decorator for evaluation and advice before any flooring is laid.

Laying an extra layer of laminate flooring is not recommended. Because laminate flooring is already a more wear-resistant flooring material, if another layer of flooring is laid, it may lead to an increase in the degree of ground masters, resulting in unevenness, and may affect the opening and closing of the room door, and even affect the overall appearance. If you want to replace the flooring, it is advisable to remove the original laminate flooring and reinstall the new flooring.

This ensures that the floor is flat and stable, and that the new floor will last and last. Before any flooring, it is best to consult a professional flooring installer or a Xianghuai decorator for evaluation and Bibi advice.

Can you tell us more about that?

A: Laying another layer of flooring on laminate flooring will not work. Explain why:

1.Thickness problem: Laminate flooring already has a certain thickness, and laying another layer of flooring will increase the overall thickness of the floor, which may lead to insufficient space between the floor and the floor, which in turn will lead to an unstable or uneven floor.

2.Hardness problem: Laminate flooring is usually made of composite material, which has a certain elasticity and softness, and can adapt to changes in the ground and compensate for unevenness.

If a layer of harder flooring is placed on top of it, it may make the overall floor too hardened and unable to adapt to small changes in the floor, which may cause the floor to deform, crack or be damaged. 3.Stability issues:

Laminate flooring is connected to the ground through certain installation methods and fixing methods to form a stable structure. If another layer of flooring is laid on top of it, the connection between the original floor and the ground may be damaged, resulting in the stability of the overall floor being affected by the round denier. Content Extension:

If you want to change the appearance or texture of the floor, you can consider replacing the entire flooring directly, or using renovation, painting and other methods to beautify the original floor. Before making any floor changes or renovations, it is recommended to consult a professional bridge cavity floor installer or renovator to ensure proper and safe operation.