Tips for cleaning the electric fan without dismantling, how to clean the electric fan without disman

It can be cleaned with dish soap + baking soda + toilet water.

The method is very simple, prepare a small bowl and squeeze in a little dish soap, which has a particularly good ability to remove dirt, and then pour in a little baking soda, baking soda is an all-purpose detergent, and it cleans particularly strongly. Add a few drops of toilet water, which can make the cleaned electric fan emit a fragrant smell, and it also has a certain mosquito repellent effect.

First of all, you need to prepare a container, put baking soda, dish soap, white vinegar, dilute it evenly with water, and then prepare a watering can and pour it in. Then use a watering can to spray the blades of the fan and the blades behind it. For some hard-to-reach places, you can prepare a toothbrush.

Baking soda and dish soap have a very strong decontamination ability, which can effectively remove the dust of the fan and other microorganisms, while white vinegar has the effect of softening the dirt. After cleaning, prepare a basin of clean water, wipe the fan blades, body, and base with a clean rag, and finally dry it with a clean rag. <

First of all, you need to prepare a container, put baking soda, dish soap, add a little white vinegar, add water to dilute evenly, and then prepare a watering can and pour it in. Then use a watering can to spray the fan a few times, the front fan blade and the back fan blade must be sprayed, do not let go of any small parts. You can prepare a brush, and for some places that are difficult to reach, you can prepare a toothbrush.

Baking soda and dish soap have a very strong decontamination ability, which can effectively remove the dust of the fan and other microorganisms, while white vinegar has the effect of softening the dirt, and the whole cleaning process will be relatively simple. After cleaning, prepare a basin of clean water, wipe the electric fan with a clean rag, wipe the blades of the electric fan and the body of the electric fan, including the base, and finally wipe it dry with a clean rag.

Preparation materials: watering can, baking soda, white vinegar, washing spirit, water appropriate amount of cleaning method:

1. Prepare a container.

2. Pour in an appropriate amount of baking soda, white vinegar and detergent.

3. Add a little water and stir evenly into a solution.

4. Pour into the watering can and screw the cap.

5. Spray the prepared solution on the electric fan (avoid the power supply) and wait for a few minutes to dissolve the dust.

6. Turn on the fan and rotate it for about 10 minutes, and the wind will blow away the stains that have dripped down.

7. There is no need to disassemble the electric fan, the dust on it has been cleaned.

Cleaning the electric fan is so simple, no dismantling, no unloading, no washing, one spray of rapid dust removal is cleaner.

Wrap the switch in a dry towel, then spray Mr. Vermeer, and after ten minutes use the shower head to flush, the amount of water should be large, let the fan leaf turn up, and repeat it a few times.

The electric fan cleaning tips can only be wiped with a rag if you want to clean it, the operation method is as follows:

1. First of all, break the chuck of the protective mesh in the clockwise direction, as shown in the following figure:

2. Remove the front mesh cover of the electric fan after loosening, as shown in the figure below

3. Then unscrew out the shaft nut, as shown in the figure below

4. Then take out the fan blade, as shown in the figure below

5. After loosening, the net nut is manually screwed out, as shown in the following figure

6. Finally, take out the back net, as shown in the figure below

Cleaning tricks for electric fan without dismantling: white vinegar cleaning method, dish soap baking soda cleaning method, air conditioning cleaning agent cleaning method.

1. White vinegar cleaning method: use a knife to alternately draw several knives on the top of the scouring cloth, try not to cut off the scouring cloth, add an appropriate amount of dish soap and two spoons of white vinegar to the basin, and then pour in an appropriate amount of warm water, and stir all the liquid evenly. Put the treated scouring pad in it, soak all the scouring pads and then squeeze them dry, and wipe the cleaning cloth up and down along the grille of the electric fan one by one, and the grille of the electric fan can just be in the seam of the cleansing cloth.

Repeat a few times to clean up.

2. Baking soda cleaning method of dish soap: prepare a small watering can for the answer sheet, fill it with baking soda and dish soap, mix it evenly, and form its own "fan cleaning agent", directly spray the cleaning solution in the watering can on the fan blades, you can first clean the outer mesh cover with a scouring pad, and then use the cleaning liquid in the watering can to clean the fan blades inside.

3. Air conditioning cleaning agent cleaning method: as long as the cleaning agent is evenly sprayed on the grille and fan blades of the electric fan, the dense foam will cover the dirt, and the dirt will be automatically dissolved.

Daily maintenance method of electric fan

1. Do a good job in the maintenance of plating parts. Use a soft cloth to wipe off the dust and moisture on the plated parts, and then apply a thin layer of engine oil to help protect them. Please note that it must be wiped clean before oiling, otherwise the water is not easy to evaporate after oiling, which may cause corrosion dust spots and rust of the plated parts.

2. Do a good job of maintaining the paint parts. Wipe it off with a soft cloth, and if the stain on it is not easy to wipe off, you can scrub it with soapy water with less alkali content, or wipe it with a small amount of kerosene, then wash it and wipe it dry. After disassembling the blade, wrap it in soft paper and place it between the front and rear grilles to avoid the deformation of the angle of the blade.

3. When the weather turns cool, the electric fan that has been used for a summer should be collected, and the oil and dust on the surface should be completely removed before collecting the fan, and wiped with a dry soft cloth, and then wrapped in kraft paper or clean cloth.

Here's how:

Tools: electric fan, brush, compressed air, cloth.

1. Turn off the fan. Unplug the power switch from the fan or turn it off from the wall. Before cleaning the fan, make sure the blades stop turning completely.

