-
Anonymous users2024-02-13One is to connect the wall with iron to the door, the other is to drive the expansion glue into the gap between the wall and the door to connect the two, I heard others say that the glue is not environmentally friendly, the manufacturer of the customized door said that the iron connection is not reliable, not prolonging the life I don't know how to choose, please consult experienced friends do not hesitate to advise
-
Anonymous users2024-02-12They can change the appearance of doors to make them look more stylish, or they can blend the door into the wall and add a smile to the interior space. In addition, the door sleeve can also increase the insulation performance of the door, reduce the temperature difference between indoor and outdoor, and improve the indoor warmth, thereby saving energy. In short, the bedroom door is not high and the door cover is a good choice, which can make the bedroom door look more stylish, and can also increase the safety and comfort of the room.
-
Anonymous users2024-02-11Points and tips for the installation of the set door.
1.Proofread the holes.
Whether the size of the opening meets the installation requirements, and the necessary treatment should be given if it does not meet the requirements.
2.Unpacking. Check whether the door frame, door sleeve line, door barrier strip, sealing strip, and parts are complete.
3.Assemble the door frame.
When the door frame is assembled, the overlap between the mullion and the transverse frame must be glued and then fixed with self-tapping.
4.Position the door frame.
The door frame is in place according to the indoor elevation line, first clamp the door frame from the perimeter of the door frame with a wooden wedge, and then support the door frame from the inner mouth of the door frame with tooling and a wooden wedge, and adjust the verticality, levelness and inner diameter size of the door frame by clamping the inner and outer wooden wedges of the door frame, so that it meets the design requirements (the gap between the door frame and the door leaf, and the door leaf and the ground are 5-8mm).
5.Glue filling of door frames.
Before filling the styrofoam between the door frame and the wall, the wall should be cleaned first, the wall should be moistened with a watering can, and the styrofoam should be filled.
6.Install the door sleeve wire.
After 4-6 hours of styrofoam curing, remove the tooling and wooden wedge, apply glue in the door frame socket, and then embed the door sleeve line into the door frame, and gently knock and compact to make the door sleeve line and the wall fit tightly.
7.Install the door leaf.
Pay attention to the opening direction of the door, install hardware, and the gap between the door leaf and the door frame meets the design requirements to ensure that the door leaf is open and closed flexibly.
You haven't heard of the suit door having a fallen handle, so feel free to use the suit door.
-
Anonymous users2024-02-10Door sleeve installation procedure:
1. Prepare tools: hammer, ruler, wood (brick) block, rope dao
Pencil, Minei.
Senli door sleeve, special sturdy connection capacity, etc.
2. Remove the plaster: Before installation, remove the old powder or lime at the place where the wooden bricks need to be installed, and leave the original brick wall or concrete wall.
3. Sleeve plate combination: Place the sleeve plate on the ground, fix it with special connectors, then pull the vertical line to correct the size, and fix it with a triangular correction bracket.
4. Vertical sleeve board: Before standing the sleeve board, the wall and the inside of the sleeve board at the wooden brick place must be coated with special glue, and then the sleeve board should be put into the door opening and the position and verticality should be corrected.
5. Place the wooden bricks: coat the wooden bricks with special glue, pad the position of the sleeve board and the wall, and fix the wooden bricks and the sleeve board with small nails. The thickness of the wood bricks is best matched between the wall and the sleeve board.
6. Install the door edge: After the styrofoam cures (generally 2-3 hours), disassemble the triangle bracket on the sleeve board and change the actual door edge size.
After blanking, apply special glue to the groove of the sleeve, and then gently knock the edge of the door and the door sleeve plate to fix it. (If the door edge line and the groove fit loosely, you can use the inside of the door edge line to plug tightly).
7. Install the door leaf.
-
Anonymous users2024-02-09Now many of them are finished door covers, measure the size of the hole, take the material out, assemble the door frame and fix it at the hole. Now it is enough to directly apply styrofoam, but the middle of the door frame should be supported by a wooden keel, otherwise the door frame will be deformed.
1.First consider whether the length and width of the bed are sufficient, whether the bed is flat, and whether it has good support and comfort. The height of the bed should generally be slightly higher than the bedside's knees, too high you need to always bend over, and too low it is not conducive to ventilation and is prone to moisture. >>>More
If the lock of your bedroom door sleeve is broken, you should replace it with a new lock. The simplest and most brutal way is to change the door directly, don't just think about changing the door cover. The door cover is not expensive, but I'm afraid no one can do it alone. >>>More
The sound insulation problem of bedroom doors is generally related to the material used in the door panel and door frame, and the door made of plastic steel, glass and other materials is selected, which is easy to affect the use experience with poor sound insulation. The most fundamental method is to change the door directly, and the sound insulation effect of the door is better by using the wooden series. If you are reluctant to change the door, it is recommended to use a soundproof strip affixed to the inside of the door frame.
The difference between the suit door and the traditional door 1, from the perspective of the overall material structure, there are the following differences: the "traditional" wooden door is made of pine or fir wood as the inner structure, and the outer layer is sealed with plywood (plywood) Plywood is a multi-layer board, a door leaf from the inner structure to the surface layer at least 8 glued surfaces, any glued surface problems will be reflected on the surface. Therefore, the unevenness and undulations on the surface of the "traditional" wooden door are the result of problems with the internal glued surface, while the set door is made of pine or fir solid wood as the inner structure, and the outer layer is sealed with Jixiang environmentally friendly MDF. >>>More
1. Check whether the signs outside the packaging of the purchased products are complete (including the relevant implementation standards of the product, the name and address of the manufacturer, and the date of production), whether the packaging is firm, and whether the content of the manual is consistent with the product itself, so as to prevent the exaggeration of some products and the fact that they are not consistent. >>>More