Just after the renovation found that the floor tiles are cracked and small, what kind of remedy is t

Balconies, kitchens, and bathrooms are mainly pasted with wall tiles and floor tiles. Everyone knows very well that the decoration paste tile is a difficult decoration, and there may be one or another quality problem. Although paving floor tiles is not a difficult task for us "masters", it is not a technical job for us, and we do not plan to take this craft to "show", use toner to adjust the color close to the original tile, fill in the vacancy of the porcelain surface, harden and polish it with water grinding, and then apply a layer of paraffin wax to make it crystal clear.

The popular tile paste is similar to water-resistant putty, which can be applied evenly with your fingers, and if there is any excess toothpaste around, you can wipe it clean with a rag. After applying, wait for a few minutes to let the toothpaste dry naturally, and wait until the toothpaste is dry after the cracks on the tiles will be repaired by the toothpaste, and the cracked floor tiles are best replaced, especially the toilet, which will also affect the leakage, no matter how to repair it, it will also affect the appearance, if it is other places, it can also be glued with decals.

Because the cement is not fully coated during the decoration, if the middle is empty, it may be broken, and there is no way to make up for it. If there are a few extra floor tiles when decorating (decorators buy more floor tiles when they buy them, because they may also be broken during operation) you can make up the solution: buy a little better floor wax with color fine-tuned to a similar color to the floor color and then wax, the effect will be good, the brackets are not serious, you can DIY yourself, the method is to use an oil-based marker or crayon of the same color to paint, find a repairer to repair.

After a while. Cracked again. Not to mention that the money was spent.

Also troublesome. Treat the symptoms but not the root cause. The floor tiles are cracked.

If the amount is small and you can find floor tiles of the same quality and color, it is better to find a master to replace them. If it weren't for the reason of the house itself, there is now a special tile repair, and it will not be visible after the repair. If the cracking is caused by the house itself, it may be necessary to solve the cause first and then replace or repair the bricks.

You can use the car paint repair pen that is easy to purchase in the market, and apply it directly after cleaning the base surface, because the paint in the pen is oily, volatilizes quickly, can be dried in 1-2 minutes, and has a waterproof effect.

Buy that kind of special tile for the top, the kind of thing that is similar to oil paint, and you won't have cracks when you paint it.

You can buy some glue online that is more solid and sticky to floor tiles. Then apply a layer of the same color on top of him. Go buy a new floor tile and replace the old one. In this way, it will be as beautiful as a new house.

The best way is to replace it again, followed by using a sewing agent to sew it, and finally not to deal with anything, because if it is a small portion, people will basically not notice it, and it will not affect the appearance.

Personally, I think that if you find that the floor tiles have small lines after decoration, it is best to redecorate them again at this time, so as to avoid a lot of trouble.

1. You can use toothpaste to repair these cracks, gently squeeze out some toothpaste, and use your fingers to evenly apply the toothpaste to the cracks. Gently wipe off any excess toothpaste around with a cloth or paper towel. Wait until it's dry, and your tiled walls will look like new.

2. Serious cracks can be ignored, anyway, it does not affect the use, but if it is serious, or even the broken bricks are loose, the broken bricks should be knocked down, the ground base layer is removed, and then the bricks are re-laid with high-quality cement and yellow sand.

Let's take a look at the molding method of floor tiles:

2. Fantasy bricks: a variety of system powders, using multi-pipe cloth, belonging to the whole body brick.

3. Italian beige: the combination of micro powder and flower seepage technology.

4. Micronized bricks: the powder is polished once, the particles are fine, and several color powders are mixed according to the ratio and distributed on the bottom embryo.

5. New technology: twin press (horizontal secondary blanking trolley): the first press pre-presses the brick blank, and then prints it onto the brick blank by hard plastic mesh, fine powder, flake particles or dry powder under the action of gravity, and then forms it with the second press.

Gently wipe off any excess toothpaste around you with a cloth or paper towel. When it dries, the tiled walls look like new. If the tiles are colored, buy toothpaste of the corresponding color, or mix gouache paint in white toothpaste, and the effect of applying the gaps in the tiles is just as good.

How to repair tile cracks:

Use tile caulk or waterproof glue to repair, for small tile cracks, you can also use toothpaste to repair, the operation is also very simple, and the visual effect is good. Of course, for professionals, tile paste can be used to repair cracks, the effect will be more obvious, and there will be no falling off, warping and other phenomena after repair.