2. Vacuum fan holder and safety net. Connect the vacuum's accessory brush to the end of the vacuum hose and turn on the vacuum. Slide the vacuum hose onto the fan to absorb accumulated dust and dirt. Clean from top to bottom.

3. Spray compressed air on the blades of the fan. Buy a can of compressed air. Thread the straw through the sheer and press the switch on the can to expel the air from the straw.

Blow on each blade of the fan until they are free of dust. When spraying, place the compressed air tank face up.

4. Wipe the fan with a microfiber cloth. Start at the top of the fan and wipe back and forth. Wipe down the protective mesh, base, and back of the fan. Do this once a week to keep the fan clean.

A few precautions for cleaning the fan:

1. When cleaning the fan, it is best to unplug the power supply, and then wipe it with a soft cloth, and wipe it with a damp soft cloth for the marked places, but do not clean it directly with a large amount of water.

2. There is no need to disassemble the fan for daily cleaning, but it is still necessary to disassemble and clean it after using it for a long time, mainly for the cleaning of the internal motor, so as not to affect the normal performance.

3. The leaves of the electric fan are usually plastic, so it is generally possible to carefully wipe off the dust and dirt with a sponge dipped in detergent.

Now that it has entered July, I believe that many people will use electric fans in addition to turning on the air conditioner at home, but because they have not used it for a year, dust will accumulate on the surface of the electric fan, and sometimes it will not be able to use normally. Then the electric fan should be cleaned if it is dirty, but some people are too lazy to disassemble and wash, what should they do?

First, the electric fan does not need to be disassembled and washed.

Sometimes many people don't want to disassemble the electric fan, but we can also make the electric fan clean and new immediately through the following methods.

1. First of all, you need to prepare a container, put baking soda, dish soap, add a little white vinegar, add water to dilute evenly, and then prepare a watering can and pour it in.

2. Next, spray a few times on the fan with a watering can, the front fan blade and the back fan blade must be sprayed, and do not let go of any small parts.

3. Then we can prepare a brush, for some places that are difficult to reach, we can prepare a toothbrush. Baking soda and dish soap have a very strong decontamination ability, which can effectively remove the dust of the fan and other microorganisms, while white vinegar has the effect of softening the dirt, so the whole cleaning process will be relatively simple.

4. After cleaning, prepare a basin of clean water, wipe the electric fan with a clean rag, wipe the blades of the electric fan and the body of the electric fan, including the base, and finally wipe it dry with a clean rag.

Second, whether to turn on the air conditioner or not?

1. Many people are accustomed to turning on the air conditioner and then turning on the electric fan, which is also reasonable. Because you will find that turning on the electric fan can effectively speed up the flow of indoor air, which can quickly reduce the temperature in the room.

2. After turning on the fan, you don't need to set the temperature of the air conditioner to how low it is, and it can feel very cool. However, we should pay attention to the fact that when turning on the air conditioner and the fan, do not blow the fan directly at the person, otherwise it will also cause a cold.

Summary: If the electric fan at home is dirty, you can choose the way of dismantling and washing, and mix it evenly with dish soap, baking soda, and white vinegar at home, you can form a very good little helper for decontamination and better clean the electric fan at home.

You can use a vacuum cleaner or brush to clean the fan without disassembling it.

Aim the nozzle of the vacuum cleaner at the fan and use a medium suction vacuum cleaner to clean the surface and inside of the fan. Be careful not to use excessive force to avoid damaging the fan. You can use a soft-bristled brush or toothbrush to gently brush the blades and surfaces of the fan to remove dirt and dirt.

Be careful not to overexert force to avoid deformation or damage to the blades.

In addition, during the use of the fan, the surface of the fan can be cleaned regularly to avoid excessive accumulation of dust and dirt, which will affect the use effect of the fan. At present, the fans on the market mainly include desktop fans, floor fans, wall-mounted fans, tower fans, etc., when purchasing, you can choose the type that suits you according to your needs.

There are precautions to be taken when choosing a fan

1. Air volume: The air volume of the fan is directly related to the use effect of the fan. Generally speaking, the higher the air volume, the better the fan effect, but at the same time, it will also produce noise, so you need to choose according to the actual needs.

2. Fan blade material: The material of the fan blade will also affect the use effect of the fan. Generally speaking, a fan with metal blades has a large airflow but is relatively noisy; The fan with plastic blades is less noisy but has a relatively small airflow.

3. Noise level: The noise level of the fan is also a factor to consider. Generally speaking, the quieter the fan**, the higher it is.

4. Energy consumption: The energy consumption of the fan is also a factor to consider. Generally speaking, the energy consumption of fans with large air volume is also relatively high, so you need to choose according to your actual needs.

5. Safety: The safety of the fan is also a factor to consider. Generally speaking, it is safer and more reliable to choose a fan with manual modification and anti-dumping protection and overheating protection.

6. Brand and**: It is more reliable to choose a fan of a well-known brand, but it is also relatively high. You can choose the right fan for you according to your needs and budget.

The method of cleaning the fan does not need to be disassembled. The fan wants to be clear and not have to be disassembled. Then you can take a damp rag.

Dip in detergent. Don't screw it too dry. Then wipe it where the electric fan has dust.

Finally, throw the rag with clean water, wring the whole out, and wipe the electric fan again. Dry it and you're good to go.

If you don't want to dismantle the fan, then the best thing to do is to let him keep spinning, or you can take a hair dryer to dry the dust for him, maybe for a long time.