How to buy tiles:

1. Weigh the tile components.

First of all, you can take a look at the thickness of the tile, the sintering of good quality tiles is fine and high, enough weight, and the weight of better quality tiles is relatively heavier. Secondly, look at whether the tile surface is flat. If the surface of each tile is uneven and crooked, no matter how good the master is, he will not be able to pave the good effect.

2. Look at the appearance of the tiles.

If the brightness of the tile surface is higher, the density of the tile is better. Good brand tiles, the surface has a bright feeling, shining under the light, and the pattern will not be lacking in color.

3. Listen to the sound to distinguish between good and bad.

The sound of the tile is crisp and good, which proves that the quality of the tile is very good, if the sound is mixed and dull, then the texture of the tile is poor, just like the way to distinguish glass and jade, in fact, the method is almost the same, the difference is that to distinguish glass and jade is to listen to its own sound.

4. Check the flatness.

Use two identical tiles stacked on top of each other, with the corners right, to see if there are any gaps and a mass that is not easy to turn. On the contrary, it is easy to rotate, and the quality is not good.

5. Observe the water absorption.

The size of the water absorption on the reverse side of the tile can reflect the texture of the tile. If the water on the reverse side of the tile disappears quickly, it means that the tile has a high water absorption rate. For ceramic tiles, the faster they absorb water, the weaker their strength.

On the contrary, the tile absorbs less water, and the slower it seeps, the better the quality of the sintering, and the poor brick not only seeps fast, but also is easy to deform and is not durable.

If it is a small crack, you can use tile plaster caulk. If the crack is relatively large, be sure to use marble glue and then add toner to repair it.

The cracked parts of the tile should be cleaned first, then the edges should be sanded and smoothed, patching paste should be added, then thoroughly dried, and finally dried.

If you find that there are many cracks in the tiles, you can go to the beautiful joints, so that the tiles can be good-looking, and there are no cracks, and it will also make the home go to a higher level.

In order to protect the ground and facilitate cleaning, everyone will install floor tiles when decorating, floor tiles are now indispensable in life, and every household is installed, but everyone will also talk about some problems, and after a long time, there will be cracks in the floor tiles. Once there are cracks in the floor tiles, it means that the use time is too long, and we need to guess that the hail base requires us to repair them in time, but the repair of cracks in the floor tiles is not as simple as we imagined, it has specific steps and methods, here we will learn it.

How to repair cracks in the floor

1. The situation of small cracks in ceramic tiles is more common, if the conventional repair method is adopted, the porcelain floor tiles are replaced after breaking, which is time-consuming and labor-intensive, which has a greater impact on the operation of the guest room.

2. For small cracks and small damages, you can use the car paint repair pen that is easy to purchase in the market, and paint directly after cleaning the base surface, because the paint in the pen is oily, volatilizes quickly, and can be dried within 1-2 minutes, and has a waterproof effect. After testing in individual hotels, the effect is better!

3. Car paint repair pens are easy to buy in supermarkets and automobile markets, ** at 10-15 yuan, a small repair that can use 15-20 porcelain floor tiles. The cost is around the yuan. In particular, the small repair effect on the yellow porcelain floor tiles is better.

Floor repair method

Hollow drum processing. Gently tap the bricks on the plane with a small hammer, when you hear the sound of clanging, relatively hollow, it proves that the tiles have a hollow drum phenomenon, the hollow drum of the wall tiles may cause falling off, bringing potential safety hazards, and the hollow drum of the floor tiles will lead to arching and warping, which is detrimental to the appearance. For the difference in the area of the hollow drum, we can do different treatment.

Hollow corners. If you find that there is a hollow drum on the edge of the tile, you can water the part of the hollow drum on the edge (smash the gap between the tiles with a small shovel, and then pour the cement with water into the gap, and the hollow drum will automatically suck in until it is filled and solidified), so as to avoid overall replacement.

Partial hollowing. A small amount of local hollowing of the tiles on the wall and floor, such as without affecting the stable installation of furniture and appliances such as cabinets, mirror cabinets, showers and water heaters, can not be treated, but if it affects the installation and daily life, it is recommended to knock off the local tiles and re-pave.

Fall off and re-stick. When the tiles fall off directly due to improper construction or aging problems, how to paste the bricks back again, in addition to the necessary basic process, there are also different treatment situations according to the mortar of the residual wall.

The repair of cracks in floor tiles requires everyone to master certain skills, if we do not master the skills, it is difficult for us to complete, and it is very laborious to complete, so mastering the skills is the key. It is not enough to master the repair method of floor tile cracks, but also to have enough patience and carefulness, cracks are often very subtle gaps, repairing will be quite difficult, and it will take a certain amount of time, so patience is necessary, in order to ensure that the repair will not affect everyone's use, in the process of repair, we must also be careful.

You can get it for free

Sticking wall and floor tiles is a tedious job, and few people want to face the problem of wall tile cracking. However, what if this kind of problem arises? Here are some workarounds:

1.Check the cause.

First of all, you need to check the cause of tile cracking. Check whether the wall surface has cracks, whether it is flat, whether there is enough drying time before treatment, material quality, etc. If you find cracks or uneven walls, you need to fix them before re-applying the tiles.

2.Determine the type and size of tiles.

Depending on the type and size of the tile, the process and difficulty of tiling are also different. For smaller cracks, filler tiles can be used to repair, but large cracks require more time and patience. Use ceramic tile caulk to put the tiles together, almost identical to the surrounding tiles.

3.Replace the tiles.

If the cracked tile cannot be repaired, it needs to be replaced. A chisel can be used to remove the broken tiles from the wall. Then reinstall the smaller floor tiles. For the removal of very large tiles, it is best to have a professional worker do it to avoid damaging the surrounding tiles and walls.

4.Device-related issues.

If the crack is related to the installation equipment, the installation needs to be inspected. Check that it has been installed correctly and that there is sufficient bedding material and level. Bedding materials include cement slabs and formwork, which can make the wall tiles flatter and reduce friction between the tiles.

5.Precautionary measures.

Finally, precautions are more than enough. Check whether the wall is flat before installation, whether there is enough drying time before treatment, choose the best bricks, use brick-laying tools correctly, etc., are all good ways to prevent wall tiles from breaking.

All in all, it is not unusual for cracks to appear in wall and floor tiles, but the above measures can be taken to repair or replace them to prevent recurrence.

Small cracks on the surface of floor tiles can be caused by a variety of factors. Here are some possible reasons:

Improper Installation: Improper installation techniques and careless search or construction methods can lead to cracks in the floor tiles.

Temperature changes: Large temperature changes may cause the floor tiles to shrink and expand, which can lead to sharp cracks.

Unstable foundation: Unstable or settlement of the foundation can lead to cracks in the floor tiles.

High pressure: High pressure, such as the movement of moving furniture and heavy objects, can cause cracks in the floor tiles.

Disrepair: Over time, floor tiles can experience cracks due to not being properly maintained and repaired.

If there are cracks in the floor tiles, it is advisable to seek the help of a professional to determine the cause and take appropriate measures to repair it.

Will it be that the soaking water is not enough, after the cement is paved, when the mortar solidifies, the cement absorbs water unevenly, resulting in the cracking of the tile.

Characteristics of cracked orange lead infiltration: the distribution of cracked tiles is irregular, the cracks are irregular, the crack shape is irregular, and the length is different.

Identification method: Insufficient soaking water causes the cracking of the tile generally appears soon after the tile is paved. [Hope, thank you].

Tile repair fluid is an effective repair agent specifically for tile scratches. You can check it on the Internet, and the repair effect is still relatively obvious. If there are small pits in the tile, consider filling the pit with nail polish and then waiting for it to dry and wipe off the surface.

In fact, generally speaking, if it is some relatively small scratches, you can directly use moist sandpaper to polish the surface smoothly and flatly, then the small scratches will be repaired cleanly, but you should also pay attention to not use too much force when grinding!

The toothpaste we commonly use in our daily life is really an artifact, not only for brushing teeth, but also for filling the cracks in the tiles. Ceramic tiles will inevitably have cracks after being used for a long time, and many people are a little overwhelmed in the face of cracks. When we paste tiles, we will find that some tiles will be uneven because of quality problems, resulting in unevenness no matter how we paste during construction, mainly because of the unevenness of the tile itself, we can thoroughly soak and moisten the tile, and then dry the tile.

Even if the same model of bricks of the same brand, different batches will also have color difference, conditionally, replace all the bricks in the conspicuous place, don't mind the color difference, find a similar color pattern, and replace the bad one. First of all, for very shallow and fine scratches, you can use moist sandpaper to polish, and the surface will be polished smooth and flat, so you will not see it, and you must pay attention to it must be light and not too hard.

Some tile cracks are caused by deformation of the wall, and in general, the tile cracks will appear in a regular pattern in a horizontal, vertical or oblique direction. Treatment: A layer of steel wire mesh can be made on the side of the paving wall tiles to improve the strength and load-bearing capacity of the wall.

For obvious cracks, you can choose a ceramic tile glaze repair agent on the market that is specifically for tile damage, which can achieve the same smooth feeling as new tiles, and will be harder and more wear-resistant